wirelessSensorPodStatusAlarmStatus

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.10.5.2.1.1.26
MIB view Table view

Object

column mandatory Integer32 
The alarm status of the wireless pod sensor.  This integer should be interpreted
as a bit map, with each bit representing the presence or absence of
the specific alarm conditions listed below.  The bit will be '1' if
the condition is present, and '0' if the condition is not present.
              
Bit  Hex. Value  Description
1    0x0001      Maximum temperature exceeded.
2    0x0002      High temperature exceeded.
3    0x0004      Low temperature exceeded.
4    0x0008      Minimum temperature exceeded.
5    0x0010      Maximum humidity exceeded.
6    0x0020      High humidity exceeded.
7    0x0040      Low humidity exceeded.
8    0x0080      Minimum humidity exceeded.
9    0x0100      Low battery exceeded.
10   0x0200      Minimum battery exceeded.
11   0x0400      Low signal strength exceeded.
12   0x0800      Minimum signal strength exceeded.
13   0x1000      Sensor inactive.
14   0x2000      Dry contact in Critical state.
15   0x4000      Dry contact in warning state.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.10.5.2.1.1.26
Type
column
Access
readonly
Status
mandatory
Parent
wirelessSensorPodStatusEntry
Table
wirelessSensorPodStatusTable
Siblings
25

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wirelessSensorPodStatusIndex mandatory
The index to the pod sensor entry.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.1
wirelessSensorPodStatusHighHumidityThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.10
wirelessSensorPodStatusLowHumidityThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.11
wirelessSensorPodStatusCommStatus mandatory
The communication status of the wireless sensor. inactive(0) indicates pod sensor is in the wireless network but not sending information. active(1) indicates wireless sensor is li…
columnEnumeration.1.3.6.1.4.1.318.1.1.10.5.2.1.1.12
wirelessSensorPodStatusMaxTempThresh mandatory
Values are displayed in tenths of degrees in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit).
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.13
wirelessSensorPodStatusMinTempThresh mandatory
Values are displayed in tenths of degrees in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit).
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.14
wirelessSensorPodStatusMaxHumidityThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.15
wirelessSensorPodStatusMinHumidityThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.16
wirelessSensorPodStatusDryContactState mandatory
State of the dry contact. If the dry contact is closed, the drycontactClosed (1) value will be returned. If the dry contact state is open, the drycontactOpen (0) value will be ret…
columnEnumeration.1.3.6.1.4.1.318.1.1.10.5.2.1.1.17
wirelessSensorPodStatusDryContactNormalState mandatory
The normal state of the dry contact. If the normal state is closed, the normallyClosed (1) value will be returned. If the normal state is open, the normallyOpen (0) value will be …
columnEnumeration.1.3.6.1.4.1.318.1.1.10.5.2.1.1.18
wirelessSensorPodStatusBattery mandatory
Values are displayed in tenths of Volts DC.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.19
wirelessSensorPodPortIndex mandatory
The pod sensor port index.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.2
wirelessSensorPodStatusLowBatteryThresh mandatory
Values are displayed in tenths of Volts DC.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.20
wirelessSensorPodStatusMinBatteryThresh mandatory
Values are displayed in tenths of Volts DC.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.21
wirelessSensorPodStatusRssi mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.22
wirelessSensorPodStatusLowRssiThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.23
wirelessSensorPodStatusMinRssiThresh mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.24
wirelessSensorPodStatusLocation mandatory
The location of the wireless sensor pod.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.5.2.1.1.25
wirelessSensorPodStatusExtAddr mandatory
The extended address is the combination of the unique 10 byte MAC address of the sensor concatenated with its short address.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.5.2.1.1.3
wirelessSensorPodStatusName mandatory
The name of the sensor pod.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.5.2.1.1.4
wirelessSensorPodStatusAlarmGeneration mandatory
Status of whether alarm generation is enabled or disabled.
columnEnumeration.1.3.6.1.4.1.318.1.1.10.5.2.1.1.5
wirelessSensorPodStatusTemperature mandatory
Values are displayed in tenths of degrees in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit).
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.6
wirelessSensorPodStatusHighTempThresh mandatory
Values are displayed in tenths of degrees in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit).
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.7
wirelessSensorPodStatusLowTempThresh mandatory
Values are displayed in tenths of degrees in the scale shown in the emsStatusSysTempUnits OID (Celsius or Fahrenheit).
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.8
wirelessSensorPodStatusHumidity mandatory
Values are represented in whole number percentage.
columnInteger32.1.3.6.1.4.1.318.1.1.10.5.2.1.1.9