memSensorsTempShortDecRateThreshValue
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.11
Object
column
mandatory
r/w
Integer32
The value of the temperature short-term decreasing rate time that will cause an alarm to be generated. The temperature scale is based on the memSensorsStatusSysTempUnits OID.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.10.4.2.5.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- memSensorsConfigEntry
- Table
- memSensorsConfigTable
- Siblings
- 24
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| memSensorsConfigModuleNumber mandatory The number of the module that the sensor is attached to. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.1 |
| memSensorsTempThreshHysteresis mandatory The change in temperature required to cause a
temperature alarm to change from an active to an inactive state.
The temperature scale is based on the memSensorsStatusSysTempUnits O… | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.10 |
| memSensorsTempShortDecRateThreshTime mandatory The time over which the temperature may not decrease
beyond the value specified by the temperature short-term
decreasing rate threshold value. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.12 |
| memSensorsTempShortIncRateThreshValue mandatory The value of the temperature short-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.13 |
| memSensorsTempShortIncRateThreshTime mandatory The time over which the temperature may not increase
beyond the value specified by the temperature short-term
increasing rate threshold value. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.14 |
| memSensorsTempLongDecRateThreshValue mandatory The value of the temperature long-term decreasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.15 |
| memSensorsTempLongDecRateThreshTime mandatory The time over which the temperature may not decrease
beyond the value specified by the temperature long-term
decreasing rate threshold value. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.16 |
| memSensorsTempLongIncRateThreshValue mandatory The value of the temperature long-term increasing rate
time that will cause an alarm to be generated.
The temperature scale is based on the memSensorsStatusSysTempUnits OID. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.17 |
| memSensorsTempLongIncRateThreshTime mandatory The time over which the temperature may not increase
beyond the value specified by the temperature long-term
increasing rate threshold value. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.18 |
| memSensorsHumidityMaxThresh mandatory The humidity at which the maximum humidity threshold alarm
will be generated. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.19 |
| memSensorsConfigSensorNumber mandatory The number of this sensor on the module. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.2 |
| memSensorsHumidityHighThresh mandatory The humidity at which the high humidity threshold alarm
will be generated. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.20 |
| memSensorsHumidityLowThresh mandatory The humidity at which the low humidity threshold alarm
will be generated. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.21 |
| memSensorsHumidityMinThresh mandatory The humidity at which the minimum humidity threshold alarm
will be generated. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.22 |
| memSensorsHumidityThreshHysteresis mandatory The change in humidity required to cause an active humidity
alarm to change to the inactive state. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.23 |
| memSensorsVoltMaxThresh mandatory The voltage in tenths of volts at which the MEM will generate a maximum
voltage threshold violation alarm on this sensor. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.24 |
| memSensorsVoltMinThresh mandatory The voltage in tenths of volts at which the MEM will generate a minimum
voltage threshold violation alarm on this sensor. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.25 |
| memSensorsName mandatory A descriptive name for the sensor. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.3 |
| memSensorsLocation mandatory The location of the sensor. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.4 |
| memSensorsAlarmGeneration mandatory Enable or disable alarm generation on this sensor. | column | Enumeration | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.5 |
| memSensorsTempMaxThresh mandatory The temperature at which the MEM will generate a maximum
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits O… | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.6 |
| memSensorsTempHighThresh mandatory The temperature at which the MEM will generate a high
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.7 |
| memSensorsTempLowThresh mandatory The temperature at which the MEM will generate a low
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits OID. | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.8 |
| memSensorsTempMinThresh mandatory The temperature at which the MEM will generate a minimum
temperature threshold violation alarm on this sensor.
The temperature scale is based on the memSensorsStatusSysTempUnits O… | column | Integer32 | .1.3.6.1.4.1.318.1.1.10.4.2.5.1.9 |