upsOutletGroupConfigPowerOnDelay

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.12.2.2.1.3
MIB view Table view

Object

column mandatory r/w Integer32 
The amount of time (seconds) the outlet group will delay
powering on when the delayed on, reboot, or shutdown command is
applied. Allowed values vary by UPS model. The value of -1 is
used for Never if supported by the UPS and the outlet group.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.3
Type
column
Access
readwrite
Status
mandatory
Parent
upsOutletGroupConfigEntry
Table
upsOutletGroupConfigTable
Siblings
13

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsOutletGroupConfigIndex mandatory
The index to the outlet group entry.
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.1
upsOutletGroupConfigLoadShedControlTimeOnBattery mandatory
Configures whether the outlet group will load shed (turn off) after the UPS device's time on battery has exceeded the upsOutletGroupConfigLoadShedTimeOnBattery OID setting. The se…
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.10
upsOutletGroupConfigLoadShedControlRuntimeRemaining mandatory
Configures whether the outlet group will load shed (turn off) when the UPS is on battery and the remaining runtime is less than the upsOutletGroupConfigLoadShedRuntimeRemaining OI…
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.11
upsOutletGroupConfigLoadShedControlInOverload mandatory
Configures whether the outlet group will load shed (turn off) when the UPS is in an overload condition. The setting for upsOutletGroupConfigLoadShedControlSkipOffDelay is valid fo…
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.12
upsOutletGroupConfigLoadShedTimeOnBattery mandatory
When the UPS has been on battery for more time than this value, the outlet group will turn off if this condition is enabled by the upsOutletGroupConfigLoadShedControlTimeOnBattery…
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.13
upsOutletGroupConfigLoadShedRuntimeRemaining mandatory
When the runtime remaining is less than this value, the outlet group will turn off if this condition is enabled by the upsOutletGroupConfigLoadShedControlRuntimeRemaining OID. All…
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.14
upsOutletGroupConfigName mandatory
The name of the outlet group.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.12.2.2.1.2
upsOutletGroupConfigPowerOffDelay mandatory
The amount of time (seconds) the outlet group will delay powering off when the delayed off, reboot, or shutdown command is applied. Allowed values vary by UPS model. The value of …
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.4
upsOutletGroupConfigRebootDuration mandatory
During a reboot sequence, power is turned off and then back on. This OID defines the amount of time to wait (seconds) after turning the power off, at the start of the sequence, be…
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.5
upsOutletGroupConfigMinReturnRuntime mandatory
In an Outlet Group shutdown sequence, the Outlet Group cycles power off then on. This OID defines the minimum amount of UPS runtime (seconds) that is required in order to power th…
columnInteger32.1.3.6.1.4.1.318.1.1.1.12.2.2.1.6
upsOutletGroupConfigOutletType mandatory
Getting this variable will return the type of outlet group. If present in the system, the main outlet group is 'unswitched' and must be on in order for any of the switched outlet …
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.7
upsOutletGroupConfigLoadShedControlSkipOffDelay mandatory
Configures whether the outlet group's off delay setting (upsOutletGroupConfigPowerOffDelay) will be used in a load shedding situation, where applicable.
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.8
upsOutletGroupConfigLoadShedControlAutoRestart mandatory
Configures whether the outlet group will automatically restart after a load shedding situation, where applicable.
columnEnumeration.1.3.6.1.4.1.318.1.1.1.12.2.2.1.9