sPDUOutletConfigMSPgsDeviceConfirm
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.6
Object
column
mandatory
r/w
Enumeration
Setting this OID to deviceConfirmNo (1) cause the outlet to
NOT wait for device confirmation while performing graceful
operations.
Setting this OID to deviceConfirmYes (2) cause the outlet to
wait for device confirmation while performing graceful
operations.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.6.6.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- sPDUOutletConfigMSPgsEntry
- Table
- sPDUOutletConfigMSPgsTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | deviceConfirmNo |
2 | deviceConfirmYes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sPDUOutletConfigMSPgsIndex mandatory The index to the MasterSwitch plus. | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.1 |
| sPDUOutletConfigMSPgsPowerOnDelay mandatory The amount of delay, in seconds, between the UPS entering
normal (on-line) state and the outlet being powered on.
Allowed values are:
-1 - Remain Off… | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.10 |
| sPDUOutletConfigMSPgsPowerOffDelay mandatory The amount of delay, in seconds, between when the server
shuts down and the outlet is powered off.
Allowed values are:
0 - 9999 seconds (0 - 2 hrs, 4… | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.11 |
| sPDUOutletConfigMSPgsBattCapThresh mandatory The minimum battery capacity, as a percent (0-100%), required
of the UPS before an outlet will be allowed to power on.
Allowed values are:
0 - 100 pe… | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.12 |
| sPDUOutletConfigMSPgsRebootDuration mandatory The amount of delay, in seconds, from outlet off until
outlet on during a reboot.
Allowed values are:
0 - 9999 seconds (0 - 2 hrs, 46 mins, 39 secs). | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.13 |
| sPDUOutletConfigMSPgsName mandatory The name of the MasterSwitch plus. The maximum
value is 23 characters. The name is set by
using the sPDUMasterConfigMSPName OID. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.2 |
| sPDUOutletConfigMSPgsOutletIndex mandatory The index to the outlet entry. | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.3 |
| sPDUOutletConfigMSPgsOutletName mandatory The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.4 |
| sPDUOutletConfigMSPgsOutletCtrlMode mandatory The Control Mode of the outlet.
This OID is provided for informational purposes only. | column | Enumeration | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.5 |
| sPDUOutletConfigMSPgsLowBattWarning mandatory The amount of delay, in 6 second intervals, between
when the UPS goes on battery and the power down sequence for
the outlet is initiated.
Allowed values are:
… | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.7 |
| sPDUOutletConfigMSPgsLowBattMult mandatory Only applicable if sPDUOutletConfigMSPgsLowBattWarning OID is
set to -1 (On Runtime Remaining).
Allows you to set the value to stagger the shutdown sequence of the … | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.8 |
| sPDUOutletConfigMSPgsRestartDelay mandatory The amount of delay, in 6 minute intervals, between
when the outlet is turned off and the outlet is turned back on
when performing a Graceful Shutdown.
Allowed valu… | column | Integer32 | .1.3.6.1.4.1.318.1.1.6.6.2.1.1.9 |