ats5gEnvConfigHumHysteresis
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.33.4.1.13
Object
column
mandatory
r/w
Integer32
This is the configured humidity threshold hysteresis reported in %RH. The value reports as -1 if the attached sensor does not support humidity measurements.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.33.4.1.13- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ats5gDeviceEnvironmentEntry
- Table
- ats5gDeviceEnvironmentTable
- Siblings
- 17
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ats5gEnvDeviceIndex mandatory This value is the data entry's index in the environment table. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.1 |
| ats5gEnvHumidity mandatory This is the measured humidity around the attached sensor reported in percent relative
humidity. The value reports as -1 if the attached sensor does not support humidity
measuremen… | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.10 |
| ats5gEnvConfigHumLowThreshold mandatory This is the configured low humidity threshold reported in %RH. The value reports as -1
if the attached sensor does not support humidity measurements. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.11 |
| ats5gEnvConfigHumMinThreshold mandatory This is the configured minimum humidity threshold reported in %RH. The value reports
as -1 if the attached sensor does not support humidity measurements. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.12 |
| ats5gEnvConfigHumAlarmsEnabled mandatory This is the configured humidity monitoring status. While this value is disabled(1),
no humidity-related alarms will be active. The value reports as -1 if the attached
sensor does … | column | Enumeration | .1.3.6.1.4.1.318.1.1.33.4.1.14 |
| ats5gEnvPeakTemperature mandatory This is the highest temperature recorded since the last peak temperature reset,
reported in degrees Fahrenheit. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.15 |
| ats5gEnvPeakTempTime mandatory This is the date and time that the peak temperature was recorded. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.33.4.1.16 |
| ats5gEnvPeakTempResetTime mandatory This is the date and time that the peak temperature was last reset. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.33.4.1.17 |
| ats5gEnvControlPeakTempReset mandatory This control resets the peak temperature when the value is set to reset(2). | column | Enumeration | .1.3.6.1.4.1.318.1.1.33.4.1.18 |
| ats5gEnvModuleID mandatory This value is the ats5gIdentConfigModuleID of the device being queried. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.2 |
| ats5gEnvSensorType mandatory This value is the type of the currently attached sensor accessory. | column | Enumeration | .1.3.6.1.4.1.318.1.1.33.4.1.3 |
| ats5gEnvAlarmStatus mandatory This is the severity of the most severe environment-specific alarm currently active. | column | Enumeration | .1.3.6.1.4.1.318.1.1.33.4.1.4 |
| ats5gEnvTemperature mandatory This is the measured temperature of the attached sensor reported in tenth-degrees
Fahrenheit. The value reports as -1 if the attached sensor does not support temperature
measureme… | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.5 |
| ats5gEnvConfigTempMaxThreshold mandatory This is the configured maximum temperature threshold reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.6 |
| ats5gEnvConfigTempHighThreshold mandatory This is the configured high temperature threshold reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.7 |
| ats5gEnvConfigTempHysteresis mandatory This is the configured temperature threshold hysteresis reported in degrees Fahrenheit.
The value reports as -1 if the attached sensor does not support temperature measurements. | column | Integer32 | .1.3.6.1.4.1.318.1.1.33.4.1.8 |
| ats5gEnvConfigTempAlarmsEnabled mandatory This is the configured temperature monitoring status. While this value is disabled(1),
no temperature-related alarms will be active. The value reports as -1 if the attached
sensor… | column | Enumeration | .1.3.6.1.4.1.318.1.1.33.4.1.9 |