pmmInputVoltageMinimumAlarm
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.43
Object
column
mandatory
r/w
Integer32
Voltage minimum alarm generation status. 1 - enabled 2 - disabled 3 - unknown
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.28.3.1.2.1.43- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- pmmInputEntry
- Table
- pmmInputTable
- Siblings
- 55
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pmmInputMeterIndex mandatory The input meter identifier. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.1 |
| pmmInputFrequencyDeviation mandatory Displays the input frequency deviation in Hertz.
Threshold write returns as unsuccessful if one of the breaker threshold
groups does not meet conditions. In this case, read the t… | column | Enumeration | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.10 |
| pmmInputPowerFactorDeviation mandatory Displays the input power factor deviation. Specified in tenths.
A value of zero indicates that the threshold is disabled.
Returns -1 if unsupported.
Threshold write returns as uns… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.11 |
| pmmInputMinVoltThreshold mandatory Threshold below which an input minimum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.12 |
| pmmInputLowVoltThreshold mandatory Threshold below which an input low voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A … | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.13 |
| pmmInputHighVoltThreshold mandatory Threshold above which an input high voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage.
A… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.14 |
| pmmInputMaxVoltThreshold mandatory Threshold above which an input maximum voltage condition
will be generated. Specified as percent deviation from
nominal voltage represented in the OID pmmDeviceNominalInputVoltage… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.15 |
| pmmInputMinCurrentThreshold mandatory Threshold below which an input minimum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is dis… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.16 |
| pmmInputLowCurrentThreshold mandatory Threshold below which an input low current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disable… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.17 |
| pmmInputHighCurrentThreshold mandatory Threshold above which an input high current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is disabl… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.18 |
| pmmInputMaxCurrentThreshold mandatory Threshold above which an input maximum current condition will be generated.
Specified as a percent of the panel breaker rating.
A value of zero indicates that the threshold is dis… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.19 |
| pmmInputFrequency mandatory The input frequency in tenths of Hertz. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.2 |
| pmmInputMinApparentPowerThreshold mandatory Threshold below which an input minimum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the t… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.20 |
| pmmInputMaxApparentPowerThreshold mandatory Threshold above which an input maximum apparent power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the t… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.21 |
| pmmInputOverActivePowerThreshold mandatory Threshold above which an input over active power condition will be generated.
Specified as a percent deviation from nominal power rating.
A value of zero indicates that the thresh… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.22 |
| pmmInputBreakerState mandatory This value indicates the current state of input breaker.
1 will indicate open,
2 will indicate closed,
3 will indicate unknown.
Returns -1 if unsupported or failed. | column | Enumeration | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.23 |
| pmmInputBreakerOpenAlarm mandatory Breaker open alarm status.
1 will indicate enabled,
2 will indicate disabled,
3 will indicate unknown. | column | Enumeration | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.24 |
| pmmInputAverageCurrent mandatory Input Average current. Measured in tenths of Amps. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.25 |
| pmmInputNeturalCurrent mandatory Input Neutral current. Measured in tenths of Amps. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.26 |
| pmmInputMaxInstantaneousNeutralCurrent mandatory Input maximum instantaneous neutral current. Measured in tenths of Amps. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.27 |
| pmmInputAverageCurrentTHD mandatory Input average harmonic distortions.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.28 |
| pmmInputAverageVoltageLtoL mandatory Input Average Line to Line voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.29 |
| pmmInputTotalActivePower mandatory Shows the total input active power in tenths of kW. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.3 |
| pmmInputAverageVoltageLtoN mandatory Input Average Line to Neutral voltage. Measured in tenths of Volts.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.30 |
| pmmInputLoad mandatory Total load of input breaker in percentage. Measured in tenths of percent.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.31 |
| pmmInputMeterFirmwareVersion mandatory Shows the input meter firmware version.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.32 |
| pmmInputMeterSerialNumber mandatory Shows the input meter serial number.
Returns -1 if unsupported or failed. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.33 |
| pmmInputEnergyUsageAccumulatedTotal mandatory Shows the total accumulated input energy usage in kWh.
Measured in tenths of kWh.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.34 |
| pmmInputPhaseLoss mandatory Threshold below which an input phase loss condition will be generated.
Specified as a percent deviation from phase to neutral nominal voltage.
A value of zero indicates that the t… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.35 |
| pmmInputBreakerCTSize mandatory Shows the input breaker CT size.
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.36 |
| pmmInputBreakerRating mandatory Shows the input breaker rating in Amps(A).
Returns -1 if unsupported or failed. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.37 |
| pmmInputKWHResetDate mandatory The date that the kWh usage was reset, in the format mm/dd/yyyy. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.38 |
| pmmInputAlarmGeneration mandatory Alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.39 |
| pmmInputTotalApparentPower mandatory Shows the total input apparent power in tenths of kVA. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.4 |
| pmmInputVoltageMaximumAlarm mandatory Voltage maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.40 |
| pmmInputVoltageHighAlarm mandatory Voltage high alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.41 |
| pmmInputVoltageLowAlarm mandatory Voltage low alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.42 |
| pmmInputCurrentMaximumAlarm mandatory Current maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.44 |
| pmmInputCurrentHighAlarm mandatory Current high alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.45 |
| pmmInputCurrentLowAlarm mandatory Current low alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.46 |
| pmmInputCurrentMinimumAlarm mandatory Current minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.47 |
| pmmInputApparentPowerMaximumAlarm mandatory Apparent Power maximum alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.48 |
| pmmInputApparentPowerMinimumAlarm mandatory Apparent Power minimum alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.49 |
| pmmInputTotalPowerFactor mandatory Indicates the total power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths.
Returns -255 if unsupported | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.5 |
| pmmInputKWOverAlarm mandatory Over active power alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.50 |
| pmmInputPhaseLossAlarm mandatory Phase loss alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.51 |
| pmmInputPowerFactorTotalAlarm mandatory Total power factor alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.52 |
| pmmInputFrequencyDeviationAlarm mandatory Frequency deviation alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.53 |
| pmmInputNeutralOverCurrentAlarm mandatory Neutral Overcurrent alarm generation status.
1 - enabled
2 - disabled
3 - unknown | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.54 |
| pmmInputNeutralOverCurrentThreshold mandatory Threshold above which an input neutral overcurrent condition will be generated.
Specified as a percent deviation from nominal current.
A value of zero indicates that the threshold… | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.55 |
| pmmInputAveragePowerFactor mandatory Indicates the average power factor. A value of 100 representing
a unity power factor (1.00). Specified in hundredths.
Returns -255 if unsupported. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.56 |
| pmmInputActiveEnergyDelivered mandatory Shows the input active energy delivered in tenths of kWh. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.6 |
| pmmInputActiveEnergyReceived mandatory Shows the input active energy received in tenths of kWh. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.7 |
| pmmInputApparentEnergyDelivered mandatory Shows the input apparent energy delivered in tenths of kVAh. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.8 |
| pmmInputApparentEnergyReceived mandatory Shows the input apparent energy received in tenths of kVAh. | column | Integer32 | .1.3.6.1.4.1.318.1.1.28.3.1.2.1.9 |