memInputAnalogCalibrationPoint1Value

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.10.4.3.4.1.15
MIB view Table view

Object

column mandatory r/w RFC1213-MIBDisplayString 
The value of the input, in units of measure defined by
the user, that corresponds to the current setting at the
first calibration point.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.10.4.3.4.1.15
Type
column
Access
readwrite
Status
mandatory
Parent
memInputsConfigEntry
Table
memInputsConfigTable
Siblings
24

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
memInputsConfigModuleNumber mandatory
The number of the module that the input is attached to.
columnInteger32.1.3.6.1.4.1.318.1.1.10.4.3.4.1.1
memInputAnalogCalibrationPoint1 mandatory
The electrical value that the input sensor will measure at the first calibration point. This OID is relevant only for inputs configured as analog type (ma or V).
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.10
memInputAnalogCalibrationPoint2 mandatory
The electrical value that the input sensor will measure at the second calibration point. This OID is relevant only for inputs configured as analog type (ma or V).
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.11
memInputAnalogCalibrationPoint3 mandatory
The electrical value that the input sensor will measure at the third calibration point. This OID is relevant only for inputs configured as analog type (ma or V).
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.12
memInputAnalogCalibrationPoint4 mandatory
The electrical value that the input sensor will measure at the fourth calibration point. This OID is relevant only for inputs configured as analog type (ma or V).
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.13
memInputAnalogCalibrationPoint5 mandatory
The electrical value that the input sensor will measure at the fifth calibration point. This OID is relevant only for inputs configured as analog type (ma or V).
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.14
memInputAnalogCalibrationPoint2Value mandatory
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the second calibration point.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.16
memInputAnalogCalibrationPoint3Value mandatory
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the third calibration point.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.17
memInputAnalogCalibrationPoint4Value mandatory
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fourth calibration point.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.18
memInputAnalogCalibrationPoint5Value mandatory
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fifth calibration point.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.19
memInputsConfigInputNumber mandatory
The number of this input on the module.
columnInteger32.1.3.6.1.4.1.318.1.1.10.4.3.4.1.2
memInputAnalogMeasurementUnits mandatory
The units of measure to be used for this input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.20
memInputAnalogMaxThresh mandatory
The input value at which a maximum threshold violation alarm will be generated on this input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.21
memInputAnalogHighThresh mandatory
The input value at which a high threshold violation alarm will be generated on this input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.22
memInputAnalogLowThresh mandatory
The input value at which a low threshold violation alarm will be generated on this input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.23
memInputAnalogMinThresh mandatory
The input value at which a minimum threshold violation alarm will be generated on this input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.24
memInputAnalogThreshHysteresis mandatory
The change in value required to cause an alarm on this input to change from active to inactive.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.25
memInputName mandatory
The name of the input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.3
memInputLocation mandatory
The location of the input.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.10.4.3.4.1.4
memInputType mandatory
The type of input this contact will take.
columnEnumeration.1.3.6.1.4.1.318.1.1.10.4.3.4.1.5
memInputAlarmGeneration mandatory
Enable or disable alarm generation on this input.
columnEnumeration.1.3.6.1.4.1.318.1.1.10.4.3.4.1.6
memInputNormalState mandatory
Defines the normal (no alarm) state of the input.
columnEnumeration.1.3.6.1.4.1.318.1.1.10.4.3.4.1.7
memInputAbnormalSeverity mandatory
Defines the severity of the event that is associated with the abnormal state of the input. This OID will return inputSeverityNotApplicable(4) for analog input types.
columnEnumeration.1.3.6.1.4.1.318.1.1.10.4.3.4.1.8
memInputNumberCalibrationPoints mandatory
The number of calibration points that are required for this input.
columnInteger32.1.3.6.1.4.1.318.1.1.10.4.3.4.1.9