upsOutletGroupConfigLoadShedControlTimeOnBattery
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.10
Object
column
mandatory
r/w
Enumeration
Configures whether the outlet group will load shed (turn off) after the UPS device's time on battery has exceeded the upsOutletGroupConfigLoadShedTimeOnBattery OID setting. The settings for upsOutletGroupConfigLoadShedControlSkipOffDelay and upsOutletGroupConfigLoadShedControlAutoRestart are valid for this load shed condition.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.1.12.2.2.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- upsOutletGroupConfigEntry
- Table
- upsOutletGroupConfigTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | upsOutletGroupConfigDisableTimeOnBatteryLoadShed |
2 | upsOutletGroupConfigEnableTimeOnBatteryLoadShed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsOutletGroupConfigIndex mandatory The index to the outlet group entry. | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.1 |
| upsOutletGroupConfigLoadShedControlRuntimeRemaining mandatory Configures whether the outlet group will load shed (turn off)
when the UPS is on battery and the remaining runtime is less
than the upsOutletGroupConfigLoadShedRuntimeRemaining OI… | column | Enumeration | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.11 |
| upsOutletGroupConfigLoadShedControlInOverload mandatory Configures whether the outlet group will load shed (turn off)
when the UPS is in an overload condition. The setting for
upsOutletGroupConfigLoadShedControlSkipOffDelay is valid fo… | column | Enumeration | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.12 |
| upsOutletGroupConfigLoadShedTimeOnBattery mandatory When the UPS has been on battery for more time than this
value, the outlet group will turn off if this condition is
enabled by the upsOutletGroupConfigLoadShedControlTimeOnBattery… | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.13 |
| upsOutletGroupConfigLoadShedRuntimeRemaining mandatory When the runtime remaining is less than this value, the outlet
group will turn off if this condition is enabled by the
upsOutletGroupConfigLoadShedControlRuntimeRemaining OID.
All… | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.14 |
| upsOutletGroupConfigName mandatory The name of the outlet group. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.2 |
| upsOutletGroupConfigPowerOnDelay mandatory The amount of time (seconds) the outlet group will delay
powering on when the delayed on, reboot, or shutdown command is
applied. Allowed values vary by UPS model. The value of -1… | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.3 |
| upsOutletGroupConfigPowerOffDelay mandatory The amount of time (seconds) the outlet group will delay
powering off when the delayed off, reboot, or shutdown command is
applied. Allowed values vary by UPS model. The value of … | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.4 |
| upsOutletGroupConfigRebootDuration mandatory During a reboot sequence, power is turned off and then
back on. This OID defines the amount of time to wait
(seconds) after turning the power off, at the start
of the sequence, be… | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.5 |
| upsOutletGroupConfigMinReturnRuntime mandatory In an Outlet Group shutdown sequence, the Outlet Group cycles
power off then on. This OID defines the minimum amount of UPS
runtime (seconds) that is required in order to power th… | column | Integer32 | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.6 |
| upsOutletGroupConfigOutletType mandatory Getting this variable will return the type of outlet group.
If present in the system, the main outlet group is
'unswitched' and must be on in order for any of the switched
outlet … | column | Enumeration | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.7 |
| upsOutletGroupConfigLoadShedControlSkipOffDelay mandatory Configures whether the outlet group's off delay setting
(upsOutletGroupConfigPowerOffDelay) will be used in a load
shedding situation, where applicable. | column | Enumeration | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.8 |
| upsOutletGroupConfigLoadShedControlAutoRestart mandatory Configures whether the outlet group will automatically restart
after a load shedding situation, where applicable. | column | Enumeration | .1.3.6.1.4.1.318.1.1.1.12.2.2.1.9 |