Webio-Digital-MIB-US Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

160

Rows

160

Columns

1,418

wtWebioEA12x12InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA12x12InputEntry entry .1.3.6.1.4.1.5040.1.2.4.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.1.3.1.1`
wtWebioEA12x12InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.1.3.1.2`
wtWebioEA12x12InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.1.3.1.3`
wtWebioEA12x12InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.1.3.1.4`

wtWebioEA12x12OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA12x12OutputEntry entry .1.3.6.1.4.1.5040.1.2.4.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.1.5.1.1`
wtWebioEA12x12OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.1.5.1.2`

wtWebioEA12x12BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA12x12BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.4.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12BinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.2.1.1`

wtWebioEA12x12BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA12x12BinaryEntry entry .1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.1`
wtWebioEA12x12BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.2`
wtWebioEA12x12BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.3`
wtWebioEA12x12BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.4`
wtWebioEA12x12BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.5`
wtWebioEA12x12BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.6`
wtWebioEA12x12BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.7`
wtWebioEA12x12BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.8`
wtWebioEA12x12BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.9`
wtWebioEA12x12BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.10`
wtWebioEA12x12BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.11`
wtWebioEA12x12BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.12`
wtWebioEA12x12BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.13`
wtWebioEA12x12BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.14`
wtWebioEA12x12BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.15`
wtWebioEA12x12BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.16`
wtWebioEA12x12BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.17`
wtWebioEA12x12BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.18`
wtWebioEA12x12BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.19`
wtWebioEA12x12BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Constraints: `range: 1-65535` Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.20`
wtWebioEA12x12BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.21`
wtWebioEA12x12BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.3.6.3.1.22`

wtWebioEA12x12OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA12x12OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.4.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2:…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.4.1.1.1`

wtWebioEA12x12AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA12x12AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.4.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.2.1.1`

wtWebioEA12x12AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA12x12AlarmEntry entry .1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.1`
wtWebioEA12x12AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.2`
wtWebioEA12x12AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.3`
wtWebioEA12x12AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA12x12AlarmInputTrigger are not c…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.4`
wtWebioEA12x12AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.5`
wtWebioEA12x12AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.6`
wtWebioEA12x12AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.7`
wtWebioEA12x12AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.8`
wtWebioEA12x12AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.9`
wtWebioEA12x12AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.10`
wtWebioEA12x12AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.11`
wtWebioEA12x12AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.12`
wtWebioEA12x12AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.13`
wtWebioEA12x12AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.14`
wtWebioEA12x12AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.15`
wtWebioEA12x12AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.16`
wtWebioEA12x12AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.17`
wtWebioEA12x12AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.18`
wtWebioEA12x12AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.19`
wtWebioEA12x12AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.20`
wtWebioEA12x12AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.21`
wtWebioEA12x12AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.22`
wtWebioEA12x12AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.23`
wtWebioEA12x12AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.24`
wtWebioEA12x12AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.25`
wtWebioEA12x12AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.26`
wtWebioEA12x12AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.27`
wtWebioEA12x12AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.28`
wtWebioEA12x12AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.29`
wtWebioEA12x12AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.30`
wtWebioEA12x12AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.31`
wtWebioEA12x12AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.1.5.3.1.32`

wtWebioEA12x12InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA12x12InputPortEntry entry .1.3.6.1.4.1.5040.1.2.4.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.1`
wtWebioEA12x12PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.2`
wtWebioEA12x12PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.3`
wtWebioEA12x12PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.4`
wtWebioEA12x12PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.5`
wtWebioEA12x12PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.3.2.1.1.6`

wtWebioEA12x12OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.4.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA12x12OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.4.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x12PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.1`
wtWebioEA12x12PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.2`
wtWebioEA12x12PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.3`
wtWebioEA12x12PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.4`
wtWebioEA12x12PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.5`
wtWebioEA12x12PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: Bit 0-3 : inputs 8-11 Bit 4-7 : unused OCTET 4: Bit 0-7 : inputs 0-7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.6`
wtWebioEA12x12PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.7`
wtWebioEA12x12PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.8`
wtWebioEA12x12PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.9`
wtWebioEA12x12PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA12x12PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OC…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.4.3.2.2.1.10`

wtWebioEA2x2InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA2x2InputEntry entry .1.3.6.1.4.1.5040.1.2.13.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.13.1.3.1.1`
wtWebioEA2x2InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.13.1.3.1.2`
wtWebioEA2x2InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.1.3.1.3`
wtWebioEA2x2InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.1.3.1.4`

wtWebioEA2x2OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA2x2OutputEntry entry .1.3.6.1.4.1.5040.1.2.13.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2OutputNo mandatory Output number.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.1.5.1.1`
wtWebioEA2x2OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.1.5.1.2`

wtWebioEA2x2BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA2x2BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.13.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2BinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.2.1.1`

wtWebioEA2x2BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA2x2BinaryEntry entry .1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.1`
wtWebioEA2x2BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.2`
wtWebioEA2x2BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.3`
wtWebioEA2x2BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.4`
wtWebioEA2x2BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.5`
wtWebioEA2x2BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.6`
wtWebioEA2x2BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.7`
wtWebioEA2x2BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.8`
wtWebioEA2x2BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.9`
wtWebioEA2x2BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.10`
wtWebioEA2x2BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.11`
wtWebioEA2x2BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.12`
wtWebioEA2x2BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.13`
wtWebioEA2x2BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.14`
wtWebioEA2x2BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.15`
wtWebioEA2x2BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.16`
wtWebioEA2x2BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.17`
wtWebioEA2x2BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.18`
wtWebioEA2x2BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.19`
wtWebioEA2x2BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Constraints: `range: 12-12` Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.20`
wtWebioEA2x2BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.21`
wtWebioEA2x2BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.3.6.3.1.22`

wtWebioEA2x2OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA2x2OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.13.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.4.1.1.1`

wtWebioEA2x2AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA2x2AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.13.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.2.1.1`

wtWebioEA2x2AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA2x2AlarmEntry entry .1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.1`
wtWebioEA2x2AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.2`
wtWebioEA2x2AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.3`
wtWebioEA2x2AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA2x2AlarmInputTrigger are not con…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.4`
wtWebioEA2x2AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.5`
wtWebioEA2x2AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.6`
wtWebioEA2x2AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.7`
wtWebioEA2x2AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.8`
wtWebioEA2x2AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.9`
wtWebioEA2x2AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.10`
wtWebioEA2x2AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.11`
wtWebioEA2x2AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.12`
wtWebioEA2x2AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.13`
wtWebioEA2x2AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.14`
wtWebioEA2x2AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.15`
wtWebioEA2x2AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.16`
wtWebioEA2x2AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.17`
wtWebioEA2x2AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.18`
wtWebioEA2x2AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.19`
wtWebioEA2x2AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.20`
wtWebioEA2x2AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.21`
wtWebioEA2x2AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.22`
wtWebioEA2x2AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.23`
wtWebioEA2x2AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.24`
wtWebioEA2x2AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.25`
wtWebioEA2x2AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.26`
wtWebioEA2x2AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.27`
wtWebioEA2x2AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.28`
wtWebioEA2x2AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.29`
wtWebioEA2x2AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.30`
wtWebioEA2x2AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.31`
wtWebioEA2x2AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.1.5.3.1.32`

wtWebioEA2x2InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA2x2InputPortEntry entry .1.3.6.1.4.1.5040.1.2.13.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.1`
wtWebioEA2x2PortInputText mandatory Description of the input.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.2`
wtWebioEA2x2PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.3`
wtWebioEA2x2PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.4`
wtWebioEA2x2PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.5`
wtWebioEA2x2PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.6`

wtWebioEA2x2OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.13.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA2x2OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.13.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.1`
wtWebioEA2x2PortOutputText mandatory Description of the output.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.2`
wtWebioEA2x2PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.3`
wtWebioEA2x2PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.4`
wtWebioEA2x2PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.5`
wtWebioEA2x2PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.6`
wtWebioEA2x2PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.7`
wtWebioEA2x2PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.8`
wtWebioEA2x2PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.9`
wtWebioEA2x2PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA2x2PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OCTE…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.13.3.2.2.1.10`

wtWebioEA24oemInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA24oemInputEntry entry .1.3.6.1.4.1.5040.1.2.14.1.3.1

Numbers of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.14.1.3.1.1`
wtWebioEA24oemInputCounter mandatory Value of the input counter.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.1.3.1.2`
wtWebioEA24oemInputCounterClear mandatory Value of the input counter. After reading this counter will be cleared.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.1.3.1.3`
wtWebioEA24oemInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Constraints: `range: 1-12` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.1.3.1.4`

wtWebioEA24oemOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA24oemOutputEntry entry .1.3.6.1.4.1.5040.1.2.14.1.5.1

Numbers of the outputs.

Indexes

wtWebAlarm6x6AlarmNo

Column	Syntax	OID
wtWebioEA24oemOutputNo mandatory Index numbers of the outputs.	Integer32 Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.14.1.5.1.1`
wtWebioEA24oemOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.1.5.1.2`

wtWebioEA24oemBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA24oemBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.14.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.2.1.1`

wtWebioEA24oemBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA24oemBinaryEntry entry .1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.1`
wtWebioEA24oemBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.2`
wtWebioEA24oemBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.3`
wtWebioEA24oemBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.4`
wtWebioEA24oemBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.5`
wtWebioEA24oemBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.6`
wtWebioEA24oemBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.7`
wtWebioEA24oemBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.8`
wtWebioEA24oemBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.9`
wtWebioEA24oemBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.10`
wtWebioEA24oemBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.11`
wtWebioEA24oemBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.12`
wtWebioEA24oemBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.13`
wtWebioEA24oemBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.14`
wtWebioEA24oemBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.15`
wtWebioEA24oemBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.16`
wtWebioEA24oemBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.17`
wtWebioEA24oemBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.18`
wtWebioEA24oemBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.19`
wtWebioEA24oemBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.20`
wtWebioEA24oemBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.21`
wtWebioEA24oemBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.3.6.3.1.22`

wtWebioEA24oemOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA24oemOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.14.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.4.1.1.1`

wtWebioEA24oemAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA24oemAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.14.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.2.1.1`

wtWebioEA24oemAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.1.5.3 · 1 row entry · 25 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA24oemAlarmEntry entry .1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.1`
wtWebioEA24oemAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.2`
wtWebioEA24oemAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.3`
wtWebioEA24oemAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA24oemAlarmInputTrigger are not c…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.4`
wtWebioEA24oemAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.5`
wtWebioEA24oemAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4-7: unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.6`
wtWebioEA24oemAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.7`
wtWebioEA24oemAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.8`
wtWebioEA24oemAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.9`
wtWebioEA24oemAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.10`
wtWebioEA24oemAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.11`
wtWebioEA24oemAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.12`
wtWebioEA24oemAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.13`
wtWebioEA24oemAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.14`
wtWebioEA24oemAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.15`
wtWebioEA24oemAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.16`
wtWebioEA24oemAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.17`
wtWebioEA24oemAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.18`
wtWebioEA24oemAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.19`
wtWebioEA24oemAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.20`
wtWebioEA24oemAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.21`
wtWebioEA24oemAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.22`
wtWebioEA24oemAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.23`
wtWebioEA24oemAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.24`
wtWebioEA24oemAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.1.5.3.1.25`

wtWebioEA24oemInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.2.1 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA24oemInputPortEntry entry .1.3.6.1.4.1.5040.1.2.14.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemPortInputName mandatory Name of the input.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.14.3.2.1.1.1`
wtWebioEA24oemPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.1.1.2`
wtWebioEA24oemPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.1.1.3`
wtWebioEA24oemPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.3.2.1.1.4`

wtWebioEA24oemOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.14.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA24oemOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.14.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA24oemPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.1`
wtWebioEA24oemPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.2`
wtWebioEA24oemPortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.3`
wtWebioEA24oemPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.4`
wtWebioEA24oemPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (wt…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.5`
wtWebioEA24oemPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: Bit 0-7 : inputs 16 - 23 OCTET 3: Bit 0-7 : inputs 8 - 15 OCTET 4: Bit 0-7 : inputs 0 - 7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.6`
wtWebioEA24oemPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.7`
wtWebioEA24oemPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.8`
wtWebioEA24oemPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.9`
wtWebioEA24oemPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA24oemPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OC…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.14.3.2.2.1.10`

wtWebioEA12x6RelInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.1.3 · 1 row entry · 3 columns

Open in standard view

List of input indices.

wtWebioEA12x6RelInputEntry entry .1.3.6.1.4.1.5040.1.2.19.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.19.1.3.1.1`
wtWebioEA12x6RelInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.19.1.3.1.2`
wtWebioEA12x6RelInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.1.3.1.3`

wtWebioEA12x6RelOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA12x6RelOutputEntry entry .1.3.6.1.4.1.5040.1.2.19.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelOutputNo mandatory Output number.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.1.5.1.1`
wtWebioEA12x6RelOutputState mandatory Setting and reading of the states of the outputs, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.1.5.1.2`

wtWebioEA12x6RelBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA12x6RelBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.19.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.2.1.1`

wtWebioEA12x6RelBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA12x6RelBinaryEntry entry .1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.1`
wtWebioEA12x6RelBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.2`
wtWebioEA12x6RelBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.3`
wtWebioEA12x6RelBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.4`
wtWebioEA12x6RelBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.5`
wtWebioEA12x6RelBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.6`
wtWebioEA12x6RelBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.7`
wtWebioEA12x6RelBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.8`
wtWebioEA12x6RelBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.9`
wtWebioEA12x6RelBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.10`
wtWebioEA12x6RelBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.11`
wtWebioEA12x6RelBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.12`
wtWebioEA12x6RelBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.13`
wtWebioEA12x6RelBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.14`
wtWebioEA12x6RelBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.15`
wtWebioEA12x6RelBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.16`
wtWebioEA12x6RelBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.17`
wtWebioEA12x6RelBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.18`
wtWebioEA12x6RelBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32 Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.19`
wtWebioEA12x6RelBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.20`
wtWebioEA12x6RelBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.21`
wtWebioEA12x6RelBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.3.6.3.1.22`

wtWebioEA12x6RelOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA12x6RelOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.19.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each set of octets corresponding to an output. Bi…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.4.1.1.1`

wtWebioEA12x6RelAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA12x6RelAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.19.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.2.1.1`

wtWebioEA12x6RelAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA12x6RelAlarmEntry entry .1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.1`
wtWebioEA12x6RelAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.2`
wtWebioEA12x6RelAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.3`
wtWebioEA12x6RelAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA12x6RelAlarmInputTrigger are not…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.4`
wtWebioEA12x6RelAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.5`
wtWebioEA12x6RelAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.6`
wtWebioEA12x6RelAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.7`
wtWebioEA12x6RelAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.8`
wtWebioEA12x6RelAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.9`
wtWebioEA12x6RelAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.10`
wtWebioEA12x6RelAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.11`
wtWebioEA12x6RelAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.12`
wtWebioEA12x6RelAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.13`
wtWebioEA12x6RelAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.14`
wtWebioEA12x6RelAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.15`
wtWebioEA12x6RelAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.16`
wtWebioEA12x6RelAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.17`
wtWebioEA12x6RelAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.18`
wtWebioEA12x6RelAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.19`
wtWebioEA12x6RelAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.20`
wtWebioEA12x6RelAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.21`
wtWebioEA12x6RelAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.22`
wtWebioEA12x6RelAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.23`
wtWebioEA12x6RelAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.24`
wtWebioEA12x6RelAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.25`
wtWebioEA12x6RelAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.26`
wtWebioEA12x6RelAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.27`
wtWebioEA12x6RelAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.28`
wtWebioEA12x6RelAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.29`
wtWebioEA12x6RelAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.30`
wtWebioEA12x6RelAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.31`
wtWebioEA12x6RelAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.1.5.3.1.32`

wtWebioEA12x6RelInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA12x6RelInputPortEntry entry .1.3.6.1.4.1.5040.1.2.19.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.1`
wtWebioEA12x6RelPortInputText mandatory Description of the input.	OctetStringr/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.2`
wtWebioEA12x6RelPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.3`
wtWebioEA12x6RelPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.4`
wtWebioEA12x6RelPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.5`
wtWebioEA12x6RelPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Constraints: `range: 12-12` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.3.2.1.1.6`

wtWebioEA12x6RelOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.19.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA12x6RelOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.19.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.1`
wtWebioEA12x6RelPortOutputText mandatory Description of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.2`
wtWebioEA12x6RelPortOutputGroupMode mandatory Unused in this device 57634	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.3`
wtWebioEA12x6RelPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.4`
wtWebioEA12x6RelPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.5`
wtWebioEA12x6RelPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: Bit 0-3 : inputs 8-11 Bit 4-7 : unused OCTET 4: Bit 0-7 : inputs 0-7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.6`
wtWebioEA12x6RelPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.7`
wtWebioEA12x6RelPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.8`
wtWebioEA12x6RelPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.9`
wtWebioEA12x6RelPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA12x6RelPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.19.3.2.2.1.10`

wtWebAlarm6x6InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebAlarm6x6InputEntry entry .1.3.6.1.4.1.5040.1.2.20.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.20.1.3.1.1`
wtWebAlarm6x6InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.20.1.3.1.2`
wtWebAlarm6x6InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.1.3.1.3`
wtWebAlarm6x6InputState mandatory States of the inputs, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.1.3.1.4`

wtWebAlarm6x6OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebAlarm6x6OutputEntry entry .1.3.6.1.4.1.5040.1.2.20.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.20.1.5.1.1`
wtWebAlarm6x6OutputState mandatory States of the outputs, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.1.5.1.2`

wtWebAlarm6x6AlarmOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.1.8 · 1 row entry · 2 columns

Open in standard view

List of alarm indices..

wtWebAlarm6x6AlarmOutputEntry entry .1.3.6.1.4.1.5040.1.2.20.1.8.1

Index reference.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6AlarmOutputState mandatory State of the alarm, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.1.8.1.1`
wtWebAlarm6x6AlarmTriggerState mandatory State of the trigger condition, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.1.8.1.2`

wtWebAlarm6x6AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebAlarm6x6AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.20.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.2.1.1`

wtWebAlarm6x6AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.3.1.5.3 · 1 row entry · 48 columns

Open in standard view

List of settings depending on the alarm number.

wtWebAlarm6x6AlarmEntry entry .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.1`
wtWebAlarm6x6AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebAlarm6x6AlarmInputTrigger are not co…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.4`
wtWebAlarm6x6AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.5`
wtWebAlarm6x6AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Output Switch Enable Bit 1: Mail Enable Bit 2: SNMP Trap enable Bit 3: UDP enable Bit 4: unused Bit 5: TCP Client ena…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.6`
wtWebAlarm6x6AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.7`
wtWebAlarm6x6AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.8`
wtWebAlarm6x6AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.9`
wtWebAlarm6x6AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.10`
wtWebAlarm6x6AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.11`
wtWebAlarm6x6AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.12`
wtWebAlarm6x6AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.13`
wtWebAlarm6x6AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.14`
wtWebAlarm6x6AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.15`
wtWebAlarm6x6AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.16`
wtWebAlarm6x6AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.17`
wtWebAlarm6x6AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.18`
wtWebAlarm6x6AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.19`
wtWebAlarm6x6AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.20`
wtWebAlarm6x6AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.21`
wtWebAlarm6x6AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.22`
wtWebAlarm6x6AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.23`
wtWebAlarm6x6AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.24`
wtWebAlarm6x6AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.26`
wtWebAlarm6x6AlarmMailReleaseText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.27`
wtWebAlarm6x6AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.28`
wtWebAlarm6x6AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.29`
wtWebAlarm6x6AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.30`
wtWebAlarm6x6AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.31`
wtWebAlarm6x6AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.32`
wtWebAlarm6x6AlarmName mandatory Name of the alarm.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.33`
wtWebAlarm6x6AlarmGlobalEnable mandatory Binary coded alarm activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.34`
wtWebAlarm6x6AlarmCounterClear mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Counter clear on Alarm acknowledge Bit 0…	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.35`
wtWebAlarm6x6AlarmAckEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Software acknowledge enable Bit 0 : Hard…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.36`
wtWebAlarm6x6AlarmAckPort mandatory Number of the input, which clears the alarm (1-6).	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.37`
wtWebAlarm6x6AlarmSetPort mandatory Number of the output, which will be set by this alarm (1-6). The configuration of pulse mode and polarity defined in the port output section is used.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.38`
wtWebAlarm6x6AlarmMailTrgClearSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.39`
wtWebAlarm6x6AlarmMailTrgClearText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.40`
wtWebAlarm6x6AlarmSnmpTrapTrgClearText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.41`
wtWebAlarm6x6AlarmUdpTrgClearText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.42`
wtWebAlarm6x6AlarmTcpTrgClearText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.43`
wtWebAlarm6x6AlarmSyslogTrgClearText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.44`
wtWebAlarm6x6AlarmFtpTrgClearText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.45`
wtWebAlarm6x6AlarmMailTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.46`
wtWebAlarm6x6AlarmSnmpTrapTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.47`
wtWebAlarm6x6AlarmUdpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.48`
wtWebAlarm6x6AlarmTcpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.49`
wtWebAlarm6x6AlarmSyslogTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.50`
wtWebAlarm6x6AlarmFtpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.51`

wtWebAlarm6x6InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.3.2.1 · 1 row entry · 5 columns

Open in standard view

List of settings depending on the input number.

wtWebAlarm6x6InputPortEntry entry .1.3.6.1.4.1.5040.1.2.20.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6PortInputName mandatory Name of the input.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.20.3.2.1.1.1`
wtWebAlarm6x6PortInputText mandatory Description of the input.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.2.1.1.2`
wtWebAlarm6x6PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.3.2.1.1.4`
wtWebAlarm6x6PortInputPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.2.1.1.5`
wtWebAlarm6x6PortInputCounterSet mandatory Writing to this variable presets the counter, while reading returns the actual value.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.3.2.1.1.7`

wtWebAlarm6x6OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.20.3.2.2 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the output number.

wtWebAlarm6x6OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.20.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebAlarm6x6PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.2.2.1.1`
wtWebAlarm6x6PortOutputText mandatory Description of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.20.3.2.2.1.2`
wtWebAlarm6x6PortPulseDuration mandatory Pulse length in 1/100 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.20.3.2.2.1.9`
wtWebAlarm6x6PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebAlarm6x6PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OCT…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.20.3.2.2.1.10`

wtWebCount6InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.22.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebCount6InputEntry entry .1.3.6.1.4.1.5040.1.2.22.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebCount6InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.22.1.3.1.1`
wtWebCount6InputCounter mandatory Value of the input counter.	Integer32 Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.22.1.3.1.2`
wtWebCount6InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Constraints: `range: 12-12` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.1.3.1.3`
wtWebCount6InputState mandatory Tates of the inputs, 0-OFF, 1-ON.	Integer32 Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.1.3.1.4`

wtWebCount6ReportOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.22.1.8 · 1 row entry · 2 columns

Open in standard view

List of Report indices..

wtWebCount6ReportOutputEntry entry .1.3.6.1.4.1.5040.1.2.22.1.8.1

Index reference.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebCount6ReportOutputState mandatory State of the Report, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.1.8.1.1`
wtWebCount6ReportTriggerState mandatory State of the trigger condition, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.1.8.1.2`

wtWebCount6ReportIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.22.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of Report indices.

wtWebCount6ReportIfEntry entry .1.3.6.1.4.1.5040.1.2.22.3.1.5.2.1

Numbers of the Reports.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebCount6ReportNo mandatory Numbers of the Reports.	Integer32	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.2.1.1`

wtWebCount6ReportTable

table mandatory

.1.3.6.1.4.1.5040.1.2.22.3.1.5.3 · 1 row entry · 30 columns

Open in standard view

List of settings depending on the Report number.

wtWebCount6ReportEntry entry .1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1

Report parameters of the individual Reports.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebCount6ReportInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.1`
wtWebCount6ReportSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 7 : Timer OFF Bit 6 : Time Window …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.3`
wtWebCount6ReportMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding Report is triggered. Input counters with its mask bit unset in wtWebCount6ReportInputTrigger are not co…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.4`
wtWebCount6ReportInterval mandatory Send interval for Report messages.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.5`
wtWebCount6ReportEnable mandatory Binary coded Report enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Output Switch Enable Bit 1: Mail Enable Bit 2: SNMP Trap enable Bit 3: UDP enable Bit 4: unused Bit 5: TCP Client en…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.6`
wtWebCount6ReportMailAddr mandatory E-Mail address for sending the Report mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.7`
wtWebCount6ReportMailSubject mandatory Subject line for Report mail.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.8`
wtWebCount6ReportMailText mandatory Report mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.9`
wtWebCount6ReportSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.10`
wtWebCount6ReportSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.11`
wtWebCount6ReportUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.12`
wtWebCount6ReportUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.13`
wtWebCount6ReportUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.14`
wtWebCount6ReportTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.15`
wtWebCount6ReportTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.16`
wtWebCount6ReportTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.17`
wtWebCount6ReportSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.18`
wtWebCount6ReportSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.19`
wtWebCount6ReportSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.20`
wtWebCount6ReportFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.21`
wtWebCount6ReportFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.22`
wtWebCount6ReportFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.23`
wtWebCount6ReportFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.24`
wtWebCount6ReportTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a report, weekday and day of month are interpreted separatley. 1: Minutes Range…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.25`
wtWebCount6ReportName mandatory Name of the Report.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.33`
wtWebCount6ReportGlobalEnable mandatory Binary coded Report activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Report enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.34`
wtWebCount6ReportCounterClear mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Counter clear on Report send	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.35`
wtWebCount6ReportRateOfChange mandatory This variable configures a max. counter value within a time slot. If an input counter value exceeds this max. value, the corresponding Report is triggered. Input counters with its mask bit unset in wtWebCount6ReportInpu…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.52`
wtWebCount6ReportRateOfChangeWindow mandatory This variable configures the time slot of wtWebCount6ReportRateOfChange. Input counters with its mask bit unset in wtWebCount6ReportInputTrigger are not considered. A value of Zero disable the tracing of rate of change.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.53`
wtWebCount6ReportRateOfChangeMode mandatory Binary coded options: Minimum mode: a report will be send if the count of pulses is lower than the given pulse count in wtWebCount6ReportRateOfChange. Maximum mode: a report will be send if the count of pulses is greate…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.1.5.3.1.54`

wtWebCount6InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.22.3.2.1 · 1 row entry · 9 columns

Open in standard view

List of settings depending on the input number.

wtWebCount6InputPortEntry entry .1.3.6.1.4.1.5040.1.2.22.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebCount6PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.1`
wtWebCount6PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.2`
wtWebCount6PortInputMode mandatory Binary coded modes: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. Selection for input 0-1: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Bidirectional counter…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.3`
wtWebCount6PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.4`
wtWebCount6PortInputPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.5`
wtWebCount6PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.6`
wtWebCount6PortInputCounterSet mandatory Writing to this variable presets the counter, while reading returns the actual value.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.7`
wtWebCount6PortInputCounterScale mandatory Conversion factor for this counter.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.8`
wtWebCount6PortInputCounterUnit mandatory Unit for this counter.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.22.3.2.1.1.9`

wtWebioEA6x6InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA6x6InputEntry entry .1.3.6.1.4.1.5040.1.2.24.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6InputNo mandatory Index numbers of the inputs.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.24.1.3.1.1`
wtWebioEA6x6InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.24.1.3.1.2`
wtWebioEA6x6InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.1.3.1.3`
wtWebioEA6x6InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.1.3.1.4`

wtWebioEA6x6OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA6x6OutputEntry entry .1.3.6.1.4.1.5040.1.2.24.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.24.1.5.1.1`
wtWebioEA6x6OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.1.5.1.2`

wtWebioEA6x6BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA6x6BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.24.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6BinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.2.1.1`

wtWebioEA6x6BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA6x6BinaryEntry entry .1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.1`
wtWebioEA6x6BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.2`
wtWebioEA6x6BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.3`
wtWebioEA6x6BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.4`
wtWebioEA6x6BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.5`
wtWebioEA6x6BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.6`
wtWebioEA6x6BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.7`
wtWebioEA6x6BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.8`
wtWebioEA6x6BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 0-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.9`
wtWebioEA6x6BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.10`
wtWebioEA6x6BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.11`
wtWebioEA6x6BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.12`
wtWebioEA6x6BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.13`
wtWebioEA6x6BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.14`
wtWebioEA6x6BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.15`
wtWebioEA6x6BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.16`
wtWebioEA6x6BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.17`
wtWebioEA6x6BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.18`
wtWebioEA6x6BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.19`
wtWebioEA6x6BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Constraints: `range: 1-65535` Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.20`
wtWebioEA6x6BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.21`
wtWebioEA6x6BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.22`

wtWebioEA6x6OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA6x6OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.24.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2:…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.4.1.1.1`

wtWebioEA6x6AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA6x6AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.24.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.2.1.1`

wtWebioEA6x6AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA6x6AlarmEntry entry .1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.1`
wtWebioEA6x6AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.2`
wtWebioEA6x6AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.3`
wtWebioEA6x6AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA6x6AlarmInputTrigger are not con…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.4`
wtWebioEA6x6AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.5`
wtWebioEA6x6AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.6`
wtWebioEA6x6AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.7`
wtWebioEA6x6AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.8`
wtWebioEA6x6AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.9`
wtWebioEA6x6AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.10`
wtWebioEA6x6AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.11`
wtWebioEA6x6AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.12`
wtWebioEA6x6AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.13`
wtWebioEA6x6AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.14`
wtWebioEA6x6AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.15`
wtWebioEA6x6AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.16`
wtWebioEA6x6AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.17`
wtWebioEA6x6AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.18`
wtWebioEA6x6AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.19`
wtWebioEA6x6AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.20`
wtWebioEA6x6AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.21`
wtWebioEA6x6AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.22`
wtWebioEA6x6AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.23`
wtWebioEA6x6AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.24`
wtWebioEA6x6AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.25`
wtWebioEA6x6AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.26`
wtWebioEA6x6AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.27`
wtWebioEA6x6AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.28`
wtWebioEA6x6AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.29`
wtWebioEA6x6AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.30`
wtWebioEA6x6AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.31`
wtWebioEA6x6AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.1.5.3.1.32`

wtWebioEA6x6InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA6x6InputPortEntry entry .1.3.6.1.4.1.5040.1.2.24.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6PortInputName mandatory Name of the input.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.1`
wtWebioEA6x6PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.2`
wtWebioEA6x6PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.3`
wtWebioEA6x6PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.4`
wtWebioEA6x6PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.5`
wtWebioEA6x6PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.3.2.1.1.6`

wtWebioEA6x6OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.24.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA6x6OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.24.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA6x6PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.1`
wtWebioEA6x6PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.2`
wtWebioEA6x6PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.3`
wtWebioEA6x6PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.4`
wtWebioEA6x6PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.5`
wtWebioEA6x6PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-5 : inputs 0-5 Bit 6-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.6`
wtWebioEA6x6PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.7`
wtWebioEA6x6PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.8`
wtWebioEA6x6PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.9`
wtWebioEA6x6PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA6x6PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OCTE…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.24.3.2.2.1.10`

wtWebioEA2x2ERPInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA2x2ERPInputEntry entry .1.3.6.1.4.1.5040.1.2.25.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.1.3.1.1`
wtWebioEA2x2ERPInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.1.3.1.2`
wtWebioEA2x2ERPInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.1.3.1.3`
wtWebioEA2x2ERPInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.1.3.1.4`

wtWebioEA2x2ERPOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA2x2ERPOutputEntry entry .1.3.6.1.4.1.5040.1.2.25.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPOutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.1.5.1.1`
wtWebioEA2x2ERPOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.1.5.1.2`

wtWebioEA2x2ERPBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA2x2ERPBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.25.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.2.1.1`

wtWebioEA2x2ERPBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA2x2ERPBinaryEntry entry .1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.1`
wtWebioEA2x2ERPBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.2`
wtWebioEA2x2ERPBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.3`
wtWebioEA2x2ERPBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.4`
wtWebioEA2x2ERPBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.5`
wtWebioEA2x2ERPBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.6`
wtWebioEA2x2ERPBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.7`
wtWebioEA2x2ERPBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.8`
wtWebioEA2x2ERPBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.9`
wtWebioEA2x2ERPBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-4`	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.10`
wtWebioEA2x2ERPBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.11`
wtWebioEA2x2ERPBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.12`
wtWebioEA2x2ERPBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.13`
wtWebioEA2x2ERPBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.14`
wtWebioEA2x2ERPBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.15`
wtWebioEA2x2ERPBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.16`
wtWebioEA2x2ERPBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.17`
wtWebioEA2x2ERPBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.18`
wtWebioEA2x2ERPBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.19`
wtWebioEA2x2ERPBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.20`
wtWebioEA2x2ERPBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.21`
wtWebioEA2x2ERPBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.3.6.3.1.22`

wtWebioEA2x2ERPOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA2x2ERPOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.25.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.4.1.1.1`

wtWebioEA2x2ERPAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA2x2ERPAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.25.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.2.1.1`

wtWebioEA2x2ERPAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA2x2ERPAlarmEntry entry .1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.1`
wtWebioEA2x2ERPAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.2`
wtWebioEA2x2ERPAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.3`
wtWebioEA2x2ERPAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA2x2ERPAlarmInputTrigger are not …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.4`
wtWebioEA2x2ERPAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.5`
wtWebioEA2x2ERPAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.6`
wtWebioEA2x2ERPAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.7`
wtWebioEA2x2ERPAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.8`
wtWebioEA2x2ERPAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.9`
wtWebioEA2x2ERPAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.10`
wtWebioEA2x2ERPAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.11`
wtWebioEA2x2ERPAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.12`
wtWebioEA2x2ERPAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.13`
wtWebioEA2x2ERPAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.14`
wtWebioEA2x2ERPAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.15`
wtWebioEA2x2ERPAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.16`
wtWebioEA2x2ERPAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.17`
wtWebioEA2x2ERPAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.18`
wtWebioEA2x2ERPAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.19`
wtWebioEA2x2ERPAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.20`
wtWebioEA2x2ERPAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.21`
wtWebioEA2x2ERPAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.22`
wtWebioEA2x2ERPAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.23`
wtWebioEA2x2ERPAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.24`
wtWebioEA2x2ERPAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.25`
wtWebioEA2x2ERPAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.26`
wtWebioEA2x2ERPAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.27`
wtWebioEA2x2ERPAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.28`
wtWebioEA2x2ERPAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.29`
wtWebioEA2x2ERPAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.30`
wtWebioEA2x2ERPAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.31`
wtWebioEA2x2ERPAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.1.5.3.1.32`

wtWebioEA2x2ERPInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA2x2ERPInputPortEntry entry .1.3.6.1.4.1.5040.1.2.25.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.1`
wtWebioEA2x2ERPPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.2`
wtWebioEA2x2ERPPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.3`
wtWebioEA2x2ERPPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.4`
wtWebioEA2x2ERPPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.5`
wtWebioEA2x2ERPPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.3.2.1.1.6`

wtWebioEA2x2ERPOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.25.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA2x2ERPOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.25.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERPPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.1`
wtWebioEA2x2ERPPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.2`
wtWebioEA2x2ERPPortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.3`
wtWebioEA2x2ERPPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.4`
wtWebioEA2x2ERPPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.5`
wtWebioEA2x2ERPPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.6`
wtWebioEA2x2ERPPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.7`
wtWebioEA2x2ERPPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.8`
wtWebioEA2x2ERPPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Constraints: `range: 1-1` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.9`
wtWebioEA2x2ERPPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA2x2ERPPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused O…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.25.3.2.2.1.10`

wtWebioEA12x6RelERPInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.1.3 · 1 row entry · 3 columns

Open in standard view

List of input indices.

wtWebioEA12x6RelERPInputEntry entry .1.3.6.1.4.1.5040.1.2.26.1.3.1

Number of the inputs.

Indexes

wtWebioEA2x2-24VBinaryModeNo

Column	Syntax	OID
wtWebioEA12x6RelERPInputNo mandatory Index numbers of the inputs.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.26.1.3.1.1`
wtWebioEA12x6RelERPInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.26.1.3.1.2`
wtWebioEA12x6RelERPInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.1.3.1.3`

wtWebioEA12x6RelERPOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA12x6RelERPOutputEntry entry .1.3.6.1.4.1.5040.1.2.26.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPOutputNo mandatory Output number.	Integer32 Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.1.5.1.1`
wtWebioEA12x6RelERPOutputState mandatory Setting and reading of the states of the outputs, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.1.5.1.2`

wtWebioEA12x6RelERPBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA12x6RelERPBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.26.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.2.1.1`

wtWebioEA12x6RelERPBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA12x6RelERPBinaryEntry entry .1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.1`
wtWebioEA12x6RelERPBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.2`
wtWebioEA12x6RelERPBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.3`
wtWebioEA12x6RelERPBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.4`
wtWebioEA12x6RelERPBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.5`
wtWebioEA12x6RelERPBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.6`
wtWebioEA12x6RelERPBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.7`
wtWebioEA12x6RelERPBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.8`
wtWebioEA12x6RelERPBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.9`
wtWebioEA12x6RelERPBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.10`
wtWebioEA12x6RelERPBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.11`
wtWebioEA12x6RelERPBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.12`
wtWebioEA12x6RelERPBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.13`
wtWebioEA12x6RelERPBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.14`
wtWebioEA12x6RelERPBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.15`
wtWebioEA12x6RelERPBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.16`
wtWebioEA12x6RelERPBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.17`
wtWebioEA12x6RelERPBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.18`
wtWebioEA12x6RelERPBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.19`
wtWebioEA12x6RelERPBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.20`
wtWebioEA12x6RelERPBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.21`
wtWebioEA12x6RelERPBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.26.3.1.3.6.3.1.22`

wtWebioEA12x6RelERPOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA12x6RelERPOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.26.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each set of octets corresponding to an output. Bi…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.4.1.1.1`

wtWebioEA12x6RelERPAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA12x6RelERPAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.26.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.2.1.1`

wtWebioEA12x6RelERPAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA12x6RelERPAlarmEntry entry .1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.1`
wtWebioEA12x6RelERPAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.2`
wtWebioEA12x6RelERPAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.3`
wtWebioEA12x6RelERPAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA12x6RelERPAlarmInputTrigger are …	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.4`
wtWebioEA12x6RelERPAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.5`
wtWebioEA12x6RelERPAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.6`
wtWebioEA12x6RelERPAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.7`
wtWebioEA12x6RelERPAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.8`
wtWebioEA12x6RelERPAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.9`
wtWebioEA12x6RelERPAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.10`
wtWebioEA12x6RelERPAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.11`
wtWebioEA12x6RelERPAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.12`
wtWebioEA12x6RelERPAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.13`
wtWebioEA12x6RelERPAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.14`
wtWebioEA12x6RelERPAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.15`
wtWebioEA12x6RelERPAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.16`
wtWebioEA12x6RelERPAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.17`
wtWebioEA12x6RelERPAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.18`
wtWebioEA12x6RelERPAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.19`
wtWebioEA12x6RelERPAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.20`
wtWebioEA12x6RelERPAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.21`
wtWebioEA12x6RelERPAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.22`
wtWebioEA12x6RelERPAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.23`
wtWebioEA12x6RelERPAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.24`
wtWebioEA12x6RelERPAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.25`
wtWebioEA12x6RelERPAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.26`
wtWebioEA12x6RelERPAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.27`
wtWebioEA12x6RelERPAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.28`
wtWebioEA12x6RelERPAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.29`
wtWebioEA12x6RelERPAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.30`
wtWebioEA12x6RelERPAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.31`
wtWebioEA12x6RelERPAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.1.5.3.1.32`

wtWebioEA12x6RelERPInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA12x6RelERPInputPortEntry entry .1.3.6.1.4.1.5040.1.2.26.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.1`
wtWebioEA12x6RelERPPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.2`
wtWebioEA12x6RelERPPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.3`
wtWebioEA12x6RelERPPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.4`
wtWebioEA12x6RelERPPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.5`
wtWebioEA12x6RelERPPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.3.2.1.1.6`

wtWebioEA12x6RelERPOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.26.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA12x6RelERPOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.26.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA12x6RelERPPortOutputName mandatory Name of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.1`
wtWebioEA12x6RelERPPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.2`
wtWebioEA12x6RelERPPortOutputGroupMode mandatory Unused in this device 57634	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.3`
wtWebioEA12x6RelERPPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.4`
wtWebioEA12x6RelERPPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.5`
wtWebioEA12x6RelERPPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: Bit 0-3 : inputs 8-11 Bit 4-7 : unused OCTET 4: Bit 0-7 : inputs 0-7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.6`
wtWebioEA12x6RelERPPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.7`
wtWebioEA12x6RelERPPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.8`
wtWebioEA12x6RelERPPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.9`
wtWebioEA12x6RelERPPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA12x6RelERPPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unus…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.26.3.2.2.1.10`

wtIpWatcherInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtIpWatcherInputEntry entry .1.3.6.1.4.1.5040.1.2.27.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.27.1.3.1.1`
wtIpWatcherInputCounter mandatory Value of the input counter.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.27.1.3.1.2`
wtIpWatcherInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.1.3.1.3`
wtIpWatcherInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.1.3.1.4`

wtIpWatcherOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtIpWatcherOutputEntry entry .1.3.6.1.4.1.5040.1.2.27.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherOutputNo mandatory Output number.	Integer32 Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.1.5.1.1`
wtIpWatcherOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.1.5.1.2`

wtIpWatcherAlarmOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.1.8 · 1 row entry · 2 columns

Open in standard view

List of alarm indices..

wtIpWatcherAlarmOutputEntry entry .1.3.6.1.4.1.5040.1.2.27.1.8.1

Index reference.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherAlarmOutputState mandatory State of the alarm, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.1.8.1.1`
wtIpWatcherAlarmTriggerState mandatory State of the trigger condition, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.1.8.1.2`

wtIpWatcherIpListIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.2 · 1 row entry · 1 columns

Open in standard view

Table of inices.

wtIpWatcherIpListIfEntry entry .1.3.6.1.4.1.5040.1.2.27.3.1.3.11.2.1

Table entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherIpListNo mandatory List number of this entry.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.2.1.1`

wtIpWatcherIpListTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3 · 1 row entry · 5 columns

Open in standard view

List of ip addresses.

wtIpWatcherIpListEntry entry .1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1

List entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherIpListName mandatory Name or IP address.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1.1`
wtIpWatcherIpListPort mandatory Port number, zero in the case of broadcast or Ping.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1.2`
wtIpWatcherIpListService mandatory Binary coded scan mode, only one mode can be selected at a particular time: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Ping enable Bit 1-7: unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1.3`
wtIpWatcherIpListEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: enabled in Alarm 1 Bit 1: enabled in Alarm 2 Bit 2: enabled in Alarm 3 Bit 3: enabled in Alarm 4 Bit 4-7: unused	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1.4`
wtIpWatcherIpListAlias mandatory Alias Name	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.3.11.3.1.5`

wtIpWatcherAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtIpWatcherAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.27.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherAlarmNo mandatory Numbers of the alarms.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.2.1.1`

wtIpWatcherAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.1.5.3 · 1 row entry · 49 columns

Open in standard view

List of settings depending on the alarm number.

wtIpWatcherAlarmEntry entry .1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.5`
wtIpWatcherAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.6`
wtIpWatcherAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.7`
wtIpWatcherAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.8`
wtIpWatcherAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 1-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.9`
wtIpWatcherAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.10`
wtIpWatcherAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.11`
wtIpWatcherAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.12`
wtIpWatcherAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.13`
wtIpWatcherAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.14`
wtIpWatcherAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.15`
wtIpWatcherAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.16`
wtIpWatcherAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.17`
wtIpWatcherAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.18`
wtIpWatcherAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.19`
wtIpWatcherAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.20`
wtIpWatcherAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.21`
wtIpWatcherAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.22`
wtIpWatcherAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.23`
wtIpWatcherAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.24`
wtIpWatcherAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.25`
wtIpWatcherAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.26`
wtIpWatcherAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.27`
wtIpWatcherAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.28`
wtIpWatcherAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.29`
wtIpWatcherAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.30`
wtIpWatcherAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.31`
wtIpWatcherAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.32`
wtIpWatcherAlarmName mandatory Name of the alarm.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.33`
wtIpWatcherAlarmGlobalEnable mandatory Binary coded alarm activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.34`
wtIpWatcherAlarmCounterClear mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Counter clear on Alarm acknowledge Bit 0…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.35`
wtIpWatcherAlarmAckEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Software acknowledge enable Bit 0 : Hard…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.36`
wtIpWatcherAlarmAckPort mandatory Number of the input, which clears the alarm (1-6).	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.37`
wtIpWatcherAlarmSetPort mandatory Number of the output, which will be set by this alarm (1-6). The configuration of pulse mode and polarity defined in the port output section is used.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.38`
wtIpWatcherAlarmMailTrgClearSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.39`
wtIpWatcherAlarmMailTrgClearText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.40`
wtIpWatcherAlarmSnmpTrapTrgClearText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.41`
wtIpWatcherAlarmUdpTrgClearText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.42`
wtIpWatcherAlarmTcpTrgClearText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.43`
wtIpWatcherAlarmSyslogTrgClearText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.44`
wtIpWatcherAlarmFtpTrgClearText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.45`
wtIpWatcherAlarmMailTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.46`
wtIpWatcherAlarmSnmpTrapTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.47`
wtIpWatcherAlarmUdpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.48`
wtIpWatcherAlarmTcpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.49`
wtIpWatcherAlarmSyslogTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.50`
wtIpWatcherAlarmFtpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.51`
wtIpWatcherAlarmTriggerCount mandatory Alarm will be send if the trigger condition occours TriggerCount times.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.52`
wtIpWatcherAlarmPollingRate mandatory Time in seconds.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.53`

wtIpWatcherInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.2.1 · 1 row entry · 3 columns

Open in standard view

List of settings depending on the input number.

wtIpWatcherInputPortEntry entry .1.3.6.1.4.1.5040.1.2.27.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.2.1.1.1`
wtIpWatcherPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.2.1.1.2`
wtIpWatcherPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.2.1.1.4`

wtIpWatcherOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.27.3.2.2 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the output number.

wtIpWatcherOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.27.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcherPortOutputName mandatory Name of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.27.3.2.2.1.1`
wtIpWatcherPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.2.2.1.2`
wtIpWatcherPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.27.3.2.2.1.9`
wtIpWatcherPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtIpWatcherPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused OCTET…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.27.3.2.2.1.10`

wtWebioEA2x2-24VInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA2x2-24VInputEntry entry .1.3.6.1.4.1.5040.1.2.30.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VInputNo mandatory Index numbers of the inputs.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.30.1.3.1.1`
wtWebioEA2x2-24VInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.30.1.3.1.2`
wtWebioEA2x2-24VInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.1.3.1.3`
wtWebioEA2x2-24VInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.1.3.1.4`

wtWebioEA2x2-24VOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA2x2-24VOutputEntry entry .1.3.6.1.4.1.5040.1.2.30.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VOutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.30.1.5.1.1`
wtWebioEA2x2-24VOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.1.5.1.2`

wtWebioEA2x2-24VBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA2x2-24VBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.30.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.2.1.1`

wtWebioEA2x2-24VBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA2x2-24VBinaryEntry entry .1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1

Binary properties.

Indexes

wtIpWatcher-24VIpListNo

Column	Syntax	OID
wtWebioEA2x2-24VBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: `range: 1-999`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.1`
wtWebioEA2x2-24VBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.2`
wtWebioEA2x2-24VBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.3`
wtWebioEA2x2-24VBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.4`
wtWebioEA2x2-24VBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.5`
wtWebioEA2x2-24VBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.6`
wtWebioEA2x2-24VBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.7`
wtWebioEA2x2-24VBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.8`
wtWebioEA2x2-24VBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.9`
wtWebioEA2x2-24VBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.10`
wtWebioEA2x2-24VBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 1-4`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.11`
wtWebioEA2x2-24VBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.12`
wtWebioEA2x2-24VBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.13`
wtWebioEA2x2-24VBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.14`
wtWebioEA2x2-24VBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.15`
wtWebioEA2x2-24VBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.16`
wtWebioEA2x2-24VBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.17`
wtWebioEA2x2-24VBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.18`
wtWebioEA2x2-24VBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.19`
wtWebioEA2x2-24VBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.20`
wtWebioEA2x2-24VBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.21`
wtWebioEA2x2-24VBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.30.3.1.3.6.3.1.22`

wtWebioEA2x2-24VOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA2x2-24VOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.30.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.30.3.1.4.1.1.1`

wtWebioEA2x2-24VAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA2x2-24VAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.30.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VAlarmNo mandatory Numbers of the alarms.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.2.1.1`

wtWebioEA2x2-24VAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA2x2-24VAlarmEntry entry .1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.1`
wtWebioEA2x2-24VAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.2`
wtWebioEA2x2-24VAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.3`
wtWebioEA2x2-24VAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA2x2-24VAlarmInputTrigger are not…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.4`
wtWebioEA2x2-24VAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.5`
wtWebioEA2x2-24VAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.6`
wtWebioEA2x2-24VAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.7`
wtWebioEA2x2-24VAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.8`
wtWebioEA2x2-24VAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.9`
wtWebioEA2x2-24VAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.10`
wtWebioEA2x2-24VAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.11`
wtWebioEA2x2-24VAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.12`
wtWebioEA2x2-24VAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.13`
wtWebioEA2x2-24VAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.14`
wtWebioEA2x2-24VAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.15`
wtWebioEA2x2-24VAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.16`
wtWebioEA2x2-24VAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.17`
wtWebioEA2x2-24VAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.18`
wtWebioEA2x2-24VAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.19`
wtWebioEA2x2-24VAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.20`
wtWebioEA2x2-24VAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.21`
wtWebioEA2x2-24VAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.22`
wtWebioEA2x2-24VAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.23`
wtWebioEA2x2-24VAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.24`
wtWebioEA2x2-24VAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.25`
wtWebioEA2x2-24VAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.26`
wtWebioEA2x2-24VAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.27`
wtWebioEA2x2-24VAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.28`
wtWebioEA2x2-24VAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.29`
wtWebioEA2x2-24VAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.30`
wtWebioEA2x2-24VAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.31`
wtWebioEA2x2-24VAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.1.5.3.1.32`

wtWebioEA2x2-24VInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA2x2-24VInputPortEntry entry .1.3.6.1.4.1.5040.1.2.30.3.2.1.1

Input parameter for the individual inputs.

Indexes

wtIpWatcher-24VInputNo

Column	Syntax	OID
wtWebioEA2x2-24VPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.1`
wtWebioEA2x2-24VPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.2`
wtWebioEA2x2-24VPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.3`
wtWebioEA2x2-24VPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.4`
wtWebioEA2x2-24VPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.5`
wtWebioEA2x2-24VPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.3.2.1.1.6`

wtWebioEA2x2-24VOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.30.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA2x2-24VOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.30.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2-24VPortOutputName mandatory Name of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.1`
wtWebioEA2x2-24VPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.2`
wtWebioEA2x2-24VPortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.3`
wtWebioEA2x2-24VPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.4`
wtWebioEA2x2-24VPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.5`
wtWebioEA2x2-24VPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.6`
wtWebioEA2x2-24VPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.7`
wtWebioEA2x2-24VPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.8`
wtWebioEA2x2-24VPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.9`
wtWebioEA2x2-24VPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA2x2-24VPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.30.3.2.2.1.10`

wtWebioEA2x2ERP-24VInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebioEA2x2ERP-24VInputEntry entry .1.3.6.1.4.1.5040.1.2.31.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.31.1.3.1.1`
wtWebioEA2x2ERP-24VInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.31.1.3.1.2`
wtWebioEA2x2ERP-24VInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.1.3.1.3`
wtWebioEA2x2ERP-24VInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Constraints: `range: 1-2` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.1.3.1.4`

wtWebioEA2x2ERP-24VOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebioEA2x2ERP-24VOutputEntry entry .1.3.6.1.4.1.5040.1.2.31.1.5.1

Number of the outputs.

Indexes

wtTrapReceiver2x2ButtonNo

Column	Syntax	OID
wtWebioEA2x2ERP-24VOutputNo mandatory Output number.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.5040.1.2.31.1.5.1.1`
wtWebioEA2x2ERP-24VOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.1.5.1.2`

wtWebioEA2x2ERP-24VBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebioEA2x2ERP-24VBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VBinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.2.1.1`

wtWebioEA2x2ERP-24VBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3 · 1 row entry · 22 columns

Open in standard view

Table of properties of the binary mode.

wtWebioEA2x2ERP-24VBinaryEntry entry .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.1`
wtWebioEA2x2ERP-24VBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.2`
wtWebioEA2x2ERP-24VBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.3`
wtWebioEA2x2ERP-24VBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.4`
wtWebioEA2x2ERP-24VBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.5`
wtWebioEA2x2ERP-24VBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.6`
wtWebioEA2x2ERP-24VBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.7`
wtWebioEA2x2ERP-24VBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.8`
wtWebioEA2x2ERP-24VBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.9`
wtWebioEA2x2ERP-24VBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.10`
wtWebioEA2x2ERP-24VBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.11`
wtWebioEA2x2ERP-24VBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.12`
wtWebioEA2x2ERP-24VBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.13`
wtWebioEA2x2ERP-24VBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.14`
wtWebioEA2x2ERP-24VBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.15`
wtWebioEA2x2ERP-24VBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.16`
wtWebioEA2x2ERP-24VBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.17`
wtWebioEA2x2ERP-24VBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.18`
wtWebioEA2x2ERP-24VBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.19`
wtWebioEA2x2ERP-24VBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Constraints: `range: 4-4` Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.20`
wtWebioEA2x2ERP-24VBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.21`
wtWebioEA2x2ERP-24VBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.22`

wtWebioEA2x2ERP-24VOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebioEA2x2ERP-24VOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.31.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.31.3.1.4.1.1.1`

wtWebioEA2x2ERP-24VAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebioEA2x2ERP-24VAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.31.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.2.1.1`

wtWebioEA2x2ERP-24VAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.1.5.3 · 1 row entry · 32 columns

Open in standard view

List of settings depending on the alarm number.

wtWebioEA2x2ERP-24VAlarmEntry entry .1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.1`
wtWebioEA2x2ERP-24VAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.2`
wtWebioEA2x2ERP-24VAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.3`
wtWebioEA2x2ERP-24VAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebioEA2x2ERP-24VAlarmInputTrigger are …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.4`
wtWebioEA2x2ERP-24VAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.5`
wtWebioEA2x2ERP-24VAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.6`
wtWebioEA2x2ERP-24VAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.7`
wtWebioEA2x2ERP-24VAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.8`
wtWebioEA2x2ERP-24VAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.9`
wtWebioEA2x2ERP-24VAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.10`
wtWebioEA2x2ERP-24VAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.11`
wtWebioEA2x2ERP-24VAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.12`
wtWebioEA2x2ERP-24VAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.13`
wtWebioEA2x2ERP-24VAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.14`
wtWebioEA2x2ERP-24VAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.15`
wtWebioEA2x2ERP-24VAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.16`
wtWebioEA2x2ERP-24VAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.17`
wtWebioEA2x2ERP-24VAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.18`
wtWebioEA2x2ERP-24VAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.19`
wtWebioEA2x2ERP-24VAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.20`
wtWebioEA2x2ERP-24VAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.21`
wtWebioEA2x2ERP-24VAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.22`
wtWebioEA2x2ERP-24VAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.23`
wtWebioEA2x2ERP-24VAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.24`
wtWebioEA2x2ERP-24VAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.25`
wtWebioEA2x2ERP-24VAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.26`
wtWebioEA2x2ERP-24VAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.27`
wtWebioEA2x2ERP-24VAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.28`
wtWebioEA2x2ERP-24VAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.29`
wtWebioEA2x2ERP-24VAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.30`
wtWebioEA2x2ERP-24VAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.31`
wtWebioEA2x2ERP-24VAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.31.3.1.5.3.1.32`

wtWebioEA2x2ERP-24VInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebioEA2x2ERP-24VInputPortEntry entry .1.3.6.1.4.1.5040.1.2.31.3.2.1.1

Input parameter for the individual inputs.

Indexes

wtWebio577xxEA1x1InputNo

Column	Syntax	OID
wtWebioEA2x2ERP-24VPortInputName mandatory Name of the input.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.1`
wtWebioEA2x2ERP-24VPortInputText mandatory Description of the input.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.2`
wtWebioEA2x2ERP-24VPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.3`
wtWebioEA2x2ERP-24VPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.4`
wtWebioEA2x2ERP-24VPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.5`
wtWebioEA2x2ERP-24VPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.3.2.1.1.6`

wtWebioEA2x2ERP-24VOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.31.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebioEA2x2ERP-24VOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.31.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebioEA2x2ERP-24VPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.1`
wtWebioEA2x2ERP-24VPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.2`
wtWebioEA2x2ERP-24VPortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.3`
wtWebioEA2x2ERP-24VPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.4`
wtWebioEA2x2ERP-24VPortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.5`
wtWebioEA2x2ERP-24VPortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.6`
wtWebioEA2x2ERP-24VPortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.7`
wtWebioEA2x2ERP-24VPortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.8`
wtWebioEA2x2ERP-24VPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.9`
wtWebioEA2x2ERP-24VPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebioEA2x2ERP-24VPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unus…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.31.3.2.2.1.10`

wtIpWatcher-24VInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtIpWatcher-24VInputEntry entry .1.3.6.1.4.1.5040.1.2.32.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.32.1.3.1.1`
wtIpWatcher-24VInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.32.1.3.1.2`
wtIpWatcher-24VInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.1.3.1.3`
wtIpWatcher-24VInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Constraints: `range: 0-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.1.3.1.4`

wtIpWatcher-24VOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtIpWatcher-24VOutputEntry entry .1.3.6.1.4.1.5040.1.2.32.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VOutputNo mandatory Output number.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.1.5.1.1`
wtIpWatcher-24VOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.1.5.1.2`

wtIpWatcher-24VAlarmOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.1.8 · 1 row entry · 2 columns

Open in standard view

List of alarm indices..

wtIpWatcher-24VAlarmOutputEntry entry .1.3.6.1.4.1.5040.1.2.32.1.8.1

Index reference.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VAlarmOutputState mandatory State of the alarm, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.1.8.1.1`
wtIpWatcher-24VAlarmTriggerState mandatory State of the trigger condition, 0-OFF, 1-ON.	Integer32 Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.1.8.1.2`

wtIpWatcher-24VIpListIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.2 · 1 row entry · 1 columns

Open in standard view

Table of inices.

wtIpWatcher-24VIpListIfEntry entry .1.3.6.1.4.1.5040.1.2.32.3.1.3.11.2.1

Table entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VIpListNo mandatory List number of this entry.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.2.1.1`

wtIpWatcher-24VIpListTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3 · 1 row entry · 5 columns

Open in standard view

List of ip addresses.

wtIpWatcher-24VIpListEntry entry .1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1

List entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VIpListName mandatory Name or IP address.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1.1`
wtIpWatcher-24VIpListPort mandatory Port number, zero in the case of broadcast or Ping.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1.2`
wtIpWatcher-24VIpListService mandatory Binary coded scan mode, only one mode can be selected at a particular time: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Ping enable Bit 1-7: unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1.3`
wtIpWatcher-24VIpListEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: enabled in Alarm 1 Bit 1: enabled in Alarm 2 Bit 2: enabled in Alarm 3 Bit 3: enabled in Alarm 4 Bit 4-7: unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1.4`
wtIpWatcher-24VIpListAlias mandatory Alias Name	OctetStringr/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.32.3.1.3.11.3.1.5`

wtIpWatcher-24VAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtIpWatcher-24VAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.32.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebio577xxEA1x1AlarmNo

Column	Syntax	OID
wtIpWatcher-24VAlarmNo mandatory Numbers of the alarms.	Integer32 Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.2.1.1`

wtIpWatcher-24VAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.1.5.3 · 1 row entry · 49 columns

Open in standard view

List of settings depending on the alarm number.

wtIpWatcher-24VAlarmEntry entry .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.5`
wtIpWatcher-24VAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.6`
wtIpWatcher-24VAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.7`
wtIpWatcher-24VAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.8`
wtIpWatcher-24VAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.9`
wtIpWatcher-24VAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.10`
wtIpWatcher-24VAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.11`
wtIpWatcher-24VAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.12`
wtIpWatcher-24VAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.13`
wtIpWatcher-24VAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.14`
wtIpWatcher-24VAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.15`
wtIpWatcher-24VAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.16`
wtIpWatcher-24VAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.17`
wtIpWatcher-24VAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.18`
wtIpWatcher-24VAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.19`
wtIpWatcher-24VAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.20`
wtIpWatcher-24VAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.21`
wtIpWatcher-24VAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.22`
wtIpWatcher-24VAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.23`
wtIpWatcher-24VAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.24`
wtIpWatcher-24VAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.25`
wtIpWatcher-24VAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.26`
wtIpWatcher-24VAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.27`
wtIpWatcher-24VAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.28`
wtIpWatcher-24VAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.29`
wtIpWatcher-24VAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.30`
wtIpWatcher-24VAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.31`
wtIpWatcher-24VAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.32`
wtIpWatcher-24VAlarmName mandatory Name of the alarm.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.33`
wtIpWatcher-24VAlarmGlobalEnable mandatory Binary coded alarm activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.34`
wtIpWatcher-24VAlarmCounterClear mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Counter clear on Alarm acknowledge Bit 0…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.35`
wtIpWatcher-24VAlarmAckEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Software acknowledge enable Bit 0 : Hard…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.36`
wtIpWatcher-24VAlarmAckPort mandatory Number of the input, which clears the alarm (1-6).	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.37`
wtIpWatcher-24VAlarmSetPort mandatory Number of the output, which will be set by this alarm (1-6). The configuration of pulse mode and polarity defined in the port output section is used.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.38`
wtIpWatcher-24VAlarmMailTrgClearSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.39`
wtIpWatcher-24VAlarmMailTrgClearText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.40`
wtIpWatcher-24VAlarmSnmpTrapTrgClearText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.41`
wtIpWatcher-24VAlarmUdpTrgClearText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.42`
wtIpWatcher-24VAlarmTcpTrgClearText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.43`
wtIpWatcher-24VAlarmSyslogTrgClearText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.44`
wtIpWatcher-24VAlarmFtpTrgClearText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.45`
wtIpWatcher-24VAlarmMailTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.46`
wtIpWatcher-24VAlarmSnmpTrapTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.47`
wtIpWatcher-24VAlarmUdpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.48`
wtIpWatcher-24VAlarmTcpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.49`
wtIpWatcher-24VAlarmSyslogTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.50`
wtIpWatcher-24VAlarmFtpTrapTxEnable mandatory Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Alarm OFF message enable Bit 2 : Trigger…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.51`
wtIpWatcher-24VAlarmTriggerCount mandatory Alarm will be send if the trigger condition occours TriggerCount times.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.52`
wtIpWatcher-24VAlarmPollingRate mandatory Time in seconds.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.53`

wtIpWatcher-24VInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.2.1 · 1 row entry · 3 columns

Open in standard view

List of settings depending on the input number.

wtIpWatcher-24VInputPortEntry entry .1.3.6.1.4.1.5040.1.2.32.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.2.1.1.1`
wtIpWatcher-24VPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.2.1.1.2`
wtIpWatcher-24VPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.2.1.1.4`

wtIpWatcher-24VOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.32.3.2.2 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the output number.

wtIpWatcher-24VOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.32.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtIpWatcher-24VPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.2.2.1.1`
wtIpWatcher-24VPortOutputText mandatory Description of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.32.3.2.2.1.2`
wtIpWatcher-24VPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.32.3.2.2.1.9`
wtIpWatcher-24VPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtIpWatcher-24VPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused O…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.32.3.2.2.1.10`

wtTrapReceiver2x2InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.1.3 · 1 row entry · 2 columns

Open in standard view

List of input indices.

wtTrapReceiver2x2InputEntry entry .1.3.6.1.4.1.5040.1.2.33.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.33.1.3.1.1`
wtTrapReceiver2x2InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.1.3.1.4`

wtTrapReceiver2x2OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtTrapReceiver2x2OutputEntry entry .1.3.6.1.4.1.5040.1.2.33.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2OutputNo mandatory Output number.	Integer32 Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.1.5.1.1`
wtTrapReceiver2x2OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.1.5.1.2`

wtTrapReceiver2x2ActionOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.1.8 · 1 row entry · 2 columns

Open in standard view

List of alarm indices..

wtTrapReceiver2x2ActionOutputEntry entry .1.3.6.1.4.1.5040.1.2.33.1.8.1

Index reference.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2ActionOutputState mandatory State of the alarm, 0-OFF, 1-ON.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.1.8.1.1`
wtTrapReceiver2x2ActionTriggerState mandatory State of the trigger condition, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.1.8.1.2`

wtTrapReceiver2x2SystemTimerTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.1.9 · 1 row entry · 1 columns

Open in standard view

List of system timer.

wtTrapReceiver2x2SystemTimerEntry entry .1.3.6.1.4.1.5040.1.2.33.1.9.1

Number of the system timer.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2SystemTimerNo mandatory Index number of the system timer.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.33.1.9.1.1`

wtTrapReceiver2x2ButtonTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.1.10 · 1 row entry · 1 columns

Open in standard view

List of buttons.

wtTrapReceiver2x2ButtonEntry entry .1.3.6.1.4.1.5040.1.2.33.1.10.1

Number of the button.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2ButtonNo mandatory Index numder of the button.	Integer32	`.1.3.6.1.4.1.5040.1.2.33.1.10.1.1`

wtTrapReceiver2x2ActionIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtTrapReceiver2x2ActionIfEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2ActionNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.2.1.1`

wtTrapReceiver2x2ActionTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.5.3 · 1 row entry · 27 columns

Open in standard view

List of settings depending on the alarm number.

wtTrapReceiver2x2ActionEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1

Action parameters of the individual alarms.

Indexes

wtWebio577xxEA12x12BinaryModeNo

Column	Syntax	OID
wtTrapReceiver2x2ActionInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The four OCTETS contain the mask whic…	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.1`
wtTrapReceiver2x2ActionInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.5`
wtTrapReceiver2x2ActionEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pending TCP connections Bit 4: TCP Client e…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.6`
wtTrapReceiver2x2ActionMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.7`
wtTrapReceiver2x2ActionMailSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.8`
wtTrapReceiver2x2ActionMailText mandatory Action mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.9`
wtTrapReceiver2x2ActionSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.10`
wtTrapReceiver2x2ActionSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.11`
wtTrapReceiver2x2ActionUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.12`
wtTrapReceiver2x2ActionUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.13`
wtTrapReceiver2x2ActionUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.14`
wtTrapReceiver2x2ActionTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.15`
wtTrapReceiver2x2ActionTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.16`
wtTrapReceiver2x2ActionTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.17`
wtTrapReceiver2x2ActionSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.18`
wtTrapReceiver2x2ActionSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.19`
wtTrapReceiver2x2ActionSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.20`
wtTrapReceiver2x2ActionFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.21`
wtTrapReceiver2x2ActionFtpFileName mandatory Name of the file including path informations.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.22`
wtTrapReceiver2x2ActionFtpText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.23`
wtTrapReceiver2x2ActionFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.24`
wtTrapReceiver2x2ActionTimerCron mandatory This entry contains 10 space or tab seperated text fields defining a time window for sending time triggered messages. 2 CRON time for start time and stop time are defined as follows: Start time: field 1: Minutes Range 0…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.25`
wtTrapReceiver2x2ActionName mandatory Name of the alarm.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.33`
wtTrapReceiver2x2ActionGlobalEnable mandatory Binary coded alarm activation: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bi…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.34`
wtTrapReceiver2x2ActionSystemTimerTrigger mandatory Binary coded system timer activation: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OC…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.55`
wtTrapReceiver2x2ActionSystemButtonTrigger mandatory Binary coded button activation: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4:…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.56`
wtTrapReceiver2x2ActionOutputAction mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determines…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.57`

wtTrapReceiver2x2WatchListIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.2 · 1 row entry · 1 columns

Open in standard view

Table of inices.

wtTrapReceiver2x2WatchListIfEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.6.1.2.1

Table entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2WatchListNo mandatory List number of this entry.	Integer32	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.2.1.1`

wtTrapReceiver2x2WatchListTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3 · 1 row entry · 9 columns

Open in standard view

List of ip addresses.

wtTrapReceiver2x2WatchListEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1

List entry.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2WatchListName mandatory Name or IP address.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.1`
wtTrapReceiver2x2WatchListPort mandatory Port number, zero in the case of broadcast or Ping.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.2`
wtTrapReceiver2x2WatchListService mandatory Binary coded scan mode, only one mode can be selected at a particular time: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: unused Bit 1: unused Bit 2: SNMP Trap reveive enable Bit 3: Syslog rece…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.3`
wtTrapReceiver2x2WatchListEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: Bit 0: enabled in Report 9 Bit 1: enabled in Report 10 Bit 2: enabled in Report 11 Bit 3: enabled in Report 12 Bit 4-7: unused Octet 4: Bit 0…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.4`
wtTrapReceiver2x2WatchListAlias mandatory Alias Name	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.5`
wtTrapReceiver2x2WatchListTrapNo mandatory SNMP Trap No: this filter is only active, if SNMP Trap reveive enable in wtTrapReceiver2x2WatchListService is set. wtTrapReceiver2x2WatchListTrapNo-ColdStart(0), wtTrapReceiver2x2WatchListTrapNo-WarmStart(1), wtTrapRece…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.6`
wtTrapReceiver2x2WatchListSpecificNo mandatory SNMP Specific No: this filter is only active, if SNMP Trap reveive enable in wtTrapReceiver2x2WatchListService is set.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.7`
wtTrapReceiver2x2WatchListFacility mandatory Syslog message level Facility: this filter is only active, if Syslog receive enable in wtTrapReceiver2x2WatchListService is set. wtTrapReceiver2x2WatchListFacility-Emergency(0), wtTrapReceiver2x2WatchListFacility-Alert(…	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.8`
wtTrapReceiver2x2WatchListSeverity mandatory Syslog message level Severity: this filter is only active, if Syslog receive enable in wtTrapReceiver2x2WatchListService is set. wtTrapReceiver2x2WatchListSeverity-kernel-messages(0), wtTrapReceiver2x2WatchListSeverity-…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.1.3.1.9`

wtTrapReceiver2x2SystemTimerPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.6.2.1 · 1 row entry · 3 columns

Open in standard view

List of settings depending on the SystemTimer number.

wtTrapReceiver2x2SystemTimerPortEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.6.2.1.1

SystemTimer parameter for the individual SystemTimer.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2PortSystemTimerEnable mandatory Binary coded SystemTimer enable: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4, Bit 1-7: …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.2.1.1.1`
wtTrapReceiver2x2PortSystemTimerName mandatory Name of the SystemTimer.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.2.1.1.2`
wtTrapReceiver2x2PortSystemTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.2.1.1.3`

wtTrapReceiver2x2ButtonPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the button number.

wtTrapReceiver2x2ButtonPortEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1.1

Button parameter for the individual buttons.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2PortButtonEnable mandatory Binary coded button enable: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4, Bit 1-7: ungen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1.1.1`
wtTrapReceiver2x2PortButtonName mandatory Name of the button.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1.1.2`
wtTrapReceiver2x2PortButtonText mandatory Description of the button.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1.1.3`
wtTrapReceiver2x2PortButtonAccess mandatory Binary coded button access level: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 3-7: unused …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.3.1.1.4`

wtTrapReceiver2x2InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.6.4.1 · 1 row entry · 3 columns

Open in standard view

List of settings depending on the input number.

wtTrapReceiver2x2InputPortEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.6.4.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.4.1.1.1`
wtTrapReceiver2x2PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.4.1.1.2`
wtTrapReceiver2x2PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.6.4.1.1.4`

wtTrapReceiver2x2OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1 · 1 row entry · 4 columns

Open in standard view

List of settings depending on the output number.

wtTrapReceiver2x2OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtTrapReceiver2x2PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1.1.1`
wtTrapReceiver2x2PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1.1.2`
wtTrapReceiver2x2PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1.1.9`
wtTrapReceiver2x2PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtTrapReceiver2x2PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.33.3.1.7.1.1.1.10`

wtWebio577xxEA1x1InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebio577xxEA1x1InputEntry entry .1.3.6.1.4.1.5040.1.2.48.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.48.1.3.1.1`
wtWebio577xxEA1x1InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.48.1.3.1.2`
wtWebio577xxEA1x1InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.1.3.1.3`
wtWebio577xxEA1x1InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.1.3.1.4`

wtWebio577xxEA1x1OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebio577xxEA1x1OutputEntry entry .1.3.6.1.4.1.5040.1.2.48.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.48.1.5.1.1`
wtWebio577xxEA1x1OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.1.5.1.2`

wtWebio577xxEA1x1BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebio577xxEA1x1BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.48.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1BinaryModeNo mandatory Number of the binary channel.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.2.1.1`

wtWebio577xxEA1x1BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3 · 1 row entry · 23 columns

Open in standard view

Table of properties of the binary mode.

wtWebio577xxEA1x1BinaryEntry entry .1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.1`
wtWebio577xxEA1x1BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.2`
wtWebio577xxEA1x1BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.3`
wtWebio577xxEA1x1BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.4`
wtWebio577xxEA1x1BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.5`
wtWebio577xxEA1x1BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.6`
wtWebio577xxEA1x1BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.7`
wtWebio577xxEA1x1BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.8`
wtWebio577xxEA1x1BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.9`
wtWebio577xxEA1x1BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.10`
wtWebio577xxEA1x1BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.11`
wtWebio577xxEA1x1BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.12`
wtWebio577xxEA1x1BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.13`
wtWebio577xxEA1x1BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.14`
wtWebio577xxEA1x1BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.15`
wtWebio577xxEA1x1BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.16`
wtWebio577xxEA1x1BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.17`
wtWebio577xxEA1x1BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.18`
wtWebio577xxEA1x1BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.19`
wtWebio577xxEA1x1BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.20`
wtWebio577xxEA1x1BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.21`
wtWebio577xxEA1x1BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.22`
wtWebio577xxEA1x1BinaryTcpClientServerUserName mandatory User Name to login at the remote server, if authentication needed.	OctetString	`.1.3.6.1.4.1.5040.1.2.48.3.1.3.6.3.1.23`

wtWebio577xxEA1x1OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebio577xxEA1x1OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.48.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.4.1.1.1`

wtWebio577xxEA1x1AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebio577xxEA1x1AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.48.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.2.1.1`

wtWebio577xxEA1x1AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.1.5.3 · 1 row entry · 54 columns

Open in standard view

List of settings depending on the alarm number.

wtWebio577xxEA1x1AlarmEntry entry .1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.1`
wtWebio577xxEA1x1AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.2`
wtWebio577xxEA1x1AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.3`
wtWebio577xxEA1x1AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebio577xxEA1x1AlarmInputTrigger are no…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.4`
wtWebio577xxEA1x1AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.5`
wtWebio577xxEA1x1AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Bit 0: UDP enable Bit1-7: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog Messages enable Bit 4: F…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.6`
wtWebio577xxEA1x1AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.7`
wtWebio577xxEA1x1AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.8`
wtWebio577xxEA1x1AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.9`
wtWebio577xxEA1x1AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.10`
wtWebio577xxEA1x1AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.11`
wtWebio577xxEA1x1AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.12`
wtWebio577xxEA1x1AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.13`
wtWebio577xxEA1x1AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.14`
wtWebio577xxEA1x1AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.15`
wtWebio577xxEA1x1AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.16`
wtWebio577xxEA1x1AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.17`
wtWebio577xxEA1x1AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.18`
wtWebio577xxEA1x1AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.19`
wtWebio577xxEA1x1AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.20`
wtWebio577xxEA1x1AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.21`
wtWebio577xxEA1x1AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.22`
wtWebio577xxEA1x1AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.23`
wtWebio577xxEA1x1AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.24`
wtWebio577xxEA1x1AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.25`
wtWebio577xxEA1x1AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.26`
wtWebio577xxEA1x1AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.27`
wtWebio577xxEA1x1AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.28`
wtWebio577xxEA1x1AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.29`
wtWebio577xxEA1x1AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.30`
wtWebio577xxEA1x1AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.31`
wtWebio577xxEA1x1AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.32`
wtWebio577xxEA1x1AlarmGlobalEnable mandatory Binary coded alarm activation: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.34`
wtWebio577xxEA1x1AlarmCombinationLogic mandatory Binary coded alarm activation:: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : OR Bit 0 : AND	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.58`
wtWebio577xxEA1x1AlarmTrgMqttTopic mandatory MQTT subscribe topic.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.59`
wtWebio577xxEA1x1AlarmTrgMqttTopicText mandatory Receiving this text from the MQTT Broker, Alarm will be triggered.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.60`
wtWebio577xxEA1x1AlarmHttpReqAuthEnable mandatory Binary coded alarm activation: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.61`
wtWebio577xxEA1x1AlarmHttpReqAuthUser mandatory HTTP Request: User	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.62`
wtWebio577xxEA1x1AlarmHttpReqAuthPassword mandatory HTTP Request: Password	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.63`
wtWebio577xxEA1x1AlarmHttpReqSetUrl mandatory HTTP Request: Set URL	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.64`
wtWebio577xxEA1x1AlarmHttpReqClearUrl mandatory HTTP Request: Clear URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.65`
wtWebio577xxEA1x1AlarmHttpReqServerPort mandatory HTTP Request: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.66`
wtWebio577xxEA1x1AlarmMqttTopicPath mandatory MQTT Publish: Topic path	OctetStringr/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.67`
wtWebio577xxEA1x1AlarmMqttTopicSetTopic mandatory MQTT Publish: Topic SET message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.68`
wtWebio577xxEA1x1AlarmMqttTopicClear mandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.69`
wtWebio577xxEA1x1AlarmSetOutputsOwn mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.70`
wtWebio577xxEA1x1AlarmSetOutputsServerIp mandatory Set Outputs: Server IP Address	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.71`
wtWebio577xxEA1x1AlarmSetOutputsServerPort mandatory Set Outputs: Server Port	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.72`
wtWebio577xxEA1x1AlarmSetOutputsServerPassword mandatory Set Outputs: Server Pasword	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.73`
wtWebio577xxEA1x1AlarmSetOutputsServerOutputs mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.74`
wtWebio577xxEA1x1AlarmSetOutputsDest mandatory Binary coded value: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : set …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.75`
wtWebio577xxEA1x1AlarmSnmpManagerPort mandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.76`
wtWebio577xxEA1x1AlarmMqttQoS mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: QoS 0 Bit 1: QoS 1 Bit 2: QoS 2 Bit 3-7:unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.77`
wtWebio577xxEA1x1AlarmMqttRetain mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : retain enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.1.5.3.1.78`

wtWebio577xxEA1x1InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebio577xxEA1x1InputPortEntry entry .1.3.6.1.4.1.5040.1.2.48.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.1`
wtWebio577xxEA1x1PortInputText mandatory Description of the input.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.2`
wtWebio577xxEA1x1PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.3`
wtWebio577xxEA1x1PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.4`
wtWebio577xxEA1x1PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.5`
wtWebio577xxEA1x1PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.3.2.1.1.6`

wtWebio577xxEA1x1OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.48.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebio577xxEA1x1OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.48.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA1x1PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.1`
wtWebio577xxEA1x1PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.2`
wtWebio577xxEA1x1PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.3`
wtWebio577xxEA1x1PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.4`
wtWebio577xxEA1x1PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.5`
wtWebio577xxEA1x1PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.6`
wtWebio577xxEA1x1PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.7`
wtWebio577xxEA1x1PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.8`
wtWebio577xxEA1x1PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.9`
wtWebio577xxEA1x1PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebio577xxEA1x1PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.48.3.2.2.1.10`

wtWebio577xxEA12x12InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebio577xxEA12x12InputEntry entry .1.3.6.1.4.1.5040.1.2.49.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.49.1.3.1.1`
wtWebio577xxEA12x12InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.49.1.3.1.2`
wtWebio577xxEA12x12InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.1.3.1.3`
wtWebio577xxEA12x12InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.1.3.1.4`

wtWebio577xxEA12x12OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebio577xxEA12x12OutputEntry entry .1.3.6.1.4.1.5040.1.2.49.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.49.1.5.1.1`
wtWebio577xxEA12x12OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.1.5.1.2`

wtWebio577xxEA12x12BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebio577xxEA12x12BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.49.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12BinaryModeNo mandatory Number of the binary channel.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.2.1.1`

wtWebio577xxEA12x12BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3 · 1 row entry · 23 columns

Open in standard view

Table of properties of the binary mode.

wtWebio577xxEA12x12BinaryEntry entry .1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.1`
wtWebio577xxEA12x12BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.2`
wtWebio577xxEA12x12BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.3`
wtWebio577xxEA12x12BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.4`
wtWebio577xxEA12x12BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.5`
wtWebio577xxEA12x12BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.6`
wtWebio577xxEA12x12BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.7`
wtWebio577xxEA12x12BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.8`
wtWebio577xxEA12x12BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Constraints: `range: 4-4` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.9`
wtWebio577xxEA12x12BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.10`
wtWebio577xxEA12x12BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.11`
wtWebio577xxEA12x12BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.12`
wtWebio577xxEA12x12BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.13`
wtWebio577xxEA12x12BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.14`
wtWebio577xxEA12x12BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.15`
wtWebio577xxEA12x12BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.16`
wtWebio577xxEA12x12BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.17`
wtWebio577xxEA12x12BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.18`
wtWebio577xxEA12x12BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.19`
wtWebio577xxEA12x12BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.20`
wtWebio577xxEA12x12BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.21`
wtWebio577xxEA12x12BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.22`
wtWebio577xxEA12x12BinaryTcpClientServerUserName mandatory User Name to login at the remote server, if authentication needed.	OctetString	`.1.3.6.1.4.1.5040.1.2.49.3.1.3.6.3.1.23`

wtWebio577xxEA12x12OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebio577xxEA12x12OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.49.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.4.1.1.1`

wtWebio577xxEA12x12AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebio577xxEA12x12AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.49.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebio577xxEA2x2InputNo

Column	Syntax	OID
wtWebio577xxEA12x12AlarmNo mandatory Numbers of the alarms.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.2.1.1`

wtWebio577xxEA12x12AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.1.5.3 · 1 row entry · 54 columns

Open in standard view

List of settings depending on the alarm number.

wtWebio577xxEA12x12AlarmEntry entry .1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.1`
wtWebio577xxEA12x12AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.2`
wtWebio577xxEA12x12AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.3`
wtWebio577xxEA12x12AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebio577xxEA12x12AlarmInputTrigger are …	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.4`
wtWebio577xxEA12x12AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.5`
wtWebio577xxEA12x12AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Bit 0: UDP enable Bit1-7: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog Messages enable Bit 4: F…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.6`
wtWebio577xxEA12x12AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.7`
wtWebio577xxEA12x12AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 1-2`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.8`
wtWebio577xxEA12x12AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.9`
wtWebio577xxEA12x12AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.10`
wtWebio577xxEA12x12AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.11`
wtWebio577xxEA12x12AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.12`
wtWebio577xxEA12x12AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.13`
wtWebio577xxEA12x12AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.14`
wtWebio577xxEA12x12AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.15`
wtWebio577xxEA12x12AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.16`
wtWebio577xxEA12x12AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.17`
wtWebio577xxEA12x12AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.18`
wtWebio577xxEA12x12AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.19`
wtWebio577xxEA12x12AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.20`
wtWebio577xxEA12x12AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.21`
wtWebio577xxEA12x12AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.22`
wtWebio577xxEA12x12AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.23`
wtWebio577xxEA12x12AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.24`
wtWebio577xxEA12x12AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.25`
wtWebio577xxEA12x12AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.26`
wtWebio577xxEA12x12AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.27`
wtWebio577xxEA12x12AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.28`
wtWebio577xxEA12x12AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.29`
wtWebio577xxEA12x12AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.30`
wtWebio577xxEA12x12AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.31`
wtWebio577xxEA12x12AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.32`
wtWebio577xxEA12x12AlarmGlobalEnable mandatory Binary coded alarm activation: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.34`
wtWebio577xxEA12x12AlarmCombinationLogic mandatory Binary coded logic, all Input/Output-trigger will be combined: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : OR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.58`
wtWebio577xxEA12x12AlarmTrgMqttTopic mandatory MQTT subscribe topic.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.59`
wtWebio577xxEA12x12AlarmTrgMqttTopicText mandatory Receiving this text from the MQTT Broker, Alarm will be triggered.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.60`
wtWebio577xxEA12x12AlarmHttpReqAuthEnable mandatory Binary coded value: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.61`
wtWebio577xxEA12x12AlarmHttpReqAuthUser mandatory HTTP Request: User	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.62`
wtWebio577xxEA12x12AlarmHttpReqAuthPassword mandatory HTTP Request: Password	OctetStringr/w Constraints: `range: 1-12`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.63`
wtWebio577xxEA12x12AlarmHttpReqSetUrl mandatory HTTP Request: Set URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.64`
wtWebio577xxEA12x12AlarmHttpReqClearUrl mandatory HTTP Request: Clear URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.65`
wtWebio577xxEA12x12AlarmHttpReqServerPort mandatory HTTP Request: Server Port	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.66`
wtWebio577xxEA12x12AlarmMqttTopicPath mandatory MQTT Publish: Topic path	OctetStringr/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.67`
wtWebio577xxEA12x12AlarmMqttTopicSetTopic mandatory MQTT Publish: Topic SET message	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.68`
wtWebio577xxEA12x12AlarmMqttTopicClear mandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.69`
wtWebio577xxEA12x12AlarmSetOutputsOwn mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.70`
wtWebio577xxEA12x12AlarmSetOutputsServerIp mandatory Set Outputs: Server IP Address	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.71`
wtWebio577xxEA12x12AlarmSetOutputsServerPort mandatory Set Outputs: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.72`
wtWebio577xxEA12x12AlarmSetOutputsServerPassword mandatory Set Outputs: Server Pasword	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.73`
wtWebio577xxEA12x12AlarmSetOutputsServerOutputs mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.74`
wtWebio577xxEA12x12AlarmSetOutputsDest mandatory Binary coded value: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : set outputs of remote server. Bit 0 : set outputs of this WEB-IO	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.75`
wtWebio577xxEA12x12AlarmSnmpManagerPort mandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.76`
wtWebio577xxEA12x12AlarmMqttQoS mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: QoS 0 Bit 1: QoS 1 Bit 2: QoS 2 Bit 3-7:unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.77`
wtWebio577xxEA12x12AlarmMqttRetain mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : retain enable Bit 1-7 : unused	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.1.5.3.1.78`

wtWebio577xxEA12x12InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebio577xxEA12x12InputPortEntry entry .1.3.6.1.4.1.5040.1.2.49.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12PortInputName mandatory Name of the input.	OctetStringr/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.1`
wtWebio577xxEA12x12PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.2`
wtWebio577xxEA12x12PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.3`
wtWebio577xxEA12x12PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Constraints: `range: 1-65535` Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.4`
wtWebio577xxEA12x12PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.5`
wtWebio577xxEA12x12PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.3.2.1.1.6`

wtWebio577xxEA12x12OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.49.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebio577xxEA12x12OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.49.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x12PortOutputName mandatory Name of the output.	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.1`
wtWebio577xxEA12x12PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.2`
wtWebio577xxEA12x12PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.3`
wtWebio577xxEA12x12PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.4`
wtWebio577xxEA12x12PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (wt…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.5`
wtWebio577xxEA12x12PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: Bit 0-3 : inputs 8-11 OCTET 4: Bit 0-7 : inputs 0-7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.6`
wtWebio577xxEA12x12PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.7`
wtWebio577xxEA12x12PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: Bit 0-3 : Output Inverter enable 8-11 OCTET 4: Bit 0-7 : Output Inverter enable 0-7	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.8`
wtWebio577xxEA12x12PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.9`
wtWebio577xxEA12x12PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebio577xxEA12x12PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unus…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.49.3.2.2.1.10`

wtWebio577xxEA12x6RelInputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebio577xxEA12x6RelInputEntry entry .1.3.6.1.4.1.5040.1.2.51.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelInputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.51.1.3.1.1`
wtWebio577xxEA12x6RelInputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.51.1.3.1.2`
wtWebio577xxEA12x6RelInputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.1.3.1.3`
wtWebio577xxEA12x6RelInputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.1.3.1.4`

wtWebio577xxEA12x6RelOutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebio577xxEA12x6RelOutputEntry entry .1.3.6.1.4.1.5040.1.2.51.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelOutputNo mandatory Output number.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.5040.1.2.51.1.5.1.1`
wtWebio577xxEA12x6RelOutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.1.5.1.2`

wtWebio577xxEA12x6RelBinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebio577xxEA12x6RelBinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.51.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelBinaryModeNo mandatory Number of the binary channel.	Integer32 Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.2.1.1`

wtWebio577xxEA12x6RelBinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3 · 1 row entry · 23 columns

Open in standard view

Table of properties of the binary mode.

wtWebio577xxEA12x6RelBinaryEntry entry .1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelBinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.1`
wtWebio577xxEA12x6RelBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 12-12`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.2`
wtWebio577xxEA12x6RelBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.3`
wtWebio577xxEA12x6RelBinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.4`
wtWebio577xxEA12x6RelBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.5`
wtWebio577xxEA12x6RelBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.6`
wtWebio577xxEA12x6RelBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.7`
wtWebio577xxEA12x6RelBinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.8`
wtWebio577xxEA12x6RelBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.9`
wtWebio577xxEA12x6RelBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.10`
wtWebio577xxEA12x6RelBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.11`
wtWebio577xxEA12x6RelBinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.12`
wtWebio577xxEA12x6RelBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.13`
wtWebio577xxEA12x6RelBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.14`
wtWebio577xxEA12x6RelBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.15`
wtWebio577xxEA12x6RelBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.16`
wtWebio577xxEA12x6RelBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.17`
wtWebio577xxEA12x6RelBinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.18`
wtWebio577xxEA12x6RelBinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.19`
wtWebio577xxEA12x6RelBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.20`
wtWebio577xxEA12x6RelBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.21`
wtWebio577xxEA12x6RelBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.22`
wtWebio577xxEA12x6RelBinaryTcpClientServerUserName mandatory User Name to login at the remote server, if authentication needed.	OctetString Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.3.6.3.1.23`

wtWebio577xxEA12x6RelOutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebio577xxEA12x6RelOutputModeEntry entry .1.3.6.1.4.1.5040.1.2.51.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelOutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w Constraints: `range: 4-4`	`.1.3.6.1.4.1.5040.1.2.51.3.1.4.1.1.1`

wtWebio577xxEA12x6RelAlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebio577xxEA12x6RelAlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.51.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelAlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.2.1.1`

wtWebio577xxEA12x6RelAlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.1.5.3 · 1 row entry · 54 columns

Open in standard view

List of settings depending on the alarm number.

wtWebio577xxEA12x6RelAlarmEntry entry .1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelAlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.1`
wtWebio577xxEA12x6RelAlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.2`
wtWebio577xxEA12x6RelAlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.3`
wtWebio577xxEA12x6RelAlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebio577xxEA12x6RelAlarmInputTrigger ar…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.4`
wtWebio577xxEA12x6RelAlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.5`
wtWebio577xxEA12x6RelAlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Bit 0: UDP enable Bit1-7: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog Messages enable Bit 4: F…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.6`
wtWebio577xxEA12x6RelAlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.7`
wtWebio577xxEA12x6RelAlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.8`
wtWebio577xxEA12x6RelAlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.9`
wtWebio577xxEA12x6RelAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.10`
wtWebio577xxEA12x6RelAlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.11`
wtWebio577xxEA12x6RelAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.12`
wtWebio577xxEA12x6RelAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.13`
wtWebio577xxEA12x6RelAlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.14`
wtWebio577xxEA12x6RelAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.15`
wtWebio577xxEA12x6RelAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.16`
wtWebio577xxEA12x6RelAlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.17`
wtWebio577xxEA12x6RelAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.18`
wtWebio577xxEA12x6RelAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.19`
wtWebio577xxEA12x6RelAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.20`
wtWebio577xxEA12x6RelAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.21`
wtWebio577xxEA12x6RelAlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.22`
wtWebio577xxEA12x6RelAlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.23`
wtWebio577xxEA12x6RelAlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.24`
wtWebio577xxEA12x6RelAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.25`
wtWebio577xxEA12x6RelAlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.26`
wtWebio577xxEA12x6RelAlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.27`
wtWebio577xxEA12x6RelAlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.28`
wtWebio577xxEA12x6RelAlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.29`
wtWebio577xxEA12x6RelAlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.30`
wtWebio577xxEA12x6RelAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.31`
wtWebio577xxEA12x6RelAlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.32`
wtWebio577xxEA12x6RelAlarmGlobalEnable mandatory Binary coded alarm activation: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.34`
wtWebio577xxEA12x6RelAlarmCombinationLogic mandatory Binary coded logic, all Input/Output-trigger will be combined: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : OR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.58`
wtWebio577xxEA12x6RelAlarmTrgMqttTopic mandatory MQTT subscribe topic.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.59`
wtWebio577xxEA12x6RelAlarmTrgMqttTopicText mandatory Receiving this text from the MQTT Broker, Alarm will be triggered.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.60`
wtWebio577xxEA12x6RelAlarmHttpReqAuthEnable mandatory Binary coded value: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.61`
wtWebio577xxEA12x6RelAlarmHttpReqAuthUser mandatory HTTP Request: User	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.62`
wtWebio577xxEA12x6RelAlarmHttpReqAuthPassword mandatory HTTP Request: Password	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.63`
wtWebio577xxEA12x6RelAlarmHttpReqSetUrl mandatory HTTP Request: Set URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.64`
wtWebio577xxEA12x6RelAlarmHttpReqClearUrl mandatory HTTP Request: Clear URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.65`
wtWebio577xxEA12x6RelAlarmHttpReqServerPort mandatory HTTP Request: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.66`
wtWebio577xxEA12x6RelAlarmMqttTopicPath mandatory MQTT Publish: Topic path	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.67`
wtWebio577xxEA12x6RelAlarmMqttTopicSetTopic mandatory MQTT Publish: Topic SET message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.68`
wtWebio577xxEA12x6RelAlarmMqttTopicClear mandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.69`
wtWebio577xxEA12x6RelAlarmSetOutputsOwn mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.70`
wtWebio577xxEA12x6RelAlarmSetOutputsServerIp mandatory Set Outputs: Server IP Address	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.71`
wtWebio577xxEA12x6RelAlarmSetOutputsServerPort mandatory Set Outputs: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.72`
wtWebio577xxEA12x6RelAlarmSetOutputsServerPassword mandatory Set Outputs: Server Pasword	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.73`
wtWebio577xxEA12x6RelAlarmSetOutputsServerOutputs mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.74`
wtWebio577xxEA12x6RelAlarmSetOutputsDest mandatory Binary coded value: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : set outputs of remote server. Bit 0 : set outputs of this WEB-IO	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.75`
wtWebio577xxEA12x6RelAlarmSnmpManagerPort mandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.76`
wtWebio577xxEA12x6RelAlarmMqttQoS mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: QoS 0 Bit 1: QoS 1 Bit 2: QoS 2 Bit 3-7:unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.77`
wtWebio577xxEA12x6RelAlarmMqttRetain mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : retain enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.78`

wtWebio577xxEA12x6RelInputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebio577xxEA12x6RelInputPortEntry entry .1.3.6.1.4.1.5040.1.2.51.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelPortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.1`
wtWebio577xxEA12x6RelPortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.2`
wtWebio577xxEA12x6RelPortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.3`
wtWebio577xxEA12x6RelPortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.4`
wtWebio577xxEA12x6RelPortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.5`
wtWebio577xxEA12x6RelPortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.3.2.1.1.6`

wtWebio577xxEA12x6RelOutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.51.3.2.2 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the output number.

wtWebio577xxEA12x6RelOutputPortEntry entry .1.3.6.1.4.1.5040.1.2.51.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA12x6RelPortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.1`
wtWebio577xxEA12x6RelPortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.2`
wtWebio577xxEA12x6RelPortOutputGroupMode mandatory No function within this device.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.3`
wtWebio577xxEA12x6RelPortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.4`
wtWebio577xxEA12x6RelPortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.9`
wtWebio577xxEA12x6RelPortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebio577xxEA12x6RelPortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: un…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.51.3.2.2.1.10`

wtWebio577xxEA2x2InputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.1.3 · 1 row entry · 4 columns

Open in standard view

List of input indices.

wtWebio577xxEA2x2InputEntry entry .1.3.6.1.4.1.5040.1.2.52.1.3.1

Number of the inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2InputNo mandatory Index numbers of the inputs.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.1.3.1.1`
wtWebio577xxEA2x2InputCounter mandatory Value of the input counter.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.1.3.1.2`
wtWebio577xxEA2x2InputCounterClear mandatory Clears the input counter after returning its value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.1.3.1.3`
wtWebio577xxEA2x2InputState mandatory Value of a single input bit, 0-OFF, 1-ON.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.1.3.1.4`

wtWebio577xxEA2x2OutputTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.1.5 · 1 row entry · 2 columns

Open in standard view

List of output indices.

wtWebio577xxEA2x2OutputEntry entry .1.3.6.1.4.1.5040.1.2.52.1.5.1

Number of the outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2OutputNo mandatory Output number.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.1.5.1.1`
wtWebio577xxEA2x2OutputState mandatory Value of a single output bit, 0-OFF, 1-ON.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.1.5.1.2`

wtWebio577xxEA2x2BinaryIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.2 · 1 row entry · 1 columns

Open in standard view

Table of indices.

wtWebio577xxEA2x2BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.52.3.1.3.6.2.1

Indices of the binary channels.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2BinaryModeNo mandatory Number of the binary channel.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.2.1.1`

wtWebio577xxEA2x2BinaryTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3 · 1 row entry · 23 columns

Open in standard view

Table of properties of the binary mode.

wtWebio577xxEA2x2BinaryEntry entry .1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1

Binary properties.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.1`
wtWebio577xxEA2x2BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.2`
wtWebio577xxEA2x2BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.3`
wtWebio577xxEA2x2BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.4`
wtWebio577xxEA2x2BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.5`
wtWebio577xxEA2x2BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.6`
wtWebio577xxEA2x2BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.7`
wtWebio577xxEA2x2BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.8`
wtWebio577xxEA2x2BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.9`
wtWebio577xxEA2x2BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.10`
wtWebio577xxEA2x2BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.11`
wtWebio577xxEA2x2BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.12`
wtWebio577xxEA2x2BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.13`
wtWebio577xxEA2x2BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.14`
wtWebio577xxEA2x2BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.15`
wtWebio577xxEA2x2BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.16`
wtWebio577xxEA2x2BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.17`
wtWebio577xxEA2x2BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.18`
wtWebio577xxEA2x2BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.19`
wtWebio577xxEA2x2BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.20`
wtWebio577xxEA2x2BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.21`
wtWebio577xxEA2x2BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.22`
wtWebio577xxEA2x2BinaryTcpClientServerUserName mandatory User Name to login at the remote server, if authentication needed.	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.23`

wtWebio577xxEA2x2OutputModeTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.1.4.1 · 1 row entry · 1 columns

Open in standard view

Table of output mode configurations dependent on the output indices.

wtWebio577xxEA2x2OutputModeEntry entry .1.3.6.1.4.1.5040.1.2.52.3.1.4.1.1

Output mode configurations of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2OutputModeBit mandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corres…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.4.1.1.1`

wtWebio577xxEA2x2AlarmIfTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.1.5.2 · 1 row entry · 1 columns

Open in standard view

List of alarm indices.

wtWebio577xxEA2x2AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.52.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2AlarmNo mandatory Numbers of the alarms.	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.2.1.1`

wtWebio577xxEA2x2AlarmTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.1.5.3 · 1 row entry · 54 columns

Open in standard view

List of settings depending on the alarm number.

wtWebio577xxEA2x2AlarmEntry entry .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. The first four OCTETS contain the mas…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.1`
wtWebio577xxEA2x2AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the m…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.2`
wtWebio577xxEA2x2AlarmSystemTrigger mandatory Binary coded trigger conditions: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Warm Start Bit 2 : Cold Sta…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.3`
wtWebio577xxEA2x2AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in wtWebio577xxEA2x2AlarmInputTrigger are no…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.4`
wtWebio577xxEA2x2AlarmInterval mandatory Send interval for alarm messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.5`
wtWebio577xxEA2x2AlarmEnable mandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Bit 0: UDP enable Bit1-7: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog Messages enable Bit 4: F…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.6`
wtWebio577xxEA2x2AlarmMailAddr mandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.7`
wtWebio577xxEA2x2AlarmMailSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.8`
wtWebio577xxEA2x2AlarmMailText mandatory Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.9`
wtWebio577xxEA2x2AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.10`
wtWebio577xxEA2x2AlarmSnmpTrapText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.11`
wtWebio577xxEA2x2AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.12`
wtWebio577xxEA2x2AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.13`
wtWebio577xxEA2x2AlarmUdpText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.14`
wtWebio577xxEA2x2AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.15`
wtWebio577xxEA2x2AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.16`
wtWebio577xxEA2x2AlarmTcpText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.17`
wtWebio577xxEA2x2AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.18`
wtWebio577xxEA2x2AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.19`
wtWebio577xxEA2x2AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.20`
wtWebio577xxEA2x2AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.21`
wtWebio577xxEA2x2AlarmFtpFileName mandatory Name of the file including path informations.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.22`
wtWebio577xxEA2x2AlarmFtpText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.23`
wtWebio577xxEA2x2AlarmFtpOption mandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.24`
wtWebio577xxEA2x2AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.25`
wtWebio577xxEA2x2AlarmMailReleaseSubject mandatory Subject line for alarm mail.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.26`
wtWebio577xxEA2x2AlarmMailReleaseText mandatory Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.27`
wtWebio577xxEA2x2AlarmSnmpTrapReleaseText mandatory This text appears in the trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.28`
wtWebio577xxEA2x2AlarmUdpReleaseText mandatory This text appears in the UDP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.29`
wtWebio577xxEA2x2AlarmTcpReleaseText mandatory This text appears in the TCP trap body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.30`
wtWebio577xxEA2x2AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.31`
wtWebio577xxEA2x2AlarmFtpReleaseText mandatory Message text to store on the FTP server.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.32`
wtWebio577xxEA2x2AlarmGlobalEnable mandatory Binary coded alarm activation: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Alarm enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.34`
wtWebio577xxEA2x2AlarmCombinationLogic mandatory Binary coded logic: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : OR Bit 0 : AND	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.58`
wtWebio577xxEA2x2AlarmTrgMqttTopic mandatory MQTT subscribe topic.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.59`
wtWebio577xxEA2x2AlarmTrgMqttTopicText mandatory Reveiving this message from the MQTT Broker, this alarm will be triggered.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.60`
wtWebio577xxEA2x2AlarmHttpReqAuthEnable mandatory Binnary coded value: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.61`
wtWebio577xxEA2x2AlarmHttpReqAuthUser mandatory HTTP Request: User	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.62`
wtWebio577xxEA2x2AlarmHttpReqAuthPassword mandatory HTTP Request: Password	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.63`
wtWebio577xxEA2x2AlarmHttpReqSetUrl mandatory HTTP Request: Set URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.64`
wtWebio577xxEA2x2AlarmHttpReqClearUrl mandatory HTTP Request: Clear URL	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.65`
wtWebio577xxEA2x2AlarmHttpReqServerPort mandatory HTTP Request: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.66`
wtWebio577xxEA2x2AlarmMqttTopicPath mandatory MQTT Publish: Topic path	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.67`
wtWebio577xxEA2x2AlarmMqttTopicSetTopic mandatory MQTT Publish: Topic SET message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.68`
wtWebio577xxEA2x2AlarmMqttTopicClear mandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.69`
wtWebio577xxEA2x2AlarmSetOutputsOwn mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.70`
wtWebio577xxEA2x2AlarmSetOutputsServerIp mandatory Set Outputs: Server IP Address	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.71`
wtWebio577xxEA2x2AlarmSetOutputsServerPort mandatory Set Outputs: Server Port	Integer32r/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.72`
wtWebio577xxEA2x2AlarmSetOutputsServerPassword mandatory Set Outputs: Server Pasword	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.73`
wtWebio577xxEA2x2AlarmSetOutputsServerOutputs mandatory This variable allows setting of individual output. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determine…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.74`
wtWebio577xxEA2x2AlarmSetOutputsDest mandatory Binary coded value: Bit 0 = LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : set outputs of remote server. Bit 0 : set outputs of this WEB-IO	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.75`
wtWebio577xxEA2x2AlarmSnmpManagerPort mandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.76`
wtWebio577xxEA2x2AlarmMqttQoS mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: QoS 0 Bit 1: QoS 1 Bit 2: QoS 2 Bit 3-7:unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.77`
wtWebio577xxEA2x2AlarmMqttRetain mandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : retain enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.78`

wtWebio577xxEA2x2InputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.2.1 · 1 row entry · 6 columns

Open in standard view

List of settings depending on the input number.

wtWebio577xxEA2x2InputPortEntry entry .1.3.6.1.4.1.5040.1.2.52.3.2.1.1

Input parameter for the individual inputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2PortInputName mandatory Name of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.1`
wtWebio577xxEA2x2PortInputText mandatory Description of the input.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.2`
wtWebio577xxEA2x2PortInputMode mandatory Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequen…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.3`
wtWebio577xxEA2x2PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.4`
wtWebio577xxEA2x2PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : negative polarity Bit 1 : positive polarity Bit 2-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.5`
wtWebio577xxEA2x2PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek), are ignored.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.3.2.1.1.6`

wtWebio577xxEA2x2OutputPortTable

table mandatory

.1.3.6.1.4.1.5040.1.2.52.3.2.2 · 1 row entry · 10 columns

Open in standard view

List of settings depending on the output number.

wtWebio577xxEA2x2OutputPortEntry entry .1.3.6.1.4.1.5040.1.2.52.3.2.2.1

Output parameters of the individual outputs.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebio577xxEA2x2PortOutputName mandatory Name of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.1`
wtWebio577xxEA2x2PortOutputText mandatory Description of the output.	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.2`
wtWebio577xxEA2x2PortOutputGroupMode mandatory It is possible to connect outputs together to increase the output current. This could be done by connecting 2 or 4 outputs in a group together. All bits of such a group has to be set all together in the same way. This v…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.3`
wtWebio577xxEA2x2PortOutputSafetyState mandatory This variable allows setting of individual digital outputs. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which d…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.4`
wtWebio577xxEA2x2PortLogicInputMask mandatory Selecting one of these inputs by setting the corresponding bit to 1 enables the logic function for the output identified by the index within this table. The calculation take place in 4 steps: 1. Selecting inputs (w…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.5`
wtWebio577xxEA2x2PortLogicInputInverter mandatory Every input bit selected here will be inverted. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0-1 : inputs 0-1	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.6`
wtWebio577xxEA2x2PortLogicFunction mandatory This determines the logic function. No more than one function may be selected. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : logic function OR (default) Bit 1 : logic function AND Bit 2-7 :…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.7`
wtWebio577xxEA2x2PortLogicOutputInverter mandatory The logical operation result could be inverteted by setting the corresponding bit to 1. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 0 : Output Inverter enable Bit 1-7 : unused	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.8`
wtWebio577xxEA2x2PortPulseDuration mandatory Pulse length in 1/1000 sec. Setting this value to zero, disables the pulse output.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.9`
wtWebio577xxEA2x2PortPulsePolarity mandatory This value defines the polarity of the output pulse, if wtWebio577xxEA2x2PortPulseDuration is not set to zero. After the pulse is finished, the output switches back to the opposite state. OCTET 1: unused OCTET 2: unused…	OctetStringr/w	`.1.3.6.1.4.1.5040.1.2.52.3.2.2.1.10`