wtTrapReceiver2x2ActionOutputAction
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.57
Object
column
mandatory
r/w
OctetString
This variable allows setting of individual output.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
The first four OCTETS contain the mask which determines which of the outputs are to
be considered (corresponding bit = 1) and which outputs are to ignore
(corresponding bit = 0):
OCTET 1 : unused
OCTET 2 : unused
OCTET 3 : unused
OCTET 4, Bit 0-1: Mask for digital outputs 0-1
OCTETS 5-8 contain the level (1=HIGH, 0=LOW) which the outputs
should assume:
OCTET 5 : unused
OCTET 6 : unused
OCTET 7 : unused
OCTET 8, Bit 0-1: Level of digital outputs 0-1
OCTETS 9-12 contain the TOOGLE bit (1=ON, 0=OFF). outputs masked with the TOGGLE bit trigger change
their state on every action. Settings in OCTET 5-9 are then unused:
OCTET 9: unused
OCTET 10: unused
OCTET 11: unused
OCTET 12, Bit 0-1: TOGGLE bits of digital outputs 0-1
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.57- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtTrapReceiver2x2ActionEntry
- Table
- wtTrapReceiver2x2ActionTable
- Siblings
- 26
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtTrapReceiver2x2ActionInputTrigger mandatory This variable allows setting of individual input trigger conditions.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.1 |
| wtTrapReceiver2x2ActionSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.10 |
| wtTrapReceiver2x2ActionSnmpTrapText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.11 |
| wtTrapReceiver2x2ActionUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.12 |
| wtTrapReceiver2x2ActionUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.13 |
| wtTrapReceiver2x2ActionUdpText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.14 |
| wtTrapReceiver2x2ActionTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.15 |
| wtTrapReceiver2x2ActionTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.16 |
| wtTrapReceiver2x2ActionTcpText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.17 |
| wtTrapReceiver2x2ActionSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.18 |
| wtTrapReceiver2x2ActionSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.19 |
| wtTrapReceiver2x2ActionSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.20 |
| wtTrapReceiver2x2ActionFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.21 |
| wtTrapReceiver2x2ActionFtpFileName mandatory Name of the file including path informations. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.22 |
| wtTrapReceiver2x2ActionFtpText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.23 |
| wtTrapReceiver2x2ActionFtpOption mandatory Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.24 |
| wtTrapReceiver2x2ActionTimerCron mandatory This entry contains 10 space or tab seperated text fields defining a time window for sending
time triggered messages. 2 CRON time for start time and stop time are defined as follo… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.25 |
| wtTrapReceiver2x2ActionName mandatory Name of the alarm. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.33 |
| wtTrapReceiver2x2ActionGlobalEnable mandatory Binary coded alarm activation:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.34 |
| wtTrapReceiver2x2ActionInterval mandatory Send interval for alarm messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.5 |
| wtTrapReceiver2x2ActionSystemTimerTrigger mandatory Binary coded system timer activation:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unus… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.55 |
| wtTrapReceiver2x2ActionSystemButtonTrigger mandatory Binary coded button activation:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OC… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.56 |
| wtTrapReceiver2x2ActionEnable mandatory Binary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: UDP enable
Bit 3: Send inputs to pendi… | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.6 |
| wtTrapReceiver2x2ActionMailAddr mandatory E-Mail address for sending the alarm mail to. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.7 |
| wtTrapReceiver2x2ActionMailSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.8 |
| wtTrapReceiver2x2ActionMailText mandatory Action mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.33.3.1.5.3.1.9 |