wtWebioEA6x6BinaryTcpClientServerHttpPort

Webio-Digital-MIB-US · .1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.22

Object

column mandatory r/w Integer32

HTTP port number of the remote device at TCP Client Mode. In the operating mode
Box2Box connection status informations will be exchanged through this port.

Context

MIB: Webio-Digital-MIB-US
OID: .1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.22
Type: column
Access: readwrite
Status: mandatory
Parent: wtWebioEA6x6BinaryEntry
Table: wtWebioEA6x6BinaryTable
Siblings: 21

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wtWebioEA6x6BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bi…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.1`
wtWebioEA6x6BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.10`
wtWebioEA6x6BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.11`
wtWebioEA6x6BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.12`
wtWebioEA6x6BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.13`
wtWebioEA6x6BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote por…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.14`
wtWebioEA6x6BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote devi…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.15`
wtWebioEA6x6BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.16`
wtWebioEA6x6BinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.17`
wtWebioEA6x6BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.18`
wtWebioEA6x6BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.19`
wtWebioEA6x6BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.2`
wtWebioEA6x6BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.20`
wtWebioEA6x6BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.21`
wtWebioEA6x6BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.3`
wtWebioEA6x6BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.4`
wtWebioEA6x6BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.5`
wtWebioEA6x6BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to ze…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.6`
wtWebioEA6x6BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.7`
wtWebioEA6x6BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exis…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.8`
wtWebioEA6x6BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.24.3.1.3.6.3.1.9`

Indexes