wtWebio577xxEA2x2BinaryUdpPeerInterval

Webio-Digital-MIB-US · .1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.17

Object

column mandatory r/w Integer32

Configurable interval with a 100ms base, in which the Webio device sends
data to the configured remote device. A interval of zero stopps the 
periodical sending.

Context

MIB: Webio-Digital-MIB-US
OID: .1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.17
Type: column
Access: readwrite
Status: mandatory
Parent: wtWebio577xxEA2x2BinaryEntry
Table: wtWebio577xxEA2x2BinaryTable
Siblings: 22

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wtWebio577xxEA2x2BinaryOperationMode mandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bi…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.1`
wtWebio577xxEA2x2BinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.10`
wtWebio577xxEA2x2BinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.11`
wtWebio577xxEA2x2BinaryTcpClientApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.12`
wtWebio577xxEA2x2BinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.13`
wtWebio577xxEA2x2BinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote por…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.14`
wtWebio577xxEA2x2BinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote devi…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.15`
wtWebio577xxEA2x2BinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.16`
wtWebio577xxEA2x2BinaryUdpPeerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.18`
wtWebio577xxEA2x2BinaryConnectedPort mandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.19`
wtWebio577xxEA2x2BinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.2`
wtWebio577xxEA2x2BinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.20`
wtWebio577xxEA2x2BinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.21`
wtWebio577xxEA2x2BinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.22`
wtWebio577xxEA2x2BinaryTcpClientServerUserName mandatory User Name to login at the remote server, if authentication needed.	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.23`
wtWebio577xxEA2x2BinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless ev…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.3`
wtWebio577xxEA2x2BinaryTcpServerApplicationMode mandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.4`
wtWebio577xxEA2x2BinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.5`
wtWebio577xxEA2x2BinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to ze…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.6`
wtWebio577xxEA2x2BinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address …	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.7`
wtWebio577xxEA2x2BinaryTcpClientServerPassword mandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exis…	column	OctetString	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.8`
wtWebio577xxEA2x2BinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box…	column	Integer32	`.1.3.6.1.4.1.5040.1.2.52.3.1.3.6.3.1.9`

Notification Objects