wtWebio577xxEA2x2AlarmEnable
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.6
Object
column
mandatory
r/w
OctetString
Binary coded alarm enable: Octet 1: unused Octet 2: unused Bit 0: UDP enable Bit1-7: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog Messages enable Bit 4: FTP enable Bit 5: HTTP Request enable Bit 6 MQTT Publish enable Bit 7: Set Outputs
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtWebio577xxEA2x2AlarmEntry
- Table
- wtWebio577xxEA2x2AlarmTable
- Siblings
- 53
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebio577xxEA2x2AlarmInputTrigger mandatory This variable allows setting of individual input trigger conditions.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.1 |
| wtWebio577xxEA2x2AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.10 |
| wtWebio577xxEA2x2AlarmSnmpTrapText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.11 |
| wtWebio577xxEA2x2AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.12 |
| wtWebio577xxEA2x2AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.13 |
| wtWebio577xxEA2x2AlarmUdpText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.14 |
| wtWebio577xxEA2x2AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.15 |
| wtWebio577xxEA2x2AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.16 |
| wtWebio577xxEA2x2AlarmTcpText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.17 |
| wtWebio577xxEA2x2AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.18 |
| wtWebio577xxEA2x2AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.19 |
| wtWebio577xxEA2x2AlarmOutputTrigger mandatory This variable allows setting of individual output trigger conditions.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the L… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.2 |
| wtWebio577xxEA2x2AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.20 |
| wtWebio577xxEA2x2AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.21 |
| wtWebio577xxEA2x2AlarmFtpFileName mandatory Name of the file including path informations. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.22 |
| wtWebio577xxEA2x2AlarmFtpText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.23 |
| wtWebio577xxEA2x2AlarmFtpOption mandatory Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.24 |
| wtWebio577xxEA2x2AlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger a message, weekday and day of month
are… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.25 |
| wtWebio577xxEA2x2AlarmMailReleaseSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.26 |
| wtWebio577xxEA2x2AlarmMailReleaseText mandatory Release Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.27 |
| wtWebio577xxEA2x2AlarmSnmpTrapReleaseText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.28 |
| wtWebio577xxEA2x2AlarmUdpReleaseText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.29 |
| wtWebio577xxEA2x2AlarmSystemTrigger mandatory Binary coded trigger conditions:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4,
Bit 4-7: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.3 |
| wtWebio577xxEA2x2AlarmTcpReleaseText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.30 |
| wtWebio577xxEA2x2AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.31 |
| wtWebio577xxEA2x2AlarmFtpReleaseText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.32 |
| wtWebio577xxEA2x2AlarmGlobalEnable mandatory Binary coded alarm activation:
Bit 0 = LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0 : Alarm enable | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.34 |
| wtWebio577xxEA2x2AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value
exceeds this max. value, the corresponding alarm is triggered. Input counters with
its mask bit unset in w… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.4 |
| wtWebio577xxEA2x2AlarmInterval mandatory Send interval for alarm messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.5 |
| wtWebio577xxEA2x2AlarmCombinationLogic mandatory Binary coded logic:
Bit 0 = LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : OR
Bit 0 : AND | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.58 |
| wtWebio577xxEA2x2AlarmTrgMqttTopic mandatory MQTT subscribe topic. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.59 |
| wtWebio577xxEA2x2AlarmTrgMqttTopicText mandatory Reveiving this message from the MQTT Broker, this alarm will be triggered. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.60 |
| wtWebio577xxEA2x2AlarmHttpReqAuthEnable mandatory Binnary coded value:
Bit 0 = LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0 : HHTP Request Authentication enable | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.61 |
| wtWebio577xxEA2x2AlarmHttpReqAuthUser mandatory HTTP Request: User | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.62 |
| wtWebio577xxEA2x2AlarmHttpReqAuthPassword mandatory HTTP Request: Password | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.63 |
| wtWebio577xxEA2x2AlarmHttpReqSetUrl mandatory HTTP Request: Set URL | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.64 |
| wtWebio577xxEA2x2AlarmHttpReqClearUrl mandatory HTTP Request: Clear URL | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.65 |
| wtWebio577xxEA2x2AlarmHttpReqServerPort mandatory HTTP Request: Server Port | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.66 |
| wtWebio577xxEA2x2AlarmMqttTopicPath mandatory MQTT Publish: Topic path | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.67 |
| wtWebio577xxEA2x2AlarmMqttTopicSetTopic mandatory MQTT Publish: Topic SET message | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.68 |
| wtWebio577xxEA2x2AlarmMqttTopicClear mandatory MQTT Publish: Topic CLEAR message | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.69 |
| wtWebio577xxEA2x2AlarmMailAddr mandatory E-Mail address for sending the alarm mail to. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.7 |
| wtWebio577xxEA2x2AlarmSetOutputsOwn mandatory This variable allows setting of individual output.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
The first four… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.70 |
| wtWebio577xxEA2x2AlarmSetOutputsServerIp mandatory Set Outputs: Server IP Address | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.71 |
| wtWebio577xxEA2x2AlarmSetOutputsServerPort mandatory Set Outputs: Server Port | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.72 |
| wtWebio577xxEA2x2AlarmSetOutputsServerPassword mandatory Set Outputs: Server Pasword | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.73 |
| wtWebio577xxEA2x2AlarmSetOutputsServerOutputs mandatory This variable allows setting of individual output.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
The first four… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.74 |
| wtWebio577xxEA2x2AlarmSetOutputsDest mandatory Binary coded value:
Bit 0 = LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : set outputs of remote server.
Bit 0 : set outputs of this WE… | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.75 |
| wtWebio577xxEA2x2AlarmSnmpManagerPort mandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.76 |
| wtWebio577xxEA2x2AlarmMqttQoS mandatory Binary coded value:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: QoS 0
Bit 1: QoS 1
Bit 2: QoS 2
Bit 3-7:unused | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.77 |
| wtWebio577xxEA2x2AlarmMqttRetain mandatory Binary coded value:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : retain enable
Bit 1-7 : unused | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.78 |
| wtWebio577xxEA2x2AlarmMailSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.8 |
| wtWebio577xxEA2x2AlarmMailText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.52.3.1.5.3.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebAlarm6x6AlarmSnmpTrapReleaseText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.28 |