wtIpWatcherAlarmTriggerCount

Webio-Digital-MIB-US · .1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.52
MIB view Table view

Object

column mandatory r/w Integer32 
Alarm will be send if the trigger condition occours TriggerCount times.

Context

MIB
Webio-Digital-MIB-US
OID
.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.52
Type
column
Access
readwrite
Status
mandatory
Parent
wtIpWatcherAlarmEntry
Table
wtIpWatcherAlarmTable
Siblings
48

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wtIpWatcherAlarmSnmpManagerIP mandatory
IP address of the SNMP Manager to which the Webio device should send SNMP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.10
wtIpWatcherAlarmSnmpTrapText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.11
wtIpWatcherAlarmUdpIpAddr mandatory
IP address of the UDP listener to which the Webio device should send UDP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.12
wtIpWatcherAlarmUdpPort mandatory
Port number of the UDP listener to which the Webio device should send UDP traps.
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.13
wtIpWatcherAlarmUdpText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.14
wtIpWatcherAlarmTcpIpAddr mandatory
IP address of the TCP listener to which the Webio device should send TCP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.15
wtIpWatcherAlarmTcpPort mandatory
Port number of the TCP listener to which the Webio device should send TCP traps.
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.16
wtIpWatcherAlarmTcpText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.17
wtIpWatcherAlarmSyslogIpAddr mandatory
IP address of the syslog server to which the Webio device should send syslog messages.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.18
wtIpWatcherAlarmSyslogPort mandatory
Port number of the syslog server to which the Webio device should send syslog messages.
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.19
wtIpWatcherAlarmSyslogText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.20
wtIpWatcherAlarmFtpDataPort mandatory
Local data port: 1..65535 or AUTO: the next free port will be assigned.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.21
wtIpWatcherAlarmFtpFileName mandatory
Name of the file including path informations.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.22
wtIpWatcherAlarmFtpText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.23
wtIpWatcherAlarmFtpOption mandatory
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused …
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.24
wtIpWatcherAlarmTimerCron mandatory
This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.25
wtIpWatcherAlarmMailReleaseSubject mandatory
Subject line for alarm mail.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.26
wtIpWatcherAlarmMailReleaseText mandatory
Release Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.27
wtIpWatcherAlarmSnmpTrapReleaseText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.28
wtIpWatcherAlarmUdpReleaseText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.29
wtIpWatcherAlarmTcpReleaseText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.30
wtIpWatcherAlarmSyslogReleaseText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.31
wtIpWatcherAlarmFtpReleaseText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.32
wtIpWatcherAlarmName mandatory
Name of the alarm.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.33
wtIpWatcherAlarmGlobalEnable mandatory
Binary coded alarm activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.34
wtIpWatcherAlarmCounterClear mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Cou…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.35
wtIpWatcherAlarmAckEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Sof…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.36
wtIpWatcherAlarmAckPort mandatory
Number of the input, which clears the alarm (1-6).
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.37
wtIpWatcherAlarmSetPort mandatory
Number of the output, which will be set by this alarm (1-6). The configuration of pulse mode and polarity defined in the port output section is used.
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.38
wtIpWatcherAlarmMailTrgClearSubject mandatory
Subject line for alarm mail.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.39
wtIpWatcherAlarmMailTrgClearText mandatory
Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.40
wtIpWatcherAlarmSnmpTrapTrgClearText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.41
wtIpWatcherAlarmUdpTrgClearText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.42
wtIpWatcherAlarmTcpTrgClearText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.43
wtIpWatcherAlarmSyslogTrgClearText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.44
wtIpWatcherAlarmFtpTrgClearText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.45
wtIpWatcherAlarmMailTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.46
wtIpWatcherAlarmSnmpTrapTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.47
wtIpWatcherAlarmUdpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.48
wtIpWatcherAlarmTcpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.49
wtIpWatcherAlarmInterval mandatory
Send interval for alarm messages.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.5
wtIpWatcherAlarmSyslogTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.50
wtIpWatcherAlarmFtpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.51
wtIpWatcherAlarmPollingRate mandatory
Time in seconds.
columnInteger32.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.53
wtIpWatcherAlarmEnable mandatory
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: UDP enable Bit 3: Send inputs to pendi…
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.6
wtIpWatcherAlarmMailAddr mandatory
E-Mail address for sending the alarm mail to.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.7
wtIpWatcherAlarmMailSubject mandatory
Subject line for alarm mail.
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.8
wtIpWatcherAlarmMailText mandatory
Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.27.3.1.5.3.1.9