wtWebAlarm6x6AlarmMailSubject

Webio-Digital-MIB-US · .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.8
MIB view Table view

Object

column mandatory r/w OctetString 
Subject line for alarm mail.

Context

MIB
Webio-Digital-MIB-US
OID
.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.8
Type
column
Access
readwrite
Status
mandatory
Parent
wtWebAlarm6x6AlarmEntry
Table
wtWebAlarm6x6AlarmTable
Siblings
47

Syntax

OctetString

Values & Constraints

Object Constraints
range: 4-4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wtWebAlarm6x6AlarmInputTrigger mandatory
This variable allows setting of individual input trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.1
wtWebAlarm6x6AlarmSnmpManagerIP mandatory
IP address of the SNMP Manager to which the Webio device should send SNMP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.10
wtWebAlarm6x6AlarmSnmpTrapText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.11
wtWebAlarm6x6AlarmUdpIpAddr mandatory
IP address of the UDP listener to which the Webio device should send UDP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.12
wtWebAlarm6x6AlarmUdpPort mandatory
Port number of the UDP listener to which the Webio device should send UDP traps.
columnInteger32.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.13
wtWebAlarm6x6AlarmUdpText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.14
wtWebAlarm6x6AlarmTcpIpAddr mandatory
IP address of the TCP listener to which the Webio device should send TCP traps.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.15
wtWebAlarm6x6AlarmTcpPort mandatory
Port number of the TCP listener to which the Webio device should send TCP traps.
columnInteger32.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.16
wtWebAlarm6x6AlarmTcpText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.17
wtWebAlarm6x6AlarmSyslogIpAddr mandatory
IP address of the syslog server to which the Webio device should send syslog messages.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.18
wtWebAlarm6x6AlarmSyslogPort mandatory
Port number of the syslog server to which the Webio device should send syslog messages.
columnInteger32.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.19
wtWebAlarm6x6AlarmSyslogText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.20
wtWebAlarm6x6AlarmFtpDataPort mandatory
Local data port: 1..65535 or AUTO: the next free port will be assigned.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.21
wtWebAlarm6x6AlarmFtpFileName mandatory
Name of the file including path informations.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.22
wtWebAlarm6x6AlarmFtpText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.23
wtWebAlarm6x6AlarmFtpOption mandatory
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused …
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.24
wtWebAlarm6x6AlarmMailReleaseSubject mandatory
Subject line for alarm mail.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.26
wtWebAlarm6x6AlarmMailReleaseText mandatory
Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.27
wtWebAlarm6x6AlarmSnmpTrapReleaseText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.28
wtWebAlarm6x6AlarmUdpReleaseText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.29
wtWebAlarm6x6AlarmTcpReleaseText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.30
wtWebAlarm6x6AlarmSyslogReleaseText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.31
wtWebAlarm6x6AlarmFtpReleaseText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.32
wtWebAlarm6x6AlarmName mandatory
Name of the alarm.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.33
wtWebAlarm6x6AlarmGlobalEnable mandatory
Binary coded alarm activation: Die OCTETS werden bitweise interpretiert. Bit 0 entspricht dem LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.34
wtWebAlarm6x6AlarmCounterClear mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Cou…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.35
wtWebAlarm6x6AlarmAckEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Sof…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.36
wtWebAlarm6x6AlarmAckPort mandatory
Number of the input, which clears the alarm (1-6).
columnInteger32.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.37
wtWebAlarm6x6AlarmSetPort mandatory
Number of the output, which will be set by this alarm (1-6). The configuration of pulse mode and polarity defined in the port output section is used.
columnInteger32.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.38
wtWebAlarm6x6AlarmMailTrgClearSubject mandatory
Subject line for alarm mail.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.39
wtWebAlarm6x6AlarmMaxCounterValue mandatory
This variable configures a max. counter value. If an input counter value exceeds this max. value, the corresponding alarm is triggered. Input counters with its mask bit unset in w…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.4
wtWebAlarm6x6AlarmMailTrgClearText mandatory
Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.40
wtWebAlarm6x6AlarmSnmpTrapTrgClearText mandatory
This text appears in the trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.41
wtWebAlarm6x6AlarmUdpTrgClearText mandatory
This text appears in the UDP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.42
wtWebAlarm6x6AlarmTcpTrgClearText mandatory
This text appears in the TCP trap body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.43
wtWebAlarm6x6AlarmSyslogTrgClearText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.44
wtWebAlarm6x6AlarmFtpTrgClearText mandatory
Message text to store on the FTP server.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.45
wtWebAlarm6x6AlarmMailTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.46
wtWebAlarm6x6AlarmSnmpTrapTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.47
wtWebAlarm6x6AlarmUdpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.48
wtWebAlarm6x6AlarmTcpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.49
wtWebAlarm6x6AlarmInterval mandatory
Send interval for alarm messages.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.5
wtWebAlarm6x6AlarmSyslogTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.50
wtWebAlarm6x6AlarmFtpTrapTxEnable mandatory
Binary coded options: The OCTETS are interpreted bit-by-bit. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Ala…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.51
wtWebAlarm6x6AlarmEnable mandatory
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Output Switch Enable Bit 1: Mail Enable Bit 2: SNMP Trap enable Bit 3: UDP enable…
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.6
wtWebAlarm6x6AlarmMailAddr mandatory
E-Mail address for sending the alarm mail to.
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.7
wtWebAlarm6x6AlarmMailText mandatory
Alarm mail text: States of the Webio device can be included by using special tags. Please refer to the respective Webio manual
columnOctetString.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.9