wtWebAlarm6x6AlarmInputTrigger
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.1
Object
column
mandatory
r/w
OctetString
This variable allows setting of individual input trigger conditions.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
The first four OCTETS contain the mask which determines which of the inputs are to
be considered (corresponding bit = 1) and which inputs are to ignore
(corresponding bit = 0):
OCTET 1 : unused
OCTET 2 : unused
OCTET 3: unused
OCTET 4, Bit 0-5: Mask for digital inputs 0-5
Bit 6-7: unused
OCTETS 5-8 contain the level (1=HIGH, 0=LOW) which the inputs
should assume:
OCTET 5 : unused
OCTET 6 : unused
OCTET 7 : unused
OCTET 8, Bit 0-5: Level of digital inputs 0-5
Bit 6-7: unused
OCTETS 9-12 contain the counter bit (1=ON, 0=OFF). Inputs masked with the counter bit trigger an alarm
when the corresponding counter reaching the wtWebAlarm6x6AlarmMaxCounterValue. Settings in OCTET 5-9 are then unused:
OCTET 9 : unused
OCTET 10: unused
OCTET 11: unused
OCTET 12, Bit 0-5: Counter bits of digital inputs 0-5
Bit 6-7: unused.
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.1- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtWebAlarm6x6AlarmEntry
- Table
- wtWebAlarm6x6AlarmTable
- Siblings
- 47
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebAlarm6x6AlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.10 |
| wtWebAlarm6x6AlarmSnmpTrapText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.11 |
| wtWebAlarm6x6AlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.12 |
| wtWebAlarm6x6AlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.13 |
| wtWebAlarm6x6AlarmUdpText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.14 |
| wtWebAlarm6x6AlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.15 |
| wtWebAlarm6x6AlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.16 |
| wtWebAlarm6x6AlarmTcpText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.17 |
| wtWebAlarm6x6AlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.18 |
| wtWebAlarm6x6AlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.19 |
| wtWebAlarm6x6AlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.20 |
| wtWebAlarm6x6AlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.21 |
| wtWebAlarm6x6AlarmFtpFileName mandatory Name of the file including path informations. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.22 |
| wtWebAlarm6x6AlarmFtpText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.23 |
| wtWebAlarm6x6AlarmFtpOption mandatory Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.24 |
| wtWebAlarm6x6AlarmMailReleaseSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.26 |
| wtWebAlarm6x6AlarmMailReleaseText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.27 |
| wtWebAlarm6x6AlarmSnmpTrapReleaseText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.28 |
| wtWebAlarm6x6AlarmUdpReleaseText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.29 |
| wtWebAlarm6x6AlarmTcpReleaseText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.30 |
| wtWebAlarm6x6AlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.31 |
| wtWebAlarm6x6AlarmFtpReleaseText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.32 |
| wtWebAlarm6x6AlarmName mandatory Name of the alarm. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.33 |
| wtWebAlarm6x6AlarmGlobalEnable mandatory Binary coded alarm activation:
Die OCTETS werden bitweise interpretiert.
Bit 0 entspricht dem LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.34 |
| wtWebAlarm6x6AlarmCounterClear mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : Cou… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.35 |
| wtWebAlarm6x6AlarmAckEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : Sof… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.36 |
| wtWebAlarm6x6AlarmAckPort mandatory Number of the input, which clears the alarm (1-6). | column | Integer32 | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.37 |
| wtWebAlarm6x6AlarmSetPort mandatory Number of the output, which will be set by this alarm (1-6).
The configuration of pulse mode and polarity defined in the port output section is used. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.38 |
| wtWebAlarm6x6AlarmMailTrgClearSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.39 |
| wtWebAlarm6x6AlarmMaxCounterValue mandatory This variable configures a max. counter value. If an input counter value
exceeds this max. value, the corresponding alarm is triggered. Input counters with
its mask bit unset in w… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.4 |
| wtWebAlarm6x6AlarmMailTrgClearText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.40 |
| wtWebAlarm6x6AlarmSnmpTrapTrgClearText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.41 |
| wtWebAlarm6x6AlarmUdpTrgClearText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.42 |
| wtWebAlarm6x6AlarmTcpTrgClearText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.43 |
| wtWebAlarm6x6AlarmSyslogTrgClearText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.44 |
| wtWebAlarm6x6AlarmFtpTrgClearText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.45 |
| wtWebAlarm6x6AlarmMailTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.46 |
| wtWebAlarm6x6AlarmSnmpTrapTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.47 |
| wtWebAlarm6x6AlarmUdpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.48 |
| wtWebAlarm6x6AlarmTcpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.49 |
| wtWebAlarm6x6AlarmInterval mandatory Send interval for alarm messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.5 |
| wtWebAlarm6x6AlarmSyslogTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.50 |
| wtWebAlarm6x6AlarmFtpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.51 |
| wtWebAlarm6x6AlarmEnable mandatory Binary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Output Switch Enable
Bit 1: Mail Enable
Bit 2: SNMP Trap enable
Bit 3: UDP enable… | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.6 |
| wtWebAlarm6x6AlarmMailAddr mandatory E-Mail address for sending the alarm mail to. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.7 |
| wtWebAlarm6x6AlarmMailSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.8 |
| wtWebAlarm6x6AlarmMailText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.20.3.1.5.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebioEA6x6InputNo mandatory Index numbers of the inputs. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.24.1.3.1.1 |