wtIpWatcher-24VAlarmPollingRate
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.53
Object
column
mandatory
r/w
Integer32
Time in seconds.
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.53- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtIpWatcher-24VAlarmEntry
- Table
- wtIpWatcher-24VAlarmTable
- Siblings
- 48
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtIpWatcher-24VAlarmSnmpManagerIP mandatory IP address of the SNMP Manager to which the Webio device should send SNMP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.10 |
| wtIpWatcher-24VAlarmSnmpTrapText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.11 |
| wtIpWatcher-24VAlarmUdpIpAddr mandatory IP address of the UDP listener to which the Webio device should send UDP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.12 |
| wtIpWatcher-24VAlarmUdpPort mandatory Port number of the UDP listener to which the Webio device should send UDP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.13 |
| wtIpWatcher-24VAlarmUdpText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.14 |
| wtIpWatcher-24VAlarmTcpIpAddr mandatory IP address of the TCP listener to which the Webio device should send TCP traps. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.15 |
| wtIpWatcher-24VAlarmTcpPort mandatory Port number of the TCP listener to which the Webio device should send TCP traps. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.16 |
| wtIpWatcher-24VAlarmTcpText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.17 |
| wtIpWatcher-24VAlarmSyslogIpAddr mandatory IP address of the syslog server to which the Webio device should send syslog messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.18 |
| wtIpWatcher-24VAlarmSyslogPort mandatory Port number of the syslog server to which the Webio device should send syslog messages. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.19 |
| wtIpWatcher-24VAlarmSyslogText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.20 |
| wtIpWatcher-24VAlarmFtpDataPort mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.21 |
| wtIpWatcher-24VAlarmFtpFileName mandatory Name of the file including path informations. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.22 |
| wtIpWatcher-24VAlarmFtpText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.23 |
| wtIpWatcher-24VAlarmFtpOption mandatory Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.24 |
| wtIpWatcher-24VAlarmTimerCron mandatory This entry contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger a message, weekday and day of month
are… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.25 |
| wtIpWatcher-24VAlarmMailReleaseSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.26 |
| wtIpWatcher-24VAlarmMailReleaseText mandatory Release Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.27 |
| wtIpWatcher-24VAlarmSnmpTrapReleaseText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.28 |
| wtIpWatcher-24VAlarmUdpReleaseText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.29 |
| wtIpWatcher-24VAlarmTcpReleaseText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.30 |
| wtIpWatcher-24VAlarmSyslogReleaseText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.31 |
| wtIpWatcher-24VAlarmFtpReleaseText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.32 |
| wtIpWatcher-24VAlarmName mandatory Name of the alarm. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.33 |
| wtIpWatcher-24VAlarmGlobalEnable mandatory Binary coded alarm activation:
Die OCTETS werden bitweise interpretiert.
Bit 0 entspricht dem LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.34 |
| wtIpWatcher-24VAlarmCounterClear mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : Cou… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.35 |
| wtIpWatcher-24VAlarmAckEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 2-7: unused
Bit 1 : Sof… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.36 |
| wtIpWatcher-24VAlarmAckPort mandatory Number of the input, which clears the alarm (1-6). | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.37 |
| wtIpWatcher-24VAlarmSetPort mandatory Number of the output, which will be set by this alarm (1-6).
The configuration of pulse mode and polarity defined in the port output section is used. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.38 |
| wtIpWatcher-24VAlarmMailTrgClearSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.39 |
| wtIpWatcher-24VAlarmMailTrgClearText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.40 |
| wtIpWatcher-24VAlarmSnmpTrapTrgClearText mandatory This text appears in the trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.41 |
| wtIpWatcher-24VAlarmUdpTrgClearText mandatory This text appears in the UDP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.42 |
| wtIpWatcher-24VAlarmTcpTrgClearText mandatory This text appears in the TCP trap body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.43 |
| wtIpWatcher-24VAlarmSyslogTrgClearText mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.44 |
| wtIpWatcher-24VAlarmFtpTrgClearText mandatory Message text to store on the FTP server. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.45 |
| wtIpWatcher-24VAlarmMailTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.46 |
| wtIpWatcher-24VAlarmSnmpTrapTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.47 |
| wtIpWatcher-24VAlarmUdpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.48 |
| wtIpWatcher-24VAlarmTcpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.49 |
| wtIpWatcher-24VAlarmInterval mandatory Send interval for alarm messages. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.5 |
| wtIpWatcher-24VAlarmSyslogTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.50 |
| wtIpWatcher-24VAlarmFtpTrapTxEnable mandatory Binary coded options:
The OCTETS are interpreted bit-by-bit.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 4-7: unused
Bit 3 : Ala… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.51 |
| wtIpWatcher-24VAlarmTriggerCount mandatory Alarm will be send if the trigger condition occours TriggerCount times. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.52 |
| wtIpWatcher-24VAlarmEnable mandatory Binary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: UDP enable
Bit 3: Send inputs to pendi… | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.6 |
| wtIpWatcher-24VAlarmMailAddr mandatory E-Mail address for sending the alarm mail to. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.7 |
| wtIpWatcher-24VAlarmMailSubject mandatory Subject line for alarm mail. | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.8 |
| wtIpWatcher-24VAlarmMailText mandatory Alarm mail text:
States of the Webio device can be included by using special tags.
Please refer to the respective Webio manual | column | OctetString | .1.3.6.1.4.1.5040.1.2.32.3.1.5.3.1.9 |