wtWebioEA2x2PortInputMode
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.3
Object
column
mandatory
r/w
OctetString
Binary coded modes: Selecting short pulse detection enable by setting the corresponding bit to 1 enables interrupt support for counting. Only positive edges are accepted as trigger source. The maximum counting frequenz equals 2000 Hz. This mode is available for inputs 0-3 only. Selecting counter clear on read by setting the corresponding bit to 1 enables the corresponding counter to be cleared automatically every time it is read, except HTTP reading with user rights. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. Selection for input 0-1: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 4-7: unused Bit 3 : Bidirectional counter enable Bit 2 : Counter clear on read Bit 1 : Change detection enable (default) Bit 0 : Short Pulse detection enable
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.13.3.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- wtWebioEA2x2InputPortEntry
- Table
- wtWebioEA2x2InputPortTable
- Siblings
- 5
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebioEA2x2PortInputName mandatory Name of the input. | column | OctetString | .1.3.6.1.4.1.5040.1.2.13.3.2.1.1.1 |
| wtWebioEA2x2PortInputText mandatory Description of the input. | column | OctetString | .1.3.6.1.4.1.5040.1.2.13.3.2.1.1.2 |
| wtWebioEA2x2PortInputFilter mandatory Pulses with a duration shorter than here specified (duration in 1/1000 sec),
are ignored. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.13.3.2.1.1.4 |
| wtWebioEA2x2PortInputBicountPulsePolarity mandatory This value defines the polarity of the input pulse.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4:
Bit 0 : negative polarity
Bit 1 : positive polarity
Bit 2-… | column | OctetString | .1.3.6.1.4.1.5040.1.2.13.3.2.1.1.5 |
| wtWebioEA2x2PortInputBicountInactivTimeout mandatory Pulse chains with a duration shorter than here specified (in 1/10 sek),
are ignored. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.13.3.2.1.1.6 |