wtWebioEA2x2ERP-24VBinaryEntry
Webio-Digital-MIB-US ·
.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1
Object
row
mandatory
Binary properties.
Context
- MIB
- Webio-Digital-MIB-US
- OID
.1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1- Type
- row
- Status
- mandatory
- Parent
- wtWebioEA2x2ERP-24VBinaryTable
- Table
- wtWebioEA2x2ERP-24VBinaryTable
- Children
- 22
Syntax
No syntax metadata recorded.
Values & Constraints
Object Constraints
range: 12-12
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtWebioEA2x2ERP-24VBinaryOperationMode mandatory Selection of the operation mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bi… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.1 |
| wtWebioEA2x2ERP-24VBinaryTcpClientInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless ev… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.10 |
| wtWebioEA2x2ERP-24VBinaryTcpClientInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends
data to the configured application. A interval of zero stopps the
periodical sending. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.11 |
| wtWebioEA2x2ERP-24VBinaryTcpClientApplicationMode mandatory Selection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.12 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerLocalPort mandatory Local UDP port for data exchange in this peer to peer mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual). | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.13 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerRemotePort mandatory Port number of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote por… | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.14 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerRemoteIpAddr mandatory Ip address of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote devi… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.15 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless ev… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.16 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerInterval mandatory Configurable interval with a 100ms base, in which the Webio device sends
data to the configured remote device. A interval of zero stopps the
periodical sending. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.17 |
| wtWebioEA2x2ERP-24VBinaryUdpPeerApplicationMode mandatory Selection of the application mode:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.18 |
| wtWebioEA2x2ERP-24VBinaryConnectedPort mandatory Port number of the remote device, after connection has been established.
In case of no connection or missing port informations a zero will be read. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.19 |
| wtWebioEA2x2ERP-24VBinaryTcpServerLocalPort mandatory Local TCP port for data exchange in this server mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual). | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.2 |
| wtWebioEA2x2ERP-24VBinaryConnectedIpAddr mandatory IP address of the remote device, after connection has been established.
In case of no connection or missing port informations 0.0.0.0 will be read. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.20 |
| wtWebioEA2x2ERP-24VBinaryTcpServerClientHttpPort mandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs
status informations will be send to this port.
Not used at mode Compatible 50xxx. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.21 |
| wtWebioEA2x2ERP-24VBinaryTcpClientServerHttpPort mandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode
Box2Box connection status informations will be exchanged through this port. | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.22 |
| wtWebioEA2x2ERP-24VBinaryTcpServerInputTrigger mandatory Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless ev… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.3 |
| wtWebioEA2x2ERP-24VBinaryTcpServerApplicationMode mandatory Selection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 4-7: unused
… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.4 |
| wtWebioEA2x2ERP-24VBinaryTcpClientLocalPort mandatory Local TCP port for data exchange in this client mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual). | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.5 |
| wtWebioEA2x2ERP-24VBinaryTcpClientServerPort mandatory Port number of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server port to ze… | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.6 |
| wtWebioEA2x2ERP-24VBinaryTcpClientServerIpAddr mandatory Ip address of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server IP address … | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.7 |
| wtWebioEA2x2ERP-24VBinaryTcpClientServerPassword mandatory Building a connection may be protected by the
administrator password of the server. Enter the server password
to establish the connection, if a server administrator password
exis… | column | OctetString | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.8 |
| wtWebioEA2x2ERP-24VBinaryTcpClientInactivity mandatory Connection timeout in 100ms. If no data are exchanged within the specified
time, the device closes the connection to the server.
The value 0 deactivates the timer. Using the Box… | column | Integer32 | .1.3.6.1.4.1.5040.1.2.31.3.1.3.6.3.1.9 |