HUAWEI-VDSL2-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

718

vdsl2LineTable

table

.1.3.6.1.4.1.2011.6.115.1.1.1 · 1 row entry · 53 columns

Open in standard view

The table vdsl2LineTable contains configuration,
command and status parameters of the VDSL2 line.
The index of this table is ifIndex.

vdsl2LineEntry entry .1.3.6.1.4.1.2011.6.115.1.1.1.1

The table vdsl2LineTable contains configuration,
command and status parameters of the VDSL2 line.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

vdsl2LineCnfgTemplate

The value of this object identifies the row in the VDSL2 Line
Configuration Templates Table, (Vdsl2ConfTemplatesTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.1

vdsl2LineAlarmCnfgTemplate

The value of this object identifies the row in the VDSL2 Line
Alarm Configuration Template Table,
(vdsl2LineAlarmConfTemplateTable), which applies to this VDSL2
line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.2

vdsl2LineCmndConfPmsf

Power management state forced. Defines the line states to be
forced by the near-end xTU on this line.
Options:
1. l3toL0(0) - Force the line to transition from the L3
idle state to the L0 full-…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ConfPmsForcer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ConfPmsForce Enumeration

Type Values:

-1	invalidValue
0	l3toL0
2	l0toL2
3	l0orL2toL3

.1.3.6.1.4.1.2011.6.115.1.1.1.1.3

vdsl2LineCmndConfLdsf

Loop diagnostics mode forced (LDSF). Defines whether the line
should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to loop
diagnostics initiated by the far-end xTU.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineLdsfr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineLdsf Enumeration

Type Values:

-1	invalidValue
0	inhibit
1	force

.1.3.6.1.4.1.2011.6.115.1.1.1.1.4

vdsl2LineCmndConfLdsfFailReason

The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line.
Options:
1. none(1) - The default value in case LDSF was never
requested for t…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LdsfResult

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LdsfResult Enumeration

Type Values:

1	none
2	success
3	inProgress
4	unsupported
5	cannotRun
6	aborted
7	failed
8	illegalMode
9	adminUp
10	tableFull
11	noResources

.1.3.6.1.4.1.2011.6.115.1.1.1.1.5

vdsl2LineCmndAutomodeColdStart

Automode cold start forced. This parameter is defined
in order to improve testing of the performance of ATUs
supporting automode when it is enabled in the MIB.
Change the value of this parameter to 'true' indicates
a ch…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.1.1.1.6

vdsl2LineStatusXtuTransSys

The xTU Transmission System (XTS) in use.
This parameter may be derived from the handshaking procedures
defined in Recommendation G.994.1. The invalid value is 4294967295.
If data on the port is invalid or no data is g…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.7

vdsl2LineStatusPwrMngState

The current power management state.
Options:
1. L0 - Synchronized and full transmission
2. L1 - Low Power with reduced net data rate
3. L2 - Low Power with reduced net data rate
4. L3 - No power
The various possibl…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PowerMngState

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PowerMngState Enumeration

Type Values:

-1	invalidValue
0	l0
1	l1
2	l2
3	l3

.1.3.6.1.4.1.2011.6.115.1.1.1.1.8

vdsl2LineStatusInitResult

Indicates the result of the last full initialization performed
on the line.
Options:
1. noFail (0) - Successful initialization
2. configError (1) - Configuration failure
3. configNotF…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2InitResult

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2InitResult Enumeration

Type Values:

-1	invalidValue
0	noFail
1	configError
2	configNotFeasible
3	commFail
4	noPeerXtu
5	otherCause
6	ginpNotSelected

.1.3.6.1.4.1.2011.6.115.1.1.1.1.9

vdsl2LineStatusLastStateDs

The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line. States are per the specific VDSL type
and are counted from 0 (if G.994.1 is used) o…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LastTransmittedState

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LastTransmittedState Enumeration

Type Values:

-1	invalidValue
0	xtucG9941
1	xtucQuiet1
2	xtucComb1
3	xtucQuiet2
4	xtucComb2
5	xtucIcomb1
6	xtucLineprob
7	xtucQuiet3
8	xtucComb3
9	xtucIComb2
10	xtucMsgfmt
11	xtucMsgpcb
12	xtucQuiet4
13	xtucReverb1
14	xtucTref1
15	xtucReverb2
16	xtucEct
17	xtucReverb3
18	xtucTref2
19	xtucReverb4
20	xtucSegue1
21	xtucMsg1
22	xtucReverb5
23	xtucSegue2
24	xtucMedley
25	xtucExchmarker
26	xtucMsg2
27	xtucReverb6
28	xtucSegue3
29	xtucParams
30	xtucReverb7
31	xtucSegue4
32	xtucShowtime
100	xturG9941
101	xturQuiet1
102	xturComb1
103	xturQuiet2
104	xturComb2
105	xturIcomb1
106	xturLineprob
107	xturQuiet3
108	xturComb3
109	xturIcomb2
110	xturMsgfmt
111	xturMsgpcb
112	xturReverb1
113	xturQuiet4
114	xturReverb2
115	xturQuiet5
116	xturReverb3
117	xturEct
118	xturReverb4
119	xturSegue1
120	xturReverb5
121	xturSegue2
122	xturMsg1
123	xturMedley
124	xturExchmarker
125	xturMsg2
126	xturReverb6
127	xturSegue3
128	xturParams
129	xturReverb7
130	xturSegue4
131	xturShowtime

.1.3.6.1.4.1.2011.6.115.1.1.1.1.10

vdsl2LineStatusLastStateUs

The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line. States are per the specific VDSL type and are
counted from 0 (if G.994.1 is used) or…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LastTransmittedState

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LastTransmittedState Enumeration

Type Values:

-1	invalidValue
0	xtucG9941
1	xtucQuiet1
2	xtucComb1
3	xtucQuiet2
4	xtucComb2
5	xtucIcomb1
6	xtucLineprob
7	xtucQuiet3
8	xtucComb3
9	xtucIComb2
10	xtucMsgfmt
11	xtucMsgpcb
12	xtucQuiet4
13	xtucReverb1
14	xtucTref1
15	xtucReverb2
16	xtucEct
17	xtucReverb3
18	xtucTref2
19	xtucReverb4
20	xtucSegue1
21	xtucMsg1
22	xtucReverb5
23	xtucSegue2
24	xtucMedley
25	xtucExchmarker
26	xtucMsg2
27	xtucReverb6
28	xtucSegue3
29	xtucParams
30	xtucReverb7
31	xtucSegue4
32	xtucShowtime
100	xturG9941
101	xturQuiet1
102	xturComb1
103	xturQuiet2
104	xturComb2
105	xturIcomb1
106	xturLineprob
107	xturQuiet3
108	xturComb3
109	xturIcomb2
110	xturMsgfmt
111	xturMsgpcb
112	xturReverb1
113	xturQuiet4
114	xturReverb2
115	xturQuiet5
116	xturReverb3
117	xturEct
118	xturReverb4
119	xturSegue1
120	xturReverb5
121	xturSegue2
122	xturMsg1
123	xturMedley
124	xturExchmarker
125	xturMsg2
126	xturReverb6
127	xturSegue3
128	xturParams
129	xturReverb7
130	xturSegue4
131	xturShowtime

.1.3.6.1.4.1.2011.6.115.1.1.1.1.11

vdsl2LineStatusXtur

Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions. The various bit
positions are: noFailure(0), lossOfFraming(1),
lossOfSignal(2), lossOfPower(3),
initFailure(4) - never…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineStatus

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineStatus Bits

Type Values:

0	noDefect
1	lossOfFraming
2	lossOfSignal
3	lossOfPower
4	initFailure

.1.3.6.1.4.1.2011.6.115.1.1.1.1.12

vdsl2LineStatusXtuc

Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions. This BITS structure can
report the following failures:
1. noDefect (0) - This bit position positively reports
…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineStatus

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LineStatus Bits

Type Values:

0	noDefect
1	lossOfFraming
2	lossOfSignal
3	lossOfPower
4	initFailure

.1.3.6.1.4.1.2011.6.115.1.1.1.1.13

vdsl2LineStatusLnAttenDs

The measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all
sub-carriers during diagnostics mode and initialization. It
ranges from 0 to 1270 units of 0.1 dB (…

0.1 dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.14

vdsl2LineStatusLnAttenUs

The measured difference in the total power transmitted by the
xTU-R and the total power received by the xTU-C over all sub-
carriers during diagnostics mode and initialization.
It ranges from 0 to 1270 units of 0.1 dB (…

0.1 dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.15

vdsl2LineStatusSigAttenDs

The measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 1…

0.1 dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.16

vdsl2LineStatusSigAttenUs

The measured difference in the total power transmitted by the
xTU-R and the total power received by the xTU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 1…

0.1 dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.17

vdsl2LineStatusSnrMarginDs

Downstream SNR Margin is the maximum increase in dB of the
noise power received at the xTU-R, such that the BER
requirements are met for all downstream bearer channels. It
ranges from -640 to 630 units of 0.1 dB (Physi…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.18

vdsl2LineStatusSnrMarginUs

Upstream SNR Margin is the maximum increase in dB of the noise
power received at the xTU-C, such that the BER requirements
are met for all downstream bearer channels. It ranges from
-640 to 630 units of 0.1 dB (Physica…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.19

vdsl2LineStatusAttainableRateDs

Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in bit/s.
The invalid value is 4294967295. If data on the port is…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.20

vdsl2LineStatusAttainableRateUs

Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s.
The invalid value is 4294967295. If data on the port is inv…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.21

vdsl2LineStatusActPsdDs

Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz). A value o…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.22

vdsl2LineStatusActPsdUs

Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz). A value of 0x7FF…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.23

vdsl2LineStatusActAtpDs

Actual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical val…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.24

vdsl2LineStatusActAtpUs

Actual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical value…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.25

vdsl2LineBandPlan

Band contains a series of subcarriers.
The first octet is the number of bands. Other octets describe the info of
each band.
Each band info is a pair of values occupying 4 octets with the
following structure:
Fir…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2BandPlan

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2BandPlan OctetString

Type Constraints:
range: 0..96

.1.3.6.1.4.1.2011.6.115.1.1.1.1.26

vdsl2LinePsdMaskClassSelection

The sub class of VDSL2 PSD Mask.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2TIPsdClassMask

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2TIPsdClassMask Enumeration

Type Values:

-1	invalidValue
1	none
2	a998B997M1cC998
3	b997M1x
4	b997M2x
5	b998M1x
6	b998M2x

.1.3.6.1.4.1.2011.6.115.1.1.1.1.27

vdsl2LineCurrentVdsl2Profile

This configuration parameter contains the G.993.2 profiles
to be allowed by the near-end xTU on this line.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfiles

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfiles Enumeration

Type Values:

-1	invalidValue
1	profile8a
2	profile8b
3	profile8c
4	profile8d
5	profile12a
6	profile12b
7	profile17a
8	profile30a

.1.3.6.1.4.1.2011.6.115.1.1.1.1.28

vdsl2LineCnfgServiceProf

The value of this object identifies the row in the VDSL2 Line
Configuration Service Profile Table, (vdsl2ServProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.29

vdsl2LineCnfgSpectrumProf

The value of this object identifies the row in the VDSL2 Line
Configuration Spectrum Profile Table, (vdsl2SpectrumProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.30

vdsl2LineCnfgDpboProf

The value of this object identifies the row in the VDSL2 Line
Configuration Dpbo Profile Table, (vdsl2DpboProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.31

vdsl2LineCnfgUpboProf

The value of this object identifies the row in the VDSL2 Line
Configuration Upbo Profile Table, (vdsl2UpboProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.32

vdsl2LineCnfgNoiseMarginProf

The value of this object identifies the row in the VDSL2 Line
Configuration Noise Margin Profile Table, (vdsl2NoiseMarginProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.33

vdsl2LineCnfgDelayINPProf

The value of this object identifies the row in the VDSL2 Line
Configuration Delay-INP Profile Table, (vdsl2DelayInpProfTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.34

vdsl2UpboProfKl0CpeVal

The actual value of KL0_CPE parameter,it ranges
from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295.
If data on the port cannot be queried, data on the port is invalid,
or no data is generated on the port …

0.1dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.35

vdsl2LineStatusCodingGainDs

The actual value of Coding gain downstream parameter,it ranges
from 0 to 16 units of 0.5 dB. The invalid value is 4294967295.
If data on the port cannot be queried, data on the port is invalid,
or no data is generated…

0.5dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.36

vdsl2LineStatusCodingGainUs

The actual value of Coding gain upstream parameter,it ranges
from 0 to 16 units of 0.5 dB. The invalid value is 4294967295.
If data on the port cannot be queried, data on the port is invalid,
or no data is generated o…

0.5dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.37

vdsl2LineStatusPcbDs

The actual value of power cut back downstream parameter,
it ranges from 0 to 40 units of 1 dB. The invalid value
is 4294967295. If data on the port cannot be queried,
data on the port is invalid, or no data is generat…

1dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.38

hwvdslDlmDsmprofile

The value of this object identifies the row
in the DLM/DSM Profile Table,
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.1.1.1.39

hwvdsl2LineActmode

Actived mode after training between co and cpe.
Options:
1. ADSL(1) - ETSI,T1.413 G992.1,G992.2
2. ADSL2(2) - G992.3,G992.4
3. ADSL2PLUS(3) - G992.5
4. VDSL(4) - G993.1
5. VDSL2(5) …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Actmode

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Actmode Enumeration

Type Values:

-1	invalidValue
1	adsl
2	adsl2
3	adsl2plus
4	vdsl
5	vdsl2

.1.3.6.1.4.1.2011.6.115.1.1.1.1.40

vdsl2UpboProfKl0CoVal

The actual value of KL0_CO parameter, it ranges
from 0 to 1280 units of 0.1 dB. The invalid value
is 4294967295. If data on the port cannot be queried,
data on the port is invalid, or no data is generated
on the port…

0.1dBSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.41

vdsl2LineStatusRtxUsedDs

This parameter specifies whether G.998.4 retransmission
is used in downstream.
Options:
1. rtxInuse(1) - RTX in use
2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MO…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2StatusRtxUsed

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2StatusRtxUsed Enumeration

Type Values:

-1	invalidValue
1	rtxInuse
2	rtxUnusedModeForbidden
3	rtxUnusedNotSupportedXtuc
4	rtxUnusedNotSupportedXtur
5	rtxUnusedNotSupportedXtucAndXtur

.1.3.6.1.4.1.2011.6.115.1.1.1.1.42

vdsl2LineStatusRtxUsedUs

This parameter specifies whether G.998.4 retransmission
is used in upstream.
Options:
1. rtxInuse(1) - RTX in use
2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MOD…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2StatusRtxUsed

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2StatusRtxUsed Enumeration

Type Values:

-1	invalidValue
1	rtxInuse
2	rtxUnusedModeForbidden
3	rtxUnusedNotSupportedXtuc
4	rtxUnusedNotSupportedXtur
5	rtxUnusedNotSupportedXtucAndXtur

.1.3.6.1.4.1.2011.6.115.1.1.1.1.43

vdsl2LineStatusLastRetrainInfo

Indicates the last retrained information performed on the line.
Options:
1. none(1) - No record is available …

Enumeration

Enumerated Values:

1	none
2	cpe-l3-trigger
3	lom-us-trigger-dra
4	lom-ds-trigger-dra
5	cpe-never-answer-oam
6	cpe-no-more-answer-oam
7	persistent-ncd-us
8	persistent-ncd-ds
9	persistent-lcd-us
10	persistent-lcd-ds
11	l2-problem-co-drop
12	l2-problem-cpe-drop
13	bitswap-refused-us-co-drop
14	bitswap-refused-us-cpe-drop
15	channel-change-us-co-drop
16	channel-change-us-cpe-drop
17	noise-increase-us-co-drop
18	noise-increase-us-cpe-drop
19	bitswap-refused-ds-co-drop
20	bitswap-refused-ds-cpe-drop
21	channel-change-ds-co-drop
22	channel-change-ds-cpe-drop
23	noise-increase-ds-co-drop
24	noise-increase-ds-cpe-drop
25	lom-us-co-drop
26	lom-us-cpe-drop
27	lom-ds-co-drop
28	lom-ds-cpe-drop
29	sra-problem-us-co-drop
30	sra-problem-us-cpe-drop
31	sra-failed-us-co-drop
32	sra-failed-us-cpe-drop
33	sra-problem-ds-co-drop
34	sra-problem-ds-cpe-drop
35	sra-rejected-ds-co-drop
36	sra-rejected-ds-cpe-drop
37	bitswap-problem-us-co-drop
38	bitswap-problem-us-cpe-drop
39	bitswap-failed-us-co-drop
40	bitswap-failed-us-cpe-drop
41	bitswap-problem-ds-co-drop
42	bitswap-problem-ds-cpe-drop
43	bitswap-rejected-ds-co-drop
44	bitswap-rejected-ds-cpe-drop
45	cpe-switched-off
46	cpe-lost
47	co-reset
48	co-stop
49	unknown

.1.3.6.1.4.1.2011.6.115.1.1.1.1.44

vdsl2UpboRxThreshDs

This parameter reports the downstream received signal level threshold value
used in the Alternative Electrical Length Estimation method (ELE-M1).
This parameter represents an offset from -100 dB,
and ranges from -64 …

dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.45

vdsl2UpboRxThreshUs

This parameter reports the upstream received signal level threshold value
used in the Alternative Electrical Length Estimation method (ELE-M1).
This parameter represents an offset from -100 dB,
and ranges from -64 dB…

dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.1.1.1.46

hwvdsl2LineStatusLineRateDs

The actual line rate downstream. The invalid value is 4294967295.
If data on the port cannot be queried, data on the port is invalid,
or no data is generated on the port because the port has not been
activated, the i…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.47

hwvdsl2LineStatusLineRateUs

The actual line rate upstream. The invalid value is 4294967295.
If data on the port cannot be queried, data on the port is invalid,
or no data is generated on the port because the port has not been
activated, the inv…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.48

hwvdsl2LineSplitterMode

This parameter indicates which mode will be applied to the port
splitter .The valid values for the splitter mode are 1 and 2.
Options:
1. connect (1) - Splitter mode is connect
2. bypass (2) - Split…

Enumerationr/w

Enumerated Values:

1	connect
2	bypass

.1.3.6.1.4.1.2011.6.115.1.1.1.1.49

hwvdsl2LineBackup

This parameter indicates whether the port backup is enabled.
Options:
1. enable(1) - Enable the port backup.
2. disable(2) - Disable the port backup.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.1.1.1.50

hwvdsl2LineBackupPort

This parameter indicates the backup port ifindex. If data on the port is invalid or no data is
generated on the port, the port is not backed up.
The invalid value is 4294967295.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.1.1.1.51

hwvdsl2LinePhyRcontrol

This parameter indicates whether the PHY-R retransmission is enabling.
In TR165 mode, the H80BVDPM board should be enabled when it works as ADSL mode.
Options:
1. enable(1) - Enable the PHY-R retransmission of…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.1.1.1.52

hwvdsl2LineStatusActPsdLimitMask

(LIMITMASK).
This parameter contains the actual G.993.2 limit PSD masks selected during showtime.
Options:
1. annexA998-D-32(1) - D-32
2. annexA998-D-64(2) - D-64
3. annexB997-M1c-A-7(…

Enumeration

Enumerated Values:

-1	invalidValue
1	annexA998-D-32
2	annexA998-D-64
3	annexB997-M1c-A-7
4	annexB997-M1x-M-8
5	annexB997-M1x-M
6	annexB997-M2x-M-8
7	annexB997-M2x-A
8	annexB997-M2x-M
9	annexB998-M1x-A
10	annexB998-M1x-B
11	annexB998-M1x-NUS0
12	annexB998-M2x-A
13	annexB998-M2x-M
14	annexB998-M2x-B
15	annexB998-M2x-NUS0
16	annexBHPE17-M1-NUS0
17	annexBHPE30-M1-NUS0
18	annexB997E17-M2x-A
19	annexB997E30-M2x-NUS0
20	annexB998E17-M2x-NUS0
21	annexB998E17-M2x-NUS0-M
22	annexB998ADE17-M2x-NUS0-M
23	annexB998ADE17-M2x-B
24	annexB998E30-M2x-NUS0
25	annexB998E30-M2x-NUS0-M
26	annexB998ADE30-M2x-NUS0-M
27	annexB998ADE17-M2x-A
28	annexB998ADE30-M2x-NUS0-A
29	annexA998-D-48
30	annexA998-D-128
31	annexB998ADE17-M2x-M
32	annexB998E17-M2x-A

.1.3.6.1.4.1.2011.6.115.1.1.1.1.53

vdsl2ChannelStatusTable

table

.1.3.6.1.4.1.2011.6.115.1.2.1 · 1 row entry · 20 columns

Open in standard view

The table vdsl2ChannelStatusTable contains status
parameters of VDSL2 channel. 
The indexes of this table are ifIndex and vdsl2ChStatusUnit.

vdsl2ChannelStatusEntry entry .1.3.6.1.4.1.2011.6.115.1.2.1.1

The table vdsl2ChannelStatusTable contains status
parameters of VDSL2 channel.
The indexes of this entry are ifIndex and vdsl2ChStatusUnit.

Indexes

IF-MIBifIndex vdsl2ChStatusUnit

Column Syntax OID

vdsl2ChStatusUnit

The termination unit xTU-C(1) or xTU-R(2).

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.2.1.1.1

vdsl2ChStatusChannelNum

Provides the bearer channel number associated with this
row (i.e., the channel ifIndex).
This enables determining the channel configuration profile
and the channel thresholds profile applicable for this
bearer channel.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.2

vdsl2ChStatusActDataRate

If retransmission is not used in a given transmit direction,
this parameter reports the actual net data rate at which the
bearer channel is operating in L0 power management state, and
in L1 or L2 states, the paramete…

bits/secondUnsigned32

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.2.1.1.3

vdsl2ChStatusPrevDataRate

If retransmission is not used in a given transmit direction, this
parameter reports the previous net data rate the bearer channel
was operating at just before the latest net data rate change event
occurred, excluding…

bits/secondUnsigned32

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.2.1.1.4

vdsl2ChStatusActDelay

If retransmission is not used in a given transmit direction, this
parameter is the actual one-way interleaving delay introduced by
the PMS-TC excluding delay in L1 and L2 state. In L1 and L2 state,
the parameter cont…

millisecondsUnsigned32

Constraints:
range: 0-8176

.1.3.6.1.4.1.2011.6.115.1.2.1.1.5

vdsl2ChStatusAtmStatus

Indicates current state (existing failures) of the VDSL
channel in case its Data Path is ATM. This is a bit-map of
possible conditions.
Options:
1. noDefect(0) - This bit position positively
…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChAtmStatus

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChAtmStatus Bits

Type Values:

0	noDefect
1	noCellDelineation
2	lossOfCellDelineation

.1.3.6.1.4.1.2011.6.115.1.2.1.1.6

vdsl2ChStatusPtmStatus

Indicates current state (existing failures) of the VDSL
channel in case its Data Path is PTM. This is a bit-map of
possible conditions.
Options:
1. noFailure(0) - No failure
2. outOfSync (1) - Out of synchronizati…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus Bits

Type Values:

0	noDefect
1	outOfSync

.1.3.6.1.4.1.2011.6.115.1.2.1.1.7

vdsl2ChStatusINP

If retransmission is not used in a given transmit direction, this
parameter reports the actual impulse noise protection (INP) on the
bearer channel in the L0 state. In the L1 or L2 state, the parameter
contains the I…

0.1 DMT symbolUnsigned32

Constraints:
range: 0-254

.1.3.6.1.4.1.2011.6.115.1.2.1.1.8

vdsl2ChStatusRSRedundancy

The actual number of Reed-Solomon redundancy
bytes per codeword used in the latency path
in which the bearer channel is transported.
The value is coded in bytes.
The value 0 indicates no Reed-Solomon coding.
The inva…

byteUnsigned32

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.115.1.2.1.1.9

vdsl2ChStatusRSSymbols

The DMT Symbol number per codeword used in
the latency path in which the bearer channel
is transported. The invalid value is 4294967295.
If data on the port is invalid or no data is generated
on the port because the …

0.01 DMT symbolSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.10

vdsl2ChStatusInterDepth

The actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported.
The value ranges from 1 to 4096 by step of 1.
The value 1 indicates no interleaving. The invalid
value is 42…

Unsigned32

Constraints:
range: 1-4096

.1.3.6.1.4.1.2011.6.115.1.2.1.1.11

vdsl2ChStatusSymbolLength

The actual number of bits per symbol assigned
to the latency path in which the bearer channel
is transported.
This value does not include trellis overhead. The invalid
value is 4294967295. If data on the port is inva…

bitUnsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.115.1.2.1.1.12

vdsl2ChStatusRSSize

The actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported. The invalid value is 4294967295.
If data on the port is invalid or no data is
generated on the port because …

byteUnsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.2.1.1.13

vdsl2ChStatusInterBlockLength

The actual block length of the interleaver
used in the latency path in which the bearer
channel is transported. The invalid value is 4294967295.
If data on the port is invalid or no data is generated
on the port bec…

byteUnsigned32

Constraints:
range: 4-255

.1.3.6.1.4.1.2011.6.115.1.2.1.1.14

vdsl2ChStatusLPATH

The index of the actual
latency path in which the bearer is transported.
The invalid value is 4294967295. If data on the port
is invalid or no data is generated on the port because
the port has not been activated, th…

Unsigned32

Constraints:
range: 0-3

.1.3.6.1.4.1.2011.6.115.1.2.1.1.15

vdsl2ChStatusPhyRrrcBits

The bits in the channel that used to retransmission.
The invalid value is 4294967295. If data on the port cannot
be queried, data on the port is invalid, or no data is
generated on the port because the port has not be…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.16

vdsl2ChStatusPhyRtxQueue

Queues in send buffer used for retransmission.
The invalid value is 4294967295. If data on the port
cannot be queried, data on the port is invalid, or no
data is generated on the port because the port has
not been ac…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.17

vdsl2ChStatusActNetDataRate

In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating.
In L2 state, this parameter contains the Net Data Rate in the previous L0 state.
This parameter is optional if G.998.4 re…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.18

vdsl2ChStatusActINPAgainstREIN

If retransmission is used in a given transmit direction,
this parameter reports the actual impulse noise protection (INP)
against REIN (under specific conditions detailed in G.998.4)
on the bearer channel in the L0 s…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.19

hwvdsl2ChStatusUnlimitedVersionEtru

The unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR.
This value is specified in G.998.4 (G.INP).

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.1.1.20

vdsl2PrivSCStatusTable

table

.1.3.6.1.4.1.2011.6.115.1.2.2 · 1 row entry · 5 columns

Open in standard view

The table vdsl2PrivSCStatusTable contains status parameters
of VDSL2 sub-carriers. 
The indexes of this table are ifIndex and vdsl2PrivSCStatusDirection.

vdsl2PrivSCStatusEntry entry .1.3.6.1.4.1.2011.6.115.1.2.2.1

The table vdsl2PrivSCStatusTable contains status parameters
of VDSL2 sub-carriers.
The indexes of this entry are ifIndex and vdsl2PrivSCStatusDirection.

Indexes

IF-MIBifIndex vdsl2PrivSCStatusDirection

Column Syntax OID

vdsl2PrivSCStatusDirection

The direction of the sub-carrier either
upstream or downstream.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction Enumeration

Type Values:

1	upstream
2	downstream

.1.3.6.1.4.1.2011.6.115.1.2.2.1.1

vdsl2PrivSCStatusMtime

SNR Measurement Time. The number of symbols used to
measure the SNR values on the respective transmission
direction. It should correspond to the value specified in the
recommendation (e.g., the number of symbols in 1 …

symbolsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.2.1.2

vdsl2PrivSCStatusSnr

The SNR Margin per sub-carrier, expressing the ratio between
the received signal power and received noise power per
subscriber. It is an array of 4096 bytes, designed for
supporting up to 4096 sub-carriers.
The number …

OctetString

Constraints:
range: 0-4096

.1.3.6.1.4.1.2011.6.115.1.2.2.1.3

vdsl2PrivSCStatusBitsAlloc

The bits allocation per sub-carrier. An array of 2048 bytes,
designed for supporting up to 4096 sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depen…

bitsOctetString

Constraints:
range: 0-2048

.1.3.6.1.4.1.2011.6.115.1.2.2.1.4

vdsl2PrivSCStatusGainAlloc

The gain allocation per sub-carrier. An array of 8192 bytes,
designed for supporting up to 4096 sub-carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depend…

OctetString

Constraints:
range: 0-8192

.1.3.6.1.4.1.2011.6.115.1.2.2.1.5

vdsl2SCStatusTable

table

.1.3.6.1.4.1.2011.6.115.1.2.3 · 1 row entry · 14 columns

Open in standard view

The table vdsl2SCStatusTable contains
sub-carrier status parameters for VDSL2/ADSL/ADSL2
and ADSL2+ that DO NOT refer to specific sub-carriers.
In addition, the table contains parameters
that provide information about the size of parameters
in vdsl2SCStatusSegmentTable.  This table contains live data
from equipment. The indexes of this table are ifIndex and 
vdsl2SCStatusDirection.

vdsl2SCStatusEntry entry .1.3.6.1.4.1.2011.6.115.1.2.3.1

The table vdsl2SCStatusTable contains
sub-carrier status parameters for VDSL2/ADSL/ADSL2
and ADSL2+ that DO NOT refer to specific sub-carriers.
In addition, the table contains parameters
that provide information about t…

Indexes

IF-MIBifIndex vdsl2SCStatusDirection

Column Syntax OID

vdsl2SCStatusDirection

The direction of the sub-carrier either
upstream or downstream

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction Enumeration

Type Values:

1	upstream
2	downstream

.1.3.6.1.4.1.2011.6.115.1.2.3.1.1

vdsl2SCStatusLinScale

The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic
procedure.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.3.1.2

vdsl2SCStatusLinScGroupSize

Number of sub-carriers per group used to report the H(f)
linear representation values for the respective transmission
direction. The valid values are 1, 2, 4 and 8. For ADSL, this
parameter is equal to one and, for VDSL…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.2011.6.115.1.2.3.1.3

vdsl2SCStatusLogMt

The number of symbols used to measure the H(f) logarithmic
measurement values for the respective transmission direction.
This parameter should correspond to the value specified in the
recommendation (e.g., the number of…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.3.1.4

vdsl2SCStatusLogScGroupSize

Number of sub-carriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.2011.6.115.1.2.3.1.5

vdsl2SCStatusQlnMt

The number of symbols used to measure the Quiet Line Noise
values on the respective transmission direction. This
parameter should correspond to the value specified in the
recommendation (e.g., the number of symbols in…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.3.1.6

vdsl2SCStatusQlnScGroupSize

Number of sub-carriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
e…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.2011.6.115.1.2.3.1.7

vdsl2SCStatusMtime

symbolsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.3.1.8

vdsl2SCStatusSnrScGroupSize

Number of sub-carriers per group used to report the SNR
values on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the si…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.2011.6.115.1.2.3.1.9

vdsl2SCStatusAttainableRate

Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the XTU-C transmitter and XTU-R
receiver (when referring to downstream direction) or by the
XTU-R transmitter and XTU-C receiver (when ref…

bits/secondSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.2.3.1.10

vdsl2SCStatusActAtp

Actual Aggregate Transmit Power from the XTU (XTU-R on
downstream direction and XTU-C on upstream direction), at the
instant of measurement. It ranges from -310 to 310 units of
0.1 dB (Physical values are -31 to 31 dBm…

0.1 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.115.1.2.3.1.11

vdsl2SCStatusRowStatus

Row Status. The SNMP agent should create rows in this
table and in the vdsl2SCStatusTable for storing the results
of a DELT performed on the associated line, if such rows
do not already exist.
The SNMP agent may have l…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.2.3.1.12

vdsl2SCStatusProfile

This configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles Enumeration

Type Values:

-1	invalidValue
1	profile8a
2	profile8b
3	profile8c
4	profile8d
5	profile12a
6	profile12b
7	profile17a
8	profile30a

.1.3.6.1.4.1.2011.6.115.1.2.3.1.13

vdsl2SCStatusClassmask

In order to reduce the number of configuration possibilities,
the limit PSD masks are grouped in the following PSD mask classes:
- Class 998 Annex A: D-32, D-64.
- Class 997-M1c Annex B: 997-M1c-A-7.
- Class 997-M1x…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask Enumeration

Type Values:

-1	invalidValue
1	annexA998-D-32
2	annexA998-D-64
3	annexB997-M1c-A-7
4	annexB997-M1x-M-8
5	annexB997-M1x-M
6	annexB997-M2x-M-8
7	annexB997-M2x-A
8	annexB997-M2x-M
9	annexB998-M1x-A
10	annexB998-M1x-B
11	annexB998-M1x-NUS0
12	annexB998-M2x-A
13	annexB998-M2x-M
14	annexB998-M2x-B
15	annexB998-M2x-NUS0
16	annexBHPE17-M1-NUS0
17	annexBHPE30-M1-NUS0
18	annexB997E17-M2x-A
19	annexB997E30-M2x-NUS0
20	annexB998E17-M2x-NUS0
21	annexB998E17-M2x-NUS0-M
22	annexB998ADE17-M2x-NUS0-M
23	annexB998ADE17-M2x-B
24	annexB998E30-M2x-NUS0
25	annexB998E30-M2x-NUS0-M
26	annexB998ADE30-M2x-NUS0-M
27	annexB998ADE17-M2x-A
28	annexB998ADE30-M2x-NUS0-A
29	annexA998-D-48
30	annexA998-D-128
31	annexB998ADE17-M2x-M
32	annexB998E17-M2x-A

.1.3.6.1.4.1.2011.6.115.1.2.3.1.14

vdsl2SCStatusBandTable

table

.1.3.6.1.4.1.2011.6.115.1.2.4 · 1 row entry · 5 columns

Open in standard view

The table vdsl2SCStatusBandTable contains
sub-carrier status parameters for VDSL2/ADSL/ADSL2
and ADSL2+ that are grouped per-band.
For ADSL/ADSL2/ADSL2+, there is a single
upstream band and a single downstream band.
For VDSL2, there are several downstream bands and
several upstream bands. 
The indexes of this table are ifIndex and vdsl2SCStatusBand.

vdsl2SCStatusBandEntry entry .1.3.6.1.4.1.2011.6.115.1.2.4.1

The table vdsl2SCStatusBandTable contains
sub-carrier status parameters for VDSL2/ADSL/ADSL2
and ADSL2+ that are grouped per-band.
For ADSL/ADSL2/ADSL2+, there is a single
upstream band and a single downstream band.
For…

Indexes

IF-MIBifIndex vdsl2SCStatusBand

Column Syntax OID

vdsl2SCStatusBand

The transmission band.
Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link.
For a band in the upstream direction, transmission is from
the remote end (xTU-R) towards the central office end (xTU-C).
A band in the upstr…

HUAWEI-VDSL2-LINE-TC-MIBXdsl2Band

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBXdsl2Band Enumeration

Type Values:

1	upstream
2	downstream
3	us0
4	ds1
5	us1
6	ds2
7	us2
8	ds3
9	us3
10	ds4
11	us4

.1.3.6.1.4.1.2011.6.115.1.2.4.1.1

vdsl2SCStatusBandLnAtten

When referring to a band in the downstream direction, it is
the measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all
sub-carriers during diagnostics mode.
…

0.1 dBUnsigned32

Constraints:
range: 0-1270
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.6.115.1.2.4.1.2

vdsl2SCStatusBandSigAtten

When referring to a band the downstream direction, it is the
measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all sub
carriers during Showtime after the diag…

0.1 dBUnsigned32

Constraints:
range: 0-1270
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.6.115.1.2.4.1.3

vdsl2SCStatusBandSnrMargin

SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R on downstream direction and xTU-C
on upstream direction), such that the BER requirements are met
for all bearer channels received at…

0.1 dBInteger32

Constraints:
range: -640-630
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.6.115.1.2.4.1.4

vdsl2SCStatusBandUpbokle

This parameter is a vector of UPBO electrical length per-band
estimates for each supported upstream/downstream band,
expressed in dB at 1 MHz (kl0) calculated by the VTU-O/VTU-R,
based on separate measurements in the…

0.1 dBUnsigned32

Constraints:
range: 0-1280
range: 2047-2047
range: 2147483647-2147483647

.1.3.6.1.4.1.2011.6.115.1.2.4.1.5

vdsl2SCStatusSegmentTable

table

.1.3.6.1.4.1.2011.6.115.1.2.5 · 1 row entry · 16 columns

Open in standard view

The table vdsl2SCStatusSegmentTable contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. 
Several objects in the table refer to NSus and NSds. For
G.993.2, the value of NSus and NSds are respectively the indices
of the highest supported upstream and downstream subcarriers
according to the selected implementation profile. For ADSL,
NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
The indexes of this table are ifIndex, vdsl2SCStatusDirection, 
and vdsl2SCStatusSegment.  
One index of this entry is an interface index where the
interface has an ifType of vdsl2(251). The second index of this
entry is the transmission direction. The third index identifies
the specific segment of the sub-carriers status addressed.

vdsl2SCStatusSegmentEntry entry .1.3.6.1.4.1.2011.6.115.1.2.5.1

The table vdsl2SCStatusSegmentTable contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers.
Several objects in the table refer to NSus and NSds. For
G.993.2, the value of NSus and NSds are…

Indexes

IF-MIBifIndex vdsl2SCStatusDirection vdsl2SCStatusSegment

Column	Syntax	OID
vdsl2SCStatusSegment The segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment of the status information is retrieved with vdsl2SCStatusSegm…	Unsigned32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.1`
vdsl2SCStatusSegmentLinReal An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a …	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.2`
vdsl2SCStatusSegmentLinImg An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a …	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.3`
vdsl2SCStatusSegmentLog An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a single s…	dBOctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.4`
vdsl2SCStatusSegmentQln An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number…	dBm/HzOctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.5`
vdsl2SCStatusSegmentSnr The SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of 512 octets, designed for supporting up to 512 (downstream) …	0.5 dBOctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.6`
vdsl2SCStatusSegmentBitsAlloc The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-carriers are supported, the status information is reported …	bitsOctetString Constraints: `range: 0-256`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.7`
vdsl2SCStatusSegmentGainAlloc The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported throu…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.8`
vdsl2SCStatusSegmentTssi The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 octets - Index …	HUAWEI-VDSL2-LINE-TC-MIBVdsl2Tssi Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Tssi `OctetString` Type Constraints: `range: 0..96`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.9`
vdsl2SCStatusSegmentTxPSD The TxPSD per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through multipl…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65535`
vdsl2SCStatusSegmentSnrMargin The SnrMargin per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through mul…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65536`
vdsl2SCStatusSegmentLogScGroupSize Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for…	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65537`
vdsl2SCStatusSegmentQlnScGroupSize Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is e…	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65538`
vdsl2SCStatusSegmentLinScGroupSize Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL…	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65539`
vdsl2SCStatusSegmentSnrScGroupSize Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the si…	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65540`
hwvdsl2SCStatusSegmentQlnWithVectoring An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number…	dBm/HzOctetString Constraints: `range: 0-512`	`.1.3.6.1.4.1.2011.6.115.1.2.5.1.65541`

hwVdslSCFextTable

table

.1.3.6.1.4.1.2011.6.115.1.2.6 · 1 row entry · 12 columns

Open in standard view

The table hwVdslSCFextTable contains FEXT coupling function parameters.
The indexes of this table are ifIndex, hwVdslSCFextFromIfindex, 
and hwVdslSCFextRequestXLinScGroupSize.

hwVdslSCFextEntry entry .1.3.6.1.4.1.2011.6.115.1.2.6.1

The table hwVdslSCFextTable contains FEXT coupling function parameters.
The indexes of this entry are ifIndex, hwVdslSCFextFromIfindex,
and hwVdslSCFextRequestXLinScGroupSize.

Indexes

IF-MIBifIndex hwVdslSCFextFromIfindex hwVdslSCFextRequestXLinScGroupSize

Column	Syntax	OID
hwVdslSCFextFromIfindex The hwVdslSCFextFromIfindex is an interface index where the interface has an ifType of vdsl2(251).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.1`
hwVdslSCFextRequestXLinScGroupSize This parameter is the requested value of XLING. The valid values are 1, 2, 4, 8, 16, 32, and 64.	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8` `range: 16-16` `range: 32-32` `range: 64-64`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.2`
hwVdslSCFextXLinScaleDs This parameter is the scale factor to be applied to the downstream Xlinpsds values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.3`
hwVdslSCFextXlinScGroupSizeDs This parameter is the number of subcarriers per group used to report Xlinpsds. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGds should equal the sub-sampling factor used to estimate the crosstalk channel for …	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8` `range: 16-16` `range: 32-32` `range: 64-64`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.4`
hwVdslSCFextXLinBandDs XLINBANDSds contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsds is reported.	OctetString Constraints: `range: 0-96`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.5`
hwVdslSCFextXlinRealDs For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f) originating from the loop connected to the VCE port k i…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.6`
hwVdslSCFextXlinImgDs For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f) originating from the loop connected to the VCE port k i…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.7`
hwVdslSCFextXLinScaleUs This parameter is the scale factor to be applied to the upstream Xlinpsus values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.8`
hwVdslSCFextXlinScGroupSizeUs This parameter is the number of subcarriers per group used to report Xlinpsus. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGus should equal the sub-sampling factor used to estimate the crosstalk channel for …	Unsigned32 Constraints: `range: 1-2` `range: 4-4` `range: 8-8` `range: 16-16` `range: 32-32` `range: 64-64`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.9`
hwVdslSCFextXLinBandUs XLINBANDSus contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsus is reported.	OctetString Constraints: `range: 0-96`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.10`
hwVdslSCFextXlinRealUs For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) originating from the loop connected to the VCE port k int…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.11`
hwVdslSCFextXlinImgUs For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) originating from the loop connected to the VCE port k int…	OctetString Constraints: `range: 0-1024`	`.1.3.6.1.4.1.2011.6.115.1.2.6.1.12`

vdsl2LineInventoryTable

table

.1.3.6.1.4.1.2011.6.115.1.3.1 · 1 row entry · 8 columns

Open in standard view

The table vdsl2LineInventoryTable contains inventory of VDSL2
unit. The indexes of this table are ifIndex and vdsl2LInvUnit.

vdsl2LineInventoryEntry entry .1.3.6.1.4.1.2011.6.115.1.3.1.1

The table vdsl2LineInventoryTable contains inventory of VDSL2
unit. The indexes of this entry are ifIndex and vdsl2LInvUnit.

Indexes

IF-MIBifIndex vdsl2LInvUnit

Column Syntax OID

vdsl2LInvUnit

The termination unit XTUC{1} or XTUR{2}.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.3.1.1.1

vdsl2LInvG994VendorId

The xTU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35.

OctetString

Constraints:
range: 0-8

.1.3.6.1.4.1.2011.6.115.1.3.1.1.2

vdsl2LInvSystemVendorId

The xTU System Vendor ID (identifies the xTU system
integrator) as inserted in the Overhead Messages (both xTUs
for G.992.3 and G.992.4) or in the Embedded Operations
Channel (only xTU-R in G.992.1 and G.992.2). It con…

OctetString

Constraints:
range: 0-8

.1.3.6.1.4.1.2011.6.115.1.3.1.1.3

vdsl2LInvVersionNumber

The xTU version number (vendor specific information) as
inserted in the Overhead Messages (both xTUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only xTU-R in
G.992.1 and G.992.2). It consists of up…

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.115.1.3.1.1.4

vdsl2LInvSerialNumber

The xTU serial number (vendor specific information) as
inserted in the Overhead Messages (both xTUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only xTU-R in
G.992.1 and G.992.2). It is vendor speci…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.3.1.1.5

vdsl2LInvSelfTestResult

The xTU self-test result, coded as a 32-bit integer. The
most significant octet of this object is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discreti…

OctetString

Constraints:
range: 0-4

.1.3.6.1.4.1.2011.6.115.1.3.1.1.6

vdsl2LInvTransmissionCapabilities

The xTU transmission system capability list of the different
coding types. It is coded in a bit-map representation with 1
or more bits set. A bit set to '1' means that the xTU
supports the respective coding. The valu…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeType

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeType Bits

Type Values:

0	ansit1413
1	etsi
2	g9921PotsNonOverlapped
3	g9921PotsOverlapped
4	g9921IsdnNonOverlapped
5	g9921isdnOverlapped
6	g9921tcmIsdnNonOverlapped
7	g9921tcmIsdnOverlapped
8	g9922potsNonOverlapeed
9	g9922potsOverlapped
10	g9922tcmIsdnNonOverlapped
11	g9922tcmIsdnOverlapped
12	g9921tcmIsdnSymmetric
13	reserved1
14	reserved2
15	reserved3
16	reserved4
17	reserved5
18	g9923PotsNonOverlapped
19	g9923PotsOverlapped
20	g9923IsdnNonOverlapped
21	g9923isdnOverlapped
22	reserved6
23	reserved7
24	g9924potsNonOverlapeed
25	g9924potsOverlapped
26	reserved8
27	reserved9
28	g9923AnnexIAllDigNonOverlapped
29	g9923AnnexIAllDigOverlapped
30	g9923AnnexJAllDigNonOverlapped
31	g9923AnnexJAllDigOverlapped
32	g9924AnnexIAllDigNonOverlapped
33	g9924AnnexIAllDigOverlapped
34	g9923AnnexLMode1NonOverlapped
35	g9923AnnexLMode2NonOverlapped
36	g9923AnnexLMode3Overlapped
37	g9923AnnexLMode4Overlapped
38	g9923AnnexMPotsNonOverlapped
39	g9923AnnexMPotsOverlapped
40	g9925PotsNonOverlapped
41	g9925PotsOverlapped
42	g9925IsdnNonOverlapped
43	g9925isdnOverlapped
44	reserved10
45	reserved11
46	g9925AnnexIAllDigNonOverlapped
47	g9925AnnexIAllDigOverlapped
48	g9925AnnexJAllDigNonOverlapped
49	g9925AnnexJAllDigOverlapped
50	g9925AnnexMPotsNonOverlapped
51	g9925AnnexMPotsOverlapped
52	reserved12
53	reserved13
54	reserved14
55	reserved15
56	reserved16
57	reserved17
58	reserved18
59	reserved19
60	reserved20
61	reserved21
62	reserved22
63	reserved23
64	reserved24
65	reserved25
66	reserved26
67	reserved27
68	reserved28
69	reserved29
70	reserved30
71	reserved31
72	g9932AnnexAPots
73	g9932AnnexAIsdn
74	g9932AnnexBPots
75	g9932AnnexBIsdn
76	g9932AnnexCPots
77	g9932AnnexCIsdn
78	g9935
79	g9935FriendlyDs
80	g9935FullFriendly
81	reserved32

.1.3.6.1.4.1.2011.6.115.1.3.1.1.7

vdsl2LInvModelId

The XTU model ID.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.3.1.1.8

vdsl2PMLineCurrTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.1 · 1 row entry · 75 columns

Open in standard view

The table vdsl2PMLineCurrTable contains current Performance
Monitoring results of VDSL2 line.  
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251) and the termination
unit.

vdsl2PMLineCurrEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.1.1

The table vdsl2PMLineCurrTable contains current Performance
Monitoring results of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251) and the termination
unit.

Indexes

IF-MIBifIndex vdsl2PMLCurrUnit

Column Syntax OID

vdsl2PMLCurrUnit

The termination unit XTUC{1} or XTUR{2}.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.1

vdsl2PMLCurrValidIntervals

Valid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.2

vdsl2PMLCurrInvalidIntervals

Invalid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.3

vdsl2PMLCurr15MTimeElapsed

Total elapsed seconds in this interval.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed

Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32

Type Constraints:
range: 0..86399

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.4

vdsl2PMLCurr15MFecs

Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.5

vdsl2PMLCurr15MEs

Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.6

vdsl2PMLCurr15MSes

Count of seconds during this interval that there was:
xTU-C: If G.998.4 is supported and retransmission is enabled
in the near-end received direction, a SES is declared
if during a 1-second interval, …

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7

vdsl2PMLCurr15MLoss

Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.8

vdsl2PMLCurr15MUas

Count of seconds in Unavailability State during this
interval. Unavailability begins at the onset of 10
contiguous severely-errored seconds, and ends at the
onset of 10 contiguous seconds with no severely-errored
secon…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.9

vdsl2PMLCurr1DayValidIntervals

Valid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.10

vdsl2PMLCurr1DayInvalidIntervals

Invalid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.11

vdsl2PMLCurr1DayTimeElapsed

Total elapsed seconds in this interval.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed

Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32

Type Constraints:
range: 0..86399

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.12

vdsl2PMLCurr1DayFecs

Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.13

vdsl2PMLCurr1DayEs

Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.14

vdsl2PMLCurr1DaySes

Count of seconds during this interval that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE summed over all bearer channels) >= 18 OR…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.15

vdsl2PMLCurr1DayLoss

Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.16

vdsl2PMLCurr1DayUas

Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored secon…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.17

vdsl2PMLEverBeforeFecs

Count of seconds since agent reset that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Huawei defined.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.18

vdsl2PMLEverBeforeEs

Count of seconds since agent reset that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
L…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.19

vdsl2PMLEverBeforeSes

Count of seconds since agent reset that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE summed over all bearer channels) >= 18 OR
…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.20

vdsl2PMLEverBeforeLoss

Count of seconds since agent reset that there was LOS (or
LOS-FE for xTU-R).
Huawei defined.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.21

vdsl2PMLEverBeforeUas

Count of seconds in Unavailability State since agent reset.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored seconds.…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.22

vdsl2PMLCurr15MLofs

Count of seconds in the current 15 minute interval when there was Loss of Framing.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.23

vdsl2PMLCurr15MLols

Count of seconds in the current 15 minute interval when there was Loss of Link.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.24

vdsl2PMLCurr15MLops

Count of seconds in the current 15 minute interval when there was Loss of Power.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.25

vdsl2PMLCurr1DayLofs

Count of the number of seconds when there was Loss of Framing during the current day.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.26

vdsl2PMLCurr1DayLols

Count of the number of seconds when there was Loss of Link during the current day.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.27

vdsl2PMLCurr1DayLops

Count of the number of seconds when there was Loss of Power during the current day.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.28

vdsl2PMLEverBeforeLofs

Count of the number of seconds when there was Loss of Framing since agent reset.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.29

vdsl2PMLEverBeforeLols

Count of the number of seconds when there was Loss of Link since agent reset.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.30

vdsl2PMLEverBeforeLops

Count of the number of seconds when there was Loss of Power since agent reset.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.31

vdsl2PMLCurr15MSosSuccess

Count of the total number of successful SOS procedures initiated in the current 15 minute.
Unit: times

timesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.32

vdsl2PMLCurr1DaySosSuccess

Count of the total number of successful SOS procedures initiated during the current day.
Unit: times

timesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.33

vdsl2PMLEverBeforeSosSuccess

Count of the total number of successful SOS procedures initiated since agent reset.
Unit: times

timesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.34

vdsl2PMLCurr15MInmainpeq

This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 15 minutes.

OctetString

Constraints:
range: 0-68

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.35

vdsl2PMLCurr15MInmame

This parameter is a count of the INMAME anomalies
occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.36

vdsl2PMLCurr15MInmaiat

This parameter is a count of the INMAIATi anomalies
occurring on the line during current 15 minutes.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.37

vdsl2PMLCurr1DayInmainpeq

This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 1 day.

OctetString

Constraints:
range: 0-68

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.38

vdsl2PMLCurr1DayInmame

This parameter is a count of the INMAME anomalies
occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.39

vdsl2PMLCurr1DayInmaiat

This parameter is a count of the INMAIATi anomalies
occurring on the line during current 1 day.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.40

vdsl2PMLEverBeforeInmainpeq

This parameter is a count of the INMAINPEQi anomalies
occurring on the line ever before.

OctetString

Constraints:
range: 0-68

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.41

vdsl2PMLEverBeforeInmame

This parameter is a count of the INMAME anomalies
occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.42

vdsl2PMLEverBeforeInmaiat

This parameter is a count of the INMAIATi anomalies
occurring on the line ever before.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.43

vdsl2PMLineCurr15MStartTime

Start time of the current 15-minute performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.44

vdsl2PMLineCurr1DayStartTime

Start time of the current 1-day performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.45

vdsl2PMLCurr15MLeftrs

If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.46

vdsl2PMLCurr15MEfb

If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 15 minutes
accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.47

vdsl2PMLCurr15MMinEftr

If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.48

vdsl2PMLCurr1DayLeftrs

If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.49

vdsl2PMLCurr1DayEfb

If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 24 hours
accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.50

vdsl2PMLCurr1DayMinEftr

If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.51

vdsl2PMLEverBeforeLeftrs

If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.52

vdsl2PMLEverBeforeEfb

If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.53

vdsl2PMLEverBeforeMinEftr

If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.54

hwvdsl2PMLEverBeforeSraDownShiftEvent

This parameter is a count of sra downshift event occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.55

hwvdsl2PMLEverBeforeSraUpShiftEvent

This parameter is a count of sra upshift event occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.56

hwvdsl2PMLCurr15MSraDownShiftEvent

This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.57

hwvdsl2PMLCurr15MSraUpShiftEvent

This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.58

hwvdsl2PMLCurr1DaySraDownShiftEvent

This parameter is a count of sra downshift event occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.59

hwvdsl2PMLCurr1DaySraUpShiftEvent

This parameter is a count of sra upshift event occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.60

hwvdsl2PMLEverBeforeDisorderLeavingEvent

This parameter is a count of disorder leaving event occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.61

hwvdsl2PMLEverBeforeLof

This parameter is a count of loss of frame failure occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.62

hwvdsl2PMLEverBeforeLos

This parameter is a count of loss of signal failure occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.63

hwvdsl2PMLEverBeforeLop

This parameter is a count of loss of power failure occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.64

hwvdsl2PMLEverBeforeLom

This parameter is a count of loss of margin failure occurring on the line ever before.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.65

hwvdsl2PMLCurr15MDisorderLeavingEvent

This parameter is a count of disorder leaving event occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.66

hwvdsl2PMLCurr1DayDisorderLeavingEvent

This parameter is a count of disorder leaving event occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.67

hwvdsl2PMLCurr15MLof

This parameter is a count of loss of frame failure occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.68

hwvdsl2PMLCurr15MLos

This parameter is a count of loss of signal failure occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.69

hwvdsl2PMLCurr15MLop

This parameter is a count of loss of power failure occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.70

hwvdsl2PMLCurr15MLom

This parameter is a count of loss of margin failure occurring on the line during current 15 minutes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.71

hwvdsl2PMLCurr1DayLof

This parameter is a count of loss of frame failure occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.72

hwvdsl2PMLCurr1DayLos

This parameter is a count of loss of signal failure occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.73

hwvdsl2PMLCurr1DayLop

This parameter is a count of loss of power failure occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.74

hwvdsl2PMLCurr1DayLom

This parameter is a count of loss of margin failure occurring on the line during current 1 day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.75

vdsl2PMLineCurrInitTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.2 · 1 row entry · 16 columns

Open in standard view

The table vdsl2PMLineCurrInitTable contains current
initialization counters of VDSL2 line. 
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251) and the termination
unit.

vdsl2PMLineCurrInitEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.2.1

The table vdsl2PMLineCurrInitTable contains current
initialization counters of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251) and the termination
unit.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vdsl2PMLCurrInit15MTimeElapsed Total elapsed seconds in this interval. Unit: seconds	secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.1`
vdsl2PMLCurrInit15MFullInits Count of full initializations attempted on the line (successful and failed) during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.2`
vdsl2PMLCurrInit15MFailedFullInits Count of failed full initializations on the line during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.3`
vdsl2PMLCurrInit15MShortInits Count of short initializations attempted on the line (successful and failed) during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.4`
vdsl2PMLCurrInit15MFailedShortInits Count of failed short initializations on the line during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.5`
vdsl2PMLCurrInit1DayTimeElapsed Total elapsed seconds in this interval. Unit: seconds	secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.6`
vdsl2PMLCurrInit1DayFullInits Count of full initializations attempted on the line (successful and failed) during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.7`
vdsl2PMLCurrInit1DayFailedFullInits Count of failed full initializations on the line during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.8`
vdsl2PMLCurrInit1DayShortInits Count of short initializations attempted on the line (successful and failed) during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.9`
vdsl2PMLCurrInit1DayFailedShortInits Count of failed short initializations on the line during this interval.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.10`
vdsl2PMLInitEverBeforeFullInits Count of full initializations attempted on the line (successful and failed) since agent reset. Huawei defined.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.11`
vdsl2PMLInitEverBeforeFailedFullInits Count of failed full initializations on the line since agent reset. Huawei defined.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.12`
vdsl2PMLInitEverBeforeShortInits Count of short initializations attempted on the line (successful and failed) since agent reset. Huawei defined.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.13`
vdsl2PMLInitEverBeforeFailedShortInits Count of failed short initializations on the line since agent reset. Huawei defined.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.14`
vdsl2PMLineCurrInit15MStartTime Start time of the current initializations 15-minute performance statistics.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.15`
vdsl2PMLineCurrInit1DayStartTime Start time of the current initializations 1-day performance statistics.	SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime `OctetString` Type Constraints: `range: 8` `range: 11`	`.1.3.6.1.4.1.2011.6.115.1.4.1.2.1.16`

vdsl2PMLineHist15MinTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.3 · 1 row entry · 27 columns

Open in standard view

The table vdsl2PMLineHist15MinTable contains PM line history
for 15min intervals of VDSL2 line.   
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251), the termination unit,
and an interval number.

vdsl2PMLineHist15MinEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.3.1

The table vdsl2PMLineHist15MinTable contains PM line history
for 15min intervals of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251), the termination unit,
and…

Indexes

IF-MIBifIndex vdsl2PMLHist15MUnit vdsl2PMLHist15MInterval

Column Syntax OID

vdsl2PMLHist15MUnit

The termination unit XTUC{1} or XTUR{2}.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.1

vdsl2PMLHist15MInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.2

vdsl2PMLHist15MMonitoredTime

Total seconds monitored in this interval.
Unit: seconds

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.3

vdsl2PMLHist15MFecs

Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.4

vdsl2PMLHist15MEs

Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.5

vdsl2PMLHist15MSes

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.6

vdsl2PMLHist15MLoss

Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.7

vdsl2PMLHist15MUas

Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored secon…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8

vdsl2PMLHist15MValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.9

vdsl2PMLHist15MLofs

Count of seconds in the interval when there was Loss of Framing.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.10

vdsl2PMLHist15MLols

Count of seconds in the interval when there was Loss of Link.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.11

vdsl2PMLHist15MLops

Count of seconds in the interval when there was Loss of Power.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.12

vdsl2PMLHist15MSosSuccess

Count of the total number of successful SOS procedures initiated in the interval.
Unit: times

timesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.13

vdsl2PMLHist15MInmainpeq

This parameter is a count of the INMAINPEQi anomalies
occurring on the line over the 15 minutes accumulation period.

OctetString

Constraints:
range: 0-68

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.14

vdsl2PMLHist15MInmame

This parameter is a count of the INMAME anomalies
occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.15

vdsl2PMLHist15MInmaiat

This parameter is a count of the INMAIATi anomalies
occurring on the line over the 15 minutes accumulation period.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.16

vdsl2PMLHist15MStartTime

Start time of the historical 15-minute performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17

vdsl2PMLHist15MLeftrs

If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.18

vdsl2PMLHist15MEfb

If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 15 minutes
accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.19

vdsl2PMLHist15MMinEftr

If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.20

hwvdsl2PMLHist15MSraDownShiftEvent

This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.21

hwvdsl2PMLHist15MSraUpShiftEvent

This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.22

hwvdsl2PMLHist15MDisorderLeavingEvent

This parameter is a count of disorder leaving event occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.23

hwvdsl2PMLHist15MLof

This parameter is a count of loss of frame failure occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.24

hwvdsl2PMLHist15MLos

This parameter is a count of loss of signal failure occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.25

hwvdsl2PMLHist15MLop

This parameter is a count of loss of power failure occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.26

hwvdsl2PMLHist15MLom

This parameter is a count of loss of margin failure occurring on the line over the 15 minutes accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.27

vdsl2PMLineHist1DayTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.4 · 1 row entry · 27 columns

Open in standard view

The table vdsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of VDSL2 line.
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251), the termination unit
and an interval number.

vdsl2PMLineHist1DayEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.4.1

The table vdsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251), the termination unit
an…

Indexes

IF-MIBifIndex vdsl2PMLHist1DUnit vdsl2PMLHist1DInterval

Column Syntax OID

vdsl2PMLHist1DUnit

The termination unit.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.1

vdsl2PMLHist1DInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.2

vdsl2PMLHist1DMonitoredTime

Total seconds monitored in this interval.
Unit: seconds

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.3

vdsl2PMLHist1DFecs

Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.4

vdsl2PMLHist1DEs

Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.5

vdsl2PMLHist1DSes

Count of seconds during this interval that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >> 1 OR LPR >= 1
xTU-R: (FEBE summed over all bearer channels) >= 18…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.6

vdsl2PMLHist1DLoss

Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.7

vdsl2PMLHist1DUas

Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored secon…

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.8

vdsl2PMLHist1DValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.9

vdsl2PMLHist1DLofs

Count of seconds during this interval that there was Loss of Framing.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.10

vdsl2PMLHist1DLols

Count of seconds during this interval that there was Loss of Link.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.11

vdsl2PMLHist1DLops

Count of seconds during this interval that there was Loss of Power.
Unit: seconds

secondsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.12

vdsl2PMLHist1DSosSuccess

Count of the total number of successful SOS procedures initiated during this interval.
Unit: times

timesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.13

vdsl2PMLHist1DInmainpeq

This parameter is a count of the INMAINPEQi anomalies
occurring on the line over the 24 hours accumulation period.

OctetString

Constraints:
range: 0-68

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.14

vdsl2PMLHist1DInmame

This parameter is a count of the INMAME anomalies
occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.15

vdsl2PMLHist1DInmaiat

This parameter is a count of the INMAIATi anomalies
occurring on the line over the 24 hours accumulation period.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.16

vdsl2PMLHist1DStartTime

Start time of the historical 1-day performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.17

vdsl2PMLHist1DLeftrs

If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.18

vdsl2PMLHist1DEfb

If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 24 hours
accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.19

vdsl2PMLHist1DMinEftr

If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.20

hwvdsl2PMLHist1DSraDownShiftEvent

This parameter is a count of sra downshift event occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.21

hwvdsl2PMLHist1DSraUpShiftEvent

This parameter is a count of sra upshift event occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.22

hwvdsl2PMLHist1DDisorderLeavingEvent

This parameter is a count of disorder leaving event occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.23

hwvdsl2PMLHist1DLof

This parameter is a count of loss of frame failure occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.24

hwvdsl2PMLHist1DLos

This parameter is a count of loss of signal failure occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.25

hwvdsl2PMLHist1DLop

This parameter is a count of loss of power failure occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.26

hwvdsl2PMLHist1DLom

This parameter is a count of loss of margin failure occurring on the line over the 24 hours accumulation period.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.27

vdsl2PMLineInitHist15MinTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.5 · 1 row entry · 8 columns

Open in standard view

The table vdsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of VDSL2 line.  
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251) and an interval number.

vdsl2PMLineInitHist15MinEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.5.1

The table vdsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251) an…

Indexes

IF-MIBifIndex vdsl2PMLHistInit15MInterval

Column Syntax OID

vdsl2PMLHistInit15MInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.1

vdsl2PMLHistInit15MMonitoredTime

Total seconds monitored in this interval.
Unit: seconds

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.2

vdsl2PMLHistInit15MFullInits

Count of full initializations attempted on the line
(successful and failed) during this interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.3

vdsl2PMLHistInit15MFailedFullInits

Count of failed full initializations on the line during this
interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.4

vdsl2PMLHistInit15MShortInits

Count of short initializations attempted on the line
(successful and failed) during this interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.5

vdsl2PMLHistInit15MFailedShortInits

Count of failed short initializations on the line during this
interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.6

vdsl2PMLHistInit15MValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.7

vdsl2PMLHistInit15MStartTime

Start time of the historical initializations 15-minute performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.5.1.8

vdsl2PMLineInitHist1DayTable

table

.1.3.6.1.4.1.2011.6.115.1.4.1.6 · 1 row entry · 8 columns

Open in standard view

The table vdsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of VDSL2 line. 
The indexes of this table are an interface index where the
interface has an ifType of vdsl2(251) and an interval number.

vdsl2PMLineInitHist1DayEntry entry .1.3.6.1.4.1.2011.6.115.1.4.1.6.1

The table vdsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of VDSL2 line.
The indexes of this entry are an interface index where the
interface has an ifType of vdsl2(251) and a…

Indexes

IF-MIBifIndex vdsl2PMLHistinit1DInterval

Column Syntax OID

vdsl2PMLHistinit1DInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.1

vdsl2PMLHistinit1DMonitoredTime

Total seconds monitored in this interval.

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.2

vdsl2PMLHistinit1DFullInits

Count of full initializations attempted on the line
(successful and failed) during this interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.3

vdsl2PMLHistinit1DFailedFullInits

Count of failed full initializations on the line during this
interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.4

vdsl2PMLHistinit1DShortInits

Count of short initializations attempted on the line
(successful and failed) during this interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.5

vdsl2PMLHistinit1DFailedShortInits

Count of failed short initializations on the line during this
interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.6

vdsl2PMLHistinit1DValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.7

vdsl2PMLHistinit1DStartTime

Start time of the historical initializations 1-day performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.1.6.1.8

vdsl2PMChCurrTable

table

.1.3.6.1.4.1.2011.6.115.1.4.2.1 · 1 row entry · 36 columns

Open in standard view

The table vdsl2PMChCurrTable contains current Performance
Monitoring results of VDSL2 channel. 
The indexes of this table are an interface index where
the interface has an ifType value which is applicable
for a DSL channel and the termination unit.

vdsl2PMChCurrEntry entry .1.3.6.1.4.1.2011.6.115.1.4.2.1.1

The table vdsl2PMChCurrTable contains current Performance
Monitoring results of VDSL2 channel.
The indexes of this entry are an interface index where
the interface has an ifType value which is applicable
for a DSL chann…

Indexes

IF-MIBifIndex vdsl2PMChCurrUnit

Column Syntax OID

vdsl2PMChCurrUnit

The termination unit.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.1

vdsl2PMChCurrValidIntervals

Valid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.2

vdsl2PMChCurrInvalidIntervals

Invalid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.3

vdsl2PMChCurr15MTimeElapsed

Total elapsed seconds in this interval.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed

Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32

Type Constraints:
range: 0..86399

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.4

vdsl2PMChCurr15MCodingViolations

Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited
during UAS or SES. If the CRC is applied over multiple
channels, then each related CRC-8 (or FEBE) an…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.5

vdsl2PMChCurr15MCorrectedBlocks

Count of FEC (FFEC for xTU-R) anomalies (corrected code words)
occurring in the channel during the interval. This parameter
is inhibited during UAS or SES. If the FEC is applied over
multiple channels, then each relat…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.6

vdsl2PMChCurr1DayValidIntervals

Valid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.7

vdsl2PMChCurr1DayInvalidIntervals

Invalid intervals.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.8

vdsl2PMChCurr1DayTimeElapsed

Total elapsed seconds in this interval.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed

Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32

Type Constraints:
range: 0..86399

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.9

vdsl2PMChCurr1DayCodingViolations

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.10

vdsl2PMChCurr1DayCorrectedBlocks

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.11

vdsl2PMChEverBeforeCodingViolations

Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the
channel since agent reset. This parameter is inhibited
during UAS or SES. If the CRC is applied over multiple
channels, then each related CRC-8 (or FEBE) anom…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.12

vdsl2PMChEverBeforeCorrectedBlocks

Count of FEC (FFEC for xTU-R) anomalies (corrected code words)
occurring in the channel since agent reset. This parameter
is inhibited during UAS or SES. If the FEC is applied over
multiple channels, then each related…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.13

vdsl2PMChCurr15MEncodedBlocks

Count of all encoded blocks received
on this channel within the current 15 minute interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.14

vdsl2PMChCurr15MUncorrectableBlocks

Count of all blocks received with
uncorrectable errors on this channel within the current 15 minute interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.15

vdsl2PMChCurr1DayEncodedBlocks

Count of all encoded blocks received on this channel during the current day.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.16

vdsl2PMChCurr1DayUncorrectableBlocks

Count of all blocks received with uncorrectable errors on this channel during the current day.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.17

vdsl2PMChEverBeforeEncodedBlocks

Count of all encoded blocks received on this
channel since agent reset.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.18

vdsl2PMChEverBeforeUncorrectableBlocks

Count of all blocks received with uncorrectable
errors since agent reset.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.19

vdsl2PMChCurr15MAtmCells

Count of Atm Cells received
within the current 15 minute interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.20

vdsl2PMChCurr15MPtmPackets

Count of Ptm Packet received
within the current 15 minute interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.21

vdsl2PMChCurr1DayAtmCells

Count of Atm Cells received
during the current day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.22

vdsl2PMChCurr1DayPtmPackets

Count of Ptm Packets received
during the current day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.23

vdsl2PMChEverBeforeAtmCells

Count of Atm Cells received
since agent reset.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.24

vdsl2PMChEverBeforePtmPackets

Count of Ptm Packets received
since agent reset.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.25

vdsl2PMChCurr15MRtxCW

Count of units request retransmission within the current 15 minute interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.26

vdsl2PMChCurr15MRtxCorrectedCW

Count of units corrected by retransmission within the current 15 minute interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.27

vdsl2PMChCurr15MRtxUncorrectedCW

Count of units uncorrected by retransmission within the current 15 minute interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.28

vdsl2PMChCurr1DayRtxCW

Count of units request retransmission during the current day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.29

vdsl2PMChCurr1DayRtxCorrectedCW

Count of units corrected by retransmission during the current day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.30

vdsl2PMChCurr1DayRtxUncorrectedCW

Count of units uncorrected by retransmission during the current day.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.31

vdsl2PMChEverBeforeRtxCW

Count of units request retransmission since agent reset.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.32

vdsl2PMChEverBeforeRtxCorrectedCW

Count of units corrected by retransmission since agent reset.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.33

vdsl2PMChEverBeforeRtxUncorrectedCW

Count of units uncorrected by retransmission since agent reset.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.34

vdsl2PMChCurr15MStartTime

Start time of the channel current 15-minute performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.35

vdsl2PMChCurr1DayStartTime

Start time of the channel current 1-day performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.2.1.1.36

vdsl2PMChHist15MinTable

table

.1.3.6.1.4.1.2011.6.115.1.4.2.2 · 1 row entry · 14 columns

Open in standard view

The table vdsl2PMChHist15MinTable contains PM channel history 
for 15min intervals of VDSL2 channel. 
The indexes of this table are an interface index where
the interface has an ifType value which is applicable
for a DSL channel, the termination unit and the
interval number.

vdsl2PMChHist15MinEntry entry .1.3.6.1.4.1.2011.6.115.1.4.2.2.1

The table vdsl2PMChHist15MinTable contains PM channel history
for 15min intervals of VDSL2 channel.
The indexes of this entry are an interface index where
the interface has an ifType value which is applicable
for a DSL…

Indexes

IF-MIBifIndex vdsl2PMChHist15MUnit vdsl2PMChHist15MInterval

Column Syntax OID

vdsl2PMChHist15MUnit

The termination unit.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.1

vdsl2PMChHist15MInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.2

vdsl2PMChHist15MMonitoredTime

Total seconds monitored in this interval.
Unit: seconds

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.3

vdsl2PMChHist15MCodingViolations

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.4

vdsl2PMChHist15MCorrectedBlocks

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.5

vdsl2PMChHist15MValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.6

vdsl2PMChHist15MEncodedBlocks

Count of all encoded blocks received on this
channel during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.7

vdsl2PMChHist15MUncorrectableBlocks

Count of all blocks received with uncorrectable
errors on this channel during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.8

vdsl2PMChHist15MAtmCells

Count of Atm Cells received
on this channel during the interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.9

vdsl2PMChHist15MPtmPackets

Count of Ptm Packets received
on this channel during the interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.10

vdsl2PMChHist15MRtxCW

Count of units request retransmission during the
serval 15 minute interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.11

vdsl2PMChHist15MRtxCorrectedCW

Count of units corrected by retransmission during the
serval 15 minute interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.12

vdsl2PMChHist15MRtxUncorrectedCW

Count of units uncorrected by retransmission during
the serval 15 minute interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.13

vdsl2PMChHist15MStartTime

Start time of the channel historical 15-minute performance
statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.2.2.1.14

vdsl2PMChHist1DTable

table

.1.3.6.1.4.1.2011.6.115.1.4.2.3 · 1 row entry · 14 columns

Open in standard view

The table vdsl2PMChHist1DTable contains PM channel history
for 1 day intervals of VDSL2. The indexes of this table are
an interface index where
the interface has an ifType value which is applicable
for a DSL channel, the termination unit and the
interval number.

vdsl2PMChHist1DEntry entry .1.3.6.1.4.1.2011.6.115.1.4.2.3.1

The table vdsl2PMChHist1DTable contains PM channel history
for 1 day intervals of VDSL2.
The indexes of this entry are an interface index where
the interface has an ifType value which is applicable
for a DSL channel, th…

Indexes

IF-MIBifIndex vdsl2PMChHist1DUnit vdsl2PMChHist1DInterval

Column Syntax OID

vdsl2PMChHist1DUnit

The termination unit.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.1

vdsl2PMChHist1DInterval

The interval number.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.2

vdsl2PMChHist1DMonitoredTime

Total seconds monitored in this interval.
Unit: seconds

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.3

vdsl2PMChHist1DCodingViolations

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.4

vdsl2PMChHist1DCorrectedBlocks

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.5

vdsl2PMChHist1DValidInterval

This variable indicates if the data for this interval is
valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.6

vdsl2PMChHist1DEncodedBlocks

Count of all encoded blocks received on this
channel during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.7

vdsl2PMChHist1DUncorrectableBlocks

Count of all blocks received with uncorrectable
errors on this channel during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.8

vdsl2PMChHist1DAtmCells

Count of Atm Cells received
on this channel during the interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.9

vdsl2PMChHist1DPtmPackets

Count of Ptm Packets received
on this channel during the interval.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.10

vdsl2PMChHist1DRtxCW

Count of units request retransmission within the
serval one day interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.11

vdsl2PMChHist1DRtxCorrectedCW

Count of units corrected by retransmission during the
serval one day interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.12

vdsl2PMChHist1DRtxUncorrectedCW

Count of units uncorrected by retransmission during
the serval one day interval of history.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.13

vdsl2PMChHist1DStartTime

Start time of the channel historical 1-day performance statistics.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.115.1.4.2.3.1.14

vdsl2PMChChipStatTable

table

.1.3.6.1.4.1.2011.6.115.1.4.2.4 · 1 row entry · 6 columns

Open in standard view

The table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of 
upstream and downstream of VDSL2 channel. 
The indexes of this table are an interface index where
the interface has an ifType value which is applicable
for a DSL channel and the termination unit.

vdsl2PMChChipStatEntry entry .1.3.6.1.4.1.2011.6.115.1.4.2.4.1

The table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of
upstream and downstream of VDSL2 channel.
The indexes of this entry are an interface index where
the interface has an ifType value which i…

Indexes

IF-MIBifIndex vdsl2PMChChipstatUnit

Column Syntax OID

vdsl2PMChChipstatUnit

The termination unit.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit Enumeration

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.1

vdsl2PMChPktsDs

The number of downstream packets.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.2

vdsl2PMChPktsUs

The number of upstream packets.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.3

vdsl2PMChCrcErrsDs

The number of downstream CRC errors.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.4

vdsl2PMChCrcErrsUs

The number of upstream CRC errors.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.5

vdsl2PMChStatAdminStatus

Clear the number of packets transmitted and received,
CRC errors upstream and downstream.
Options:
1. reset(1) - reset statistic data

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.2011.6.115.1.4.2.4.1.6

vdsl2LineConfTemplateTable

table

.1.3.6.1.4.1.2011.6.115.1.5.1.1 · 1 row entry · 15 columns

Open in standard view

The table vdsl2LineConfTemplateTable contains VDSL2 line
configuration template. The index of this table is 
vdsl2LConfTempTemplateName.  
A default template with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2LineConfTemplateEntry entry .1.3.6.1.4.1.2011.6.115.1.5.1.1.1

The table vdsl2LineConfTemplateTable contains VDSL2 line
configuration template.
The index of this entry is vdsl2LConfTempTemplateName.
A default template with an index of 'DEFVAL' will
always exist and its parameters w…

Indexes

vdsl2LConfTempTemplateName

Column Syntax OID

vdsl2LConfTempTemplateName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.1

vdsl2LConfTempLineProfile

The value of this object identifies the row in the VDSL2 Line
Configuration Profile Table, (Vdsl2LineConfProfileTable),
which applies for this VDSL2 line.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.2

vdsl2LConfTempChan1ConfProfile

The value of this object identifies the row in the VDSL2
Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer
channel #1. The channel profile name specified here must
match the …

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.3

vdsl2LConfTempChan1RaRatioDs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.4

vdsl2LConfTempChan1RaRatioUs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.5

vdsl2LConfTempChan2ConfProfile

The value of this object identifies the row in the VDSL2
Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer
channel #2. If the channel is unused, then the object is set
to a z…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.6

vdsl2LConfTempChan2RaRatioDs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #2 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.7

vdsl2LConfTempChan2RaRatioUs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #2 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.8

vdsl2LConfTempChan3ConfProfile

The value of this object identifies the row in the VDSL2
Channel Configuration Profile Table,
(Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer
channel #3. If the channel is unused, then the object is set
to a z…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.9

vdsl2LConfTempChan3RaRatioDs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #3 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.10

vdsl2LConfTempChan3RaRatioUs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #3 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.11

vdsl2LConfTempChan4ConfProfile

The value of this object identifies the row in the VDSL2
Channel Configuration Profile Table
(Vdsl2ChanConfProfileTableDs) that applies to VDSL2 bearer
channel #4. If the channel is unused, then the object is set
to a …

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.12

vdsl2LConfTempChan4RaRatioDs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #4 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.13

vdsl2LConfTempChan4RaRatioUs

Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #4 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.14

vdsl2LConfTempRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.1.1.1.15

vdsl2LineConfProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.1.2 · 1 row entry · 75 columns

Open in standard view

The table vdsl2LineConfProfTable contains VDSL2 line profile
configuration. The index of this table is vdsl2LConfProfProfileName. 
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2LineConfProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.1.2.1

The table vdsl2LineConfProfTable contains VDSL2 line profile
configuration. The index of this entry is vdsl2LConfProfProfileName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be …

Indexes

vdsl2LConfProfProfileName

Column Syntax OID

vdsl2LConfProfProfileName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.1

vdsl2LConfProfScMaskDs

Sub-carriers mask. A bitmap of 512 bits that allows masking
up to 512 downstream sub-carriers, depending on NSCds. If bit
i (0 <= i < NSCds) is set to '1', the respective
downstream sub-carrier i is masked, and …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskDs OctetString

Type Constraints:
range: 0..64

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.2

vdsl2LConfProfScMaskUs

Sub-carriers mask. A bitmap of 64 bits that allows masking
up to 64 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the respective
upstream sub-carrier i is masked, and if s…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskUs OctetString

Type Constraints:
range: 0..8

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.3

vdsl2LConfProfRfiBands

The subset of PSD mask breakpoints that shall be
used to notch an RFI band.
It is a string of bands consist of begin tone index
and end tone index.
for example :0-10,20-50,100-4095
It can contain as most as 16 bands.

OctetStringr/w

Constraints:
range: 0-159

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.4

vdsl2LConfProfVDSLtoneblackout

The subset of subcarriermask that shall be
used to mask the subcarriers.
It is a string of bands consist of begin tone index
and end tone index.
for example :0-10,20-50,100-4095
It can contain as most as 8 bands.

OctetStringr/w

Constraints:
range: 0-79

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.5

vdsl2LConfProfRaModeDs

The mode of operation of a rate-adaptive xTU-C in the transmit
direction.
Options:
1. manual(1) - No Rate-Adaptation. The initialization
process attempts to synchronize t…

Enumerationr/w

Enumerated Values:

1	manual
2	rainit
3	dynamic
4	dynamicwithsos

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.6

vdsl2LConfProfRaModeUs

The mode of operation of a rate-adaptive xTU-R in the transmit
direction.
Options:
1. manual(1) - No Rate-Adaptation. The initialization
process attempts to synchronize t…

Enumerationr/w

Enumerated Values:

1	manual
2	rainit
3	dynamic
4	dynamicwithsos

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.7

vdsl2LConfProfRaUsNrmDs

The Downstream Up-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream
noise margin is above this value and stays above it for
more than the time specified by the Vdsl2…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.8

vdsl2LConfProfRaUsNrmUs

The Upstream Up-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream
noise margin is above this value and stays above it for more
than the time specified by the Vdsl2Line…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.9

vdsl2LConfProfRaUsTimeDs

The Downstream Up-Shift Time Interval, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of
time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before the …

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.10

vdsl2LConfProfRaUsTimeUs

The Upstream Up-Shift Time Interval, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of
time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the xTU-C shall…

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.11

vdsl2LConfProfRaDsNrmsDs

The Downstream Down-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified by the V…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.12

vdsl2LConfProfRaDsNrmsUs

The Upstream Downshift Noise Margin value, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the Vdsl2L…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.13

vdsl2LConfProfRaDsTimeDs

The Downstream Downshift Time Interval, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of
time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before the xT…

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.14

vdsl2LConfProfRaDsTimeUs

The Upstream Down-Shift Time Interval, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of
time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the xTU-C s…

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.15

vdsl2LConfProfTargetSnrmDs

The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 31…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.16

vdsl2LConfProfTargetSnrmUs

The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 …

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.17

vdsl2LConfProfMaxSnrmDs

The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
to get a noise margin below this limit (i…

0.1 dBSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.18

vdsl2LConfProfMaxSnrmUs

The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
to get a noise margin below this limit (i…

0.1 dBSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.19

vdsl2LConfProfMinSnrmDs

The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.20

vdsl2LConfProfMinSnrmUs

The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is…

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.21

vdsl2LConfProfMsgMinUs

Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps.
Unit: b…

bits/secondUnsigned32r/w

Constraints:
range: 4000-63000

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.22

vdsl2LConfProfMsgMinDs

Minimum Overhead Rate Downstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps.
Uni…

bits/secondUnsigned32r/w

Constraints:
range: 4000-63000

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.23

vdsl2LConfProfXtuTransSysEna

xTU Transmission System Enabling (XTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the XTUs may apply …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeType Bits

Type Values:

0	ansit1413
1	etsi
2	g9921PotsNonOverlapped
3	g9921PotsOverlapped
4	g9921IsdnNonOverlapped
5	g9921isdnOverlapped
6	g9921tcmIsdnNonOverlapped
7	g9921tcmIsdnOverlapped
8	g9922potsNonOverlapeed
9	g9922potsOverlapped
10	g9922tcmIsdnNonOverlapped
11	g9922tcmIsdnOverlapped
12	g9921tcmIsdnSymmetric
13	reserved1
14	reserved2
15	reserved3
16	reserved4
17	reserved5
18	g9923PotsNonOverlapped
19	g9923PotsOverlapped
20	g9923IsdnNonOverlapped
21	g9923isdnOverlapped
22	reserved6
23	reserved7
24	g9924potsNonOverlapeed
25	g9924potsOverlapped
26	reserved8
27	reserved9
28	g9923AnnexIAllDigNonOverlapped
29	g9923AnnexIAllDigOverlapped
30	g9923AnnexJAllDigNonOverlapped
31	g9923AnnexJAllDigOverlapped
32	g9924AnnexIAllDigNonOverlapped
33	g9924AnnexIAllDigOverlapped
34	g9923AnnexLMode1NonOverlapped
35	g9923AnnexLMode2NonOverlapped
36	g9923AnnexLMode3Overlapped
37	g9923AnnexLMode4Overlapped
38	g9923AnnexMPotsNonOverlapped
39	g9923AnnexMPotsOverlapped
40	g9925PotsNonOverlapped
41	g9925PotsOverlapped
42	g9925IsdnNonOverlapped
43	g9925isdnOverlapped
44	reserved10
45	reserved11
46	g9925AnnexIAllDigNonOverlapped
47	g9925AnnexIAllDigOverlapped
48	g9925AnnexJAllDigNonOverlapped
49	g9925AnnexJAllDigOverlapped
50	g9925AnnexMPotsNonOverlapped
51	g9925AnnexMPotsOverlapped
52	reserved12
53	reserved13
54	reserved14
55	reserved15
56	reserved16
57	reserved17
58	reserved18
59	reserved19
60	reserved20
61	reserved21
62	reserved22
63	reserved23
64	reserved24
65	reserved25
66	reserved26
67	reserved27
68	reserved28
69	reserved29
70	reserved30
71	reserved31
72	g9932AnnexAPots
73	g9932AnnexAIsdn
74	g9932AnnexBPots
75	g9932AnnexBIsdn
76	g9932AnnexCPots
77	g9932AnnexCIsdn
78	g9935
79	g9935FriendlyDs
80	g9935FullFriendly
81	reserved32

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.24

vdsl2LConfProfPmMode

Power management state Enabling. Defines the power states the
xTU-C or xTU-R may autonomously transition to on this line.
Options:
1. allowTransitionsToIdle (0)
2. allowTransitionsToLowPower (1)
A bit with a '1' val…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LConfProfPmModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LConfProfPmMode Bits

Type Values:

0	allowTransitionsToIdle
1	allowTransitionsToLowPower

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.25

vdsl2LConfProfL0Time

This minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state.
Unit: seconds

secondsUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.26

vdsl2LConfProfL2Time

This minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State.
Unit: seconds

secondsUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.27

vdsl2LConfProfL2Atpr

The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state.
It ranges from 0 dB to 31 dB.
Unit: dB

dBUnsigned32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.28

vdsl2LConfProfL2Atprt

The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and Power Trims.
Unit: dB

dBUnsigned32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.29

vdsl2LConfProfDpboEpsd

This parameter defines the PSD mask that is assumed to be permitted at the exchange.
This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints
for DPBOEPSD is 16.
This is a string of 16 p…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEpsdr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEpsd OctetString

Type Constraints:
range: 0..48

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.30

vdsl2LConfProfDpboEsel

This configuration parameter defines the assumed electrical length of
cables (E-side cables) connecting exchange based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to
spec…

0.5dBUnsigned32r/w

Constraints:
range: 0-511

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.31

vdsl2LConfProfDpboEscm

This configuration parameter defines a cable model in terms of three scalars
DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency
dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEscmr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEscm OctetString

Type Constraints:
range: 0..6

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.32

vdsl2LConfProfDpboMus

DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for
exchange based services, used to modify parameter DPBOFMAX defined below. It
shall be coded as an unsigned integer representing a PSD level…

-0.5dBm/HzUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.33

vdsl2LConfProfDpboFmin

DPBOFMIN defines the minimum frequency from which the DPBO shall be applied.
It shall be coded as a 16 bits unsigned integer representing a frequency in
multiple of 4.3125 KHz. The range of valid values is from 0 kHz …

4.3125 KHzUnsigned32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.34

vdsl2LConfProfDpboFmax

DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be
coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz.
The range of valid values is from 138 kHz (coded …

4.3125 KHzUnsigned32r/w

Constraints:
range: 32-6956

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.35

vdsl2LConfProfUpboPsdBand

This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band except US0. A UPBOPSD defined for each band shall consist of two
parameters [a, b]. Parameter a shall be …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBandr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand OctetString

Type Constraints:
range: 0..20

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.36

vdsl2LConfProfUpboKl

This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by
the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0)
to 128 dB (coded as 1280) in s…

0.1 dBUnsigned32r/w

Constraints:
range: 0-1280

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.37

vdsl2LConfProfUpboKlf

This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB
(UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the
electrical loop length shall…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlfr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlf Enumeration

Type Values:

1	forced
2	auto

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.38

vdsl2LConfProfRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.39

vdsl2LConfProfReferenceClock

This object configures the clock reference for the ATU-C
in a VDSL Line.

Vdsl2LineClockReferenceTyper/w

Textual Convention: Vdsl2LineClockReferenceType Enumeration

Type Values:

1	freeRun
2	system

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65534

vdsl2LConfProfBitSwapDs

Enables or disables the bit swap downstream of a line.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2BitSwapr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2BitSwap Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65535

vdsl2LConfProfBitSwapUs

Enables or disables the bit swap upstream of a line.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2BitSwapr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2BitSwap Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65536

vdsl2LConfProfUpboBoostMode

Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported
2. enable(2) - The Equalized FEXT UPBO method is supported

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostMode Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65537

vdsl2LConfProfDpboEselMin

DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz
using cross-cables to additional KVz)…

0.5dBUnsigned32r/w

Constraints:
range: 0-511

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65538

vdsl2LConfProfUpboKl0RefBand

Octets 0+1 - length[1]
Octets 2+3 - length[2]
Octets 4+5 - length[3]
Octets 6+7 - length[4]

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBandr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBand OctetString

Type Constraints:
range: 0..8

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65539

vdsl2LConfProfSosTimeDs

The parameter is used in the specification of the receiver initiated SOS.
If the value of this parameter is not zero, the standard SOS triggering criteria are enabled,
and the value corresponds with duration of the ti…

64msUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65540

vdsl2LConfProfSosTimeUs

64msUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65541

vdsl2LConfProfSosNtonesDs

This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET
that must be degraded in order to arm the first sub-condition of the standard SOS triggering
criteria in the downstream directi…

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65542

vdsl2LConfProfSosNtonesUs

This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET
that must be degraded in order to arm the first sub-condition of the standard SOS triggering
criteria in the downstream direction…

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65543

vdsl2LConfProfSosCrcDs

This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds
seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the
downstream direction…

0.02Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65544

vdsl2LConfProfSosCrcUs

0.02Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65545

vdsl2LConfProfMaxSosDs

This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the
downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition
to the L3 s…

Unsigned32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65546

vdsl2LConfProfMaxSosUs

This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the
upstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition
to the L3 sta…

Unsigned32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65547

vdsl2LConfProfSnrmoffsetRocDs

The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction.
The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2).
The valid range …

0.1dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65548

vdsl2LConfProfSnrmoffsetRocUs

The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction.
The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2).
The valid range of…

0.1dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65549

vdsl2LConfProfInpminRocDs

This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction.
The minimum impulse noise protection is an integer ranging from 0 to 16.

Unsigned32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65550

vdsl2LConfProfInpminRocUs

This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction.
The minimum impulse noise protection is an integer ranging from 0 to 16.

Unsigned32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65551

vdsl2LConfProfInmIatoDs

The parameter of downstream impulse noise monitoring inter arrival time offset.
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IA…

Unsigned32r/w

Constraints:
range: 3-511

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65552

vdsl2LConfProfInmIatsDs

The parameter of downstream impulse noise monitoring inter arrival time step.
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is…

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65553

vdsl2LConfProfInmCcDs

The parameter of Downstream impulse noise monitoring cluster continuation value.
This is the Cluster Continuation value that the xTU receiver shall use
in the cluster indication process described in the relevant ITU-T …

Unsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65554

vdsl2LConfProfInmInpeqModeDs

The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode.
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
as defined in th…

Unsigned32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65555

vdsl2LConfProfInmIatoUs

The parameter of upstream impulse noise monitoring inter arrival time offset.
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT …

Unsigned32r/w

Constraints:
range: 3-511

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65556

vdsl2LConfProfInmIatsUs

The parameter of upstream impulse noise monitoring inter arrival time step.
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is r…

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65557

vdsl2LConfProfInmCcUs

The parameter of upstream impulse noise monitoring cluster continuation value.
This is the Cluster Continuation value that the xTU receiver shall use
in the cluster indication process described in the relevant ITU-T Re…

Unsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65558

vdsl2LConfProfInmInpeqModeUs

The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode.
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
as defined in the …

Unsigned32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65559

vdsl2LConfProfL3Time

This minimum time (in seconds) between an Entry into the
L3 state and the L0 or L2 state.
Unit: seconds

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65560

vdsl2LConfProfRtxModeDs

The mode of operation of G.998.4 retransmission in downstream direction.
Options:
1. forbidden(0) - G.998.4 retransmission not allowed.
2. preferred(1) - G.998.4 retransmission is preferred.
3. forced(2…

Enumerationr/w

Enumerated Values:

0	forbidden
1	preferred
2	forced
3	testmode

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65561

vdsl2LConfProfRtxModeUs

The mode of operation of G.998.4 retransmission in upstream direction.
Options:
1. forbidden(0) - G.998.4 retransmission not allowed.
2. preferred(1) - G.998.4 retransmission is preferred.
3. forced(2) …

Enumerationr/w

Enumerated Values:

0	forbidden
1	preferred
2	forced
3	testmode

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65562

vdsl2LConfProfLeftrThreshDs

If retransmission is used in downstream direction, this parameter specifies the
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
NDR with valid range from 0.01 to 0.99 with incr…

0.01Unsigned32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65563

vdsl2LConfProfLeftrThreshUs

If retransmission is used in upstream direction, this parameter specifies the
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
NDR with valid range from 0.01 to 0.99 with increm…

0.01Unsigned32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65564

vdsl2LConfProfForceInpDs

This parameter indicates that the framer settings of the
bearer shall be selected such that the impulse noise protection
computed according to the formula specified in the relevant
Recommendation is greater or equal to…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65565

vdsl2LConfProfForceInpUs

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65566

vdsl2LConfProfAeleMode

This parameter defines the UPBO electrical length estimation mode to be used
in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2.
The value of this parameter is 0, 1, 2 or 3.
0-ELE_M…

Unsigned32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65567

vdsl2LConfProfUpboElmt

This parameter defines the UPBO electrical length minimum threshold percentile
in percent used in the Alternative Electrical Length Estimation method (ELE-M1)
in clause 7.2.1.3.2.2/G.993.2. It is set by network manag…

Unsigned32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65568

vdsl2LconfProfUpboKlAuto

This parameter defines the mode in which kl0 is computed when vdsl2LconfProfUpboKlf is auto.
Options:
1--max(kl0_CO,kl0_CPE)
2--min(kl0_CO,kl0_CPE)
3--kl0_CO
4--kl0_CPE
4294967295--Invalid value

Unsigned32r/w

Constraints:
range: 1-4
range: 4294967295-4294967295

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65569

vdsl2LineConfProfModeSpecTable

table

.1.3.6.1.4.1.2011.6.115.1.5.1.3 · 1 row entry · 18 columns

Open in standard view

The table vdsl2LineConfProfModeSpecTable extends the
VDSL2 line configuration profile by VDSL Mode Specific
parameters.
A row in this table that has an index of
vdsl2LconfProfVdslMode == defMode(1), is called a
'mandatory' row.
A row in this table that has an index such that
vdsl2LconfProfVdslMode is not equal to defMode(1),
is called an 'optional' row.
When a row in the vdsl2LineConfProfTable table
(the parent row) is created, the SNMP agent will
automatically create a 'mandatory' row in this table.
When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table.
Any attempt to delete the 'mandatory' row using the
vdsl2LConfProfModeSpecRowStatus attribute will be
rejected by the SNMP agent.
The manager MAY create an 'optional' row in this table
using the vdsl2LConfProfModeSpecRowStatus attribute if
the parent row exists.
The manager MAY delete an 'optional' row in this table
using the vdsl2LConfProfModeSpecRowStatus attribute at
any time.
If the actual transmission mode of a DSL line does not
match one of the 'optional' rows in this table, then
the line will use the PSD configuration from the
'mandatory' row. 
The indexes of this table are vdsl2LConfProfProfileName 
and vdsl2LconfProfVdslMode.

vdsl2LineConfProfModeSpecEntry entry .1.3.6.1.4.1.2011.6.115.1.5.1.3.1

The table vdsl2LineConfProfModeSpecTable extends the
VDSL2 line configuration profile by VDSL Mode Specific
parameters.
A row in this table that has an index of
vdsl2LconfProfVdslMode == defMode(1), is called a
'mandat…

Indexes

vdsl2LConfProfProfileName vdsl2LconfProfVdslMode

Column Syntax OID

vdsl2LconfProfVdslMode

The VDSL Mode is a way of categorizing the various VDSL
transmission modes into groups, each group (VDSL Mode) shares
the same PSD configuration.
There should be multiple entries in this table for a given
line profile i…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes Enumeration

Type Values:

1	defMode
2	adsl
3	adsl2Pots
4	adsl2Isdn
5	adsl2PlusPots
6	adsl2PlusIsdn
7	adsl2ReachExtended
8	vdsl2Pots
9	vdsl2Isdn

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.1

vdsl2LConfProfMaxNomPsdDs

The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
Unit: 0.1 dBm/Hz

0.1 dBm/HzInteger32r/w

Constraints:
range: -600--300

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.2

vdsl2LConfProfMaxNomPsdUs

The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
Unit: 0.1 dBm/Hz

0.1 dBm/HzInteger32r/w

Constraints:
range: -600--300

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.3

vdsl2LConfProfMaxNomAtpDs

The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime.
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values are 0 to 25.5 dBm, 256 to 510 physical …

0.1 dBmUnsigned32r/w

Constraints:
range: 0-510

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.4

vdsl2LConfProfMaxNomAtpUs

The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime.
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values are 0 to 25.5 dBm, 256 to 510 physical va…

0.1 dBmUnsigned32r/w

Constraints:
range: 0-510

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.5

vdsl2LConfProfMaxAggRxPwrUs

The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges…

0.1 dBmInteger32r/w

Constraints:
range: -255-255

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.6

vdsl2LConfProfPsdMaskDs

This configuration parameter defines the downstream PSD mask
applicable at the U C2 reference point.
This MIB PSD mask may impose PSD restrictions in addition
to the Limit PSD mask defined in the relevant Recommendati…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDs OctetString

Type Constraints:
range: 0..96

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.7

vdsl2LConfProfPsdMaskUs

This configuration parameter defines the upstream PSD
mask applicable at the U R2 reference point. This MIB
PSD mask may impose PSD restrictions in addition to the
Limit PSD mask defined in the relevant Recommendatio…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUs OctetString

Type Constraints:
range: 0..48

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.8

vdsl2LConfProfPsdMaskSelectUs

The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
vdsl2LConfProfXtuTransSysEna.
The value is defined …

Unsigned32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.9

vdsl2LConfProfPSDClassMask

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMaskr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask Enumeration

Type Values:

-1	invalidValue
1	annexA998-D-32
2	annexA998-D-64
3	annexB997-M1c-A-7
4	annexB997-M1x-M-8
5	annexB997-M1x-M
6	annexB997-M2x-M-8
7	annexB997-M2x-A
8	annexB997-M2x-M
9	annexB998-M1x-A
10	annexB998-M1x-B
11	annexB998-M1x-NUS0
12	annexB998-M2x-A
13	annexB998-M2x-M
14	annexB998-M2x-B
15	annexB998-M2x-NUS0
16	annexBHPE17-M1-NUS0
17	annexBHPE30-M1-NUS0
18	annexB997E17-M2x-A
19	annexB997E30-M2x-NUS0
20	annexB998E17-M2x-NUS0
21	annexB998E17-M2x-NUS0-M
22	annexB998ADE17-M2x-NUS0-M
23	annexB998ADE17-M2x-B
24	annexB998E30-M2x-NUS0
25	annexB998E30-M2x-NUS0-M
26	annexB998ADE30-M2x-NUS0-M
27	annexB998ADE17-M2x-A
28	annexB998ADE30-M2x-NUS0-A
29	annexA998-D-48
30	annexA998-D-128
31	annexB998ADE17-M2x-M
32	annexB998E17-M2x-A

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.10

vdsl2LConfProfProfiles

This configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profilesr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles Enumeration

Type Values:

-1	invalidValue
1	profile8a
2	profile8b
3	profile8c
4	profile8d
5	profile12a
6	profile12b
7	profile17a
8	profile30a

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.11

vdsl2LConfProfBandOptUsage

Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).
Options:
1. unused(1) - indicates Opt is unused
2. used(2) - indicates Opt usage is for upstream
3. invalidValue(-1…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2BandOptUsager/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2BandOptUsage Enumeration

Type Values:

-1	invalidValue
1	unused
2	used

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.12

vdsl2LConfProfModeSpecRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.13

hwVdsl2ConfProfVirtualNoiseModeDs

This parameter enables the transmitter referred
virtual noise in the downstream direction.
If set to 1, the virtual noise is disabled.
If set to 2, the virtual noise is enabled.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiser/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoise Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65535

hwVdsl2ConfProfVirtualNoiseModeUs

This parameter enables the transmitter referred
virtual noise in the upstream direction.
If set to 1, the virtual noise is disabled.
If set to 2, the virtual noise is enabled.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiser/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoise Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65536

hwVdsl2ConfProfVirtualNoiseDs

This configuration parameter defines the downstream
transmitter referred virtual noise (TXREFVNds).
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index, …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseDs OctetString

Type Constraints:
range: 0..96

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65537

hwVdsl2ConfProfVirtualNoiseUs

This configuration parameter defines the upstream
transmitter referred virtual noise (TXREFVNus).
The TXREFVNus shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseUs OctetString

Type Constraints:
range: 0..48

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65538

hwVdsl2ConfProfAutoProfile

Enable or disable the G.993.2 profiles adaptive function.
If set to 1, the G.993.2 profiles adaptive function is disabled.
If set to 2, the G.993.2 profiles adaptive function is enabled.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2AutoProfiler/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2AutoProfile Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65539

vdsl2ChConfProfileTable

table

.1.3.6.1.4.1.2011.6.115.1.5.2.1 · 1 row entry · 56 columns

Open in standard view

The table vdsl2ChConfProfileTable contains VDSL2 channel
profile configuration. The index of this table is 
vdsl2ChConfProfProfileName.   
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2ChConfProfileEntry entry .1.3.6.1.4.1.2011.6.115.1.5.2.1.1

The table vdsl2ChConfProfileTable contains VDSL2 channel
profile configuration.
The index of this entry is vdsl2ChConfProfProfileName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters wil…

Indexes

vdsl2ChConfProfProfileName

Column Syntax OID

vdsl2ChConfProfProfileName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.1

vdsl2ChConfProfMinDataRateDs

If retransmission is not used in downstream direction,this parameter specifics
minimum data rate for the bearer channel on downstream direction. The rate is
coded in steps of 1000 bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.2

vdsl2ChConfProfMinDataRateUs

If retransmission is not used in upstream direction,this parameter specifics
minimum data rate for the bearer channel on upstream direction. The rate is
coded in steps of 1000 bit/s
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.3

vdsl2ChConfProfMinResDataRateDs

Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer cha…

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.4

vdsl2ChConfProfMinResDataRateUs

Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer chann…

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.5

vdsl2ChConfProfMaxDataRateDs

If retransmission is not used in downstream direction,this parameter specifics
maximum data rate for the bearer channel on downstream direction. The rate is
coded in steps of 1000 bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.6

vdsl2ChConfProfMaxDataRateUs

If retransmission is not used in upstream direction,this parameter specifics
maximum data rate for the bearer channel on upstream direction. The rate is
coded in steps of 1000 bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.7

vdsl2ChConfProfMinDataRateLowPwrDs

Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.992.3).
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.8

vdsl2ChConfProfMinDataRateLowPwrUs

Minimum Data Rate in Low Power state on Upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.992.3).
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.9

vdsl2ChConfProfMaxDelayDs

If retransmission is not used in downstream direction,this parameter
is maximum interleave delay on downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The XTU…

millisecondsUnsigned32r/w

Constraints:
range: 0-200
range: 255-255

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.10

vdsl2ChConfProfMaxDelayUs

If retransmission is not used in upstream direction,this parameter
is maximum interleave delay on upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shal…

millisecondsUnsigned32r/w

Constraints:
range: 0-200
range: 255-255

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.11

vdsl2ChConfProfMinProtectionDs

If retransmission is not used in downstream direction,this parameter
is minimum impulse noise protection for the bearer channel on downstream
direction. The minimum impulse noise protection for the bearer channel,
expre…

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.12

vdsl2ChConfProfMinProtectionUs

If retransmission is not used in upstream direction,this parameter
is minimum impulse noise protection for the bearer channel on upstream
direction. The minimum impulse noise protection for the bearer channel,
expressed…

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.13

vdsl2ChConfProfMaxBerDs

Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7).
Options:
1. eminus3 (1) - 1E-3
2. eminus5 (2) …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBerr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBer Enumeration

Type Values:

1	eminus3
2	eminus5
3	eminus7

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.14

vdsl2ChConfProfMaxBerUs

Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7).
Options:
1. eminus3 (1) - 1E-3
2. eminus5 (2) …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBerr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBer Enumeration

Type Values:

1	eminus3
2	eminus5
3	eminus7

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.15

vdsl2ChConfProfUsDataRateDs

If retransmission is not used in downstream direction,this parameter
is data rate threshold upshift for downstream direction. An
'Up-shift rate change' event is triggered when the actual
downstream data rate exceeds, by…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.16

vdsl2ChConfProfDsDataRateDs

If retransmission is not used in downstream direction,this parameter
is data rate threshold downshift for downstream direction. A
'Down-shift rate change' event is triggered when the actual
downstream data rate is belo…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.17

vdsl2ChConfProfUsDataRateUs

If retransmission is not used in upstream direction,this parameter
is data rate threshold up shift for upstream direction. An
'Up-shift rate change' event is triggered when the actual
upstream data rate exceeds, by mor…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.18

vdsl2ChConfProfDsDataRateUs

If retransmission is not used in upstream direction,this parameter
is data rate threshold downshift for upstream direction. A
'Down-shift rate change' event is triggered when the actual
upstream data rate is below the …

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.19

vdsl2ChConfProfImaEnabled

IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.20

vdsl2ChConfProfDataPathMode

The channel data path mode.
Options:
1. atm(1) - ATM
2. ptm(2) - PTM
3. both(3) - ATM and PTM
Huawei defined.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathMode Enumeration

Type Values:

1	atm
2	ptm
3	both

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.21

vdsl2ChConfProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.22

vdsl2ChConfProfPhyRcontrolDs

To enable or disable the retransmission function.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.23

vdsl2ChConfProfPhyRcontrolUs

To enable or disable the retransmission function.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.24

vdsl2ChConfProfInpMaxDs

Maximum Impulse Noise Protection on downstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.25

vdsl2ChConfProfInpMaxUs

Maximum Impulse Noise Protection on upstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.26

vdsl2ChConfProfMinRtxRatioDs

This object is used to config the minimum retransmission band width parameter downstream.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.27

vdsl2ChConfProfMinRtxRatioUs

This object is used to config the minimum retransmission band width parameter upstream.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.28

vdsl2ChConfProfMinRSoverheadDs

This object is used to config the minimum RSoverhead parameter downstream..

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.29

vdsl2ChConfProfMinRSoverheadUs

This object is used to config the minimum RSoverhead parameter upstream..

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.30

vdsl2ChConfProfErasureDecoding

To enable or disable the erasure decoding of a channel.
Options:
1. enable(1)
2. disable(2)

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.31

vdsl2ChConfProfMinSosBrDs

This parameter specifies the minimum net data rate required for a valid SOS request in
the downstream direction. The valid range of values is from 0 to 524280Kbps in steps of 8Kbps.
Unit: 8Kbps

8KbpsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.32

vdsl2ChConfProfMinSosBrUs

This parameter specifies the minimum net data rate required for a valid SOS request in
the upstream direction.The valid range of values is from 0 to 524280Kbps in steps of 8Kbps.
Unit: 8Kbps

8KbpsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.33

vdsl2ChConfProfMinEtrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.34

vdsl2ChConfProfMinEtrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.35

vdsl2ChConfProfMaxEtrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.36

vdsl2ChConfProfMaxEtrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.37

vdsl2ChConfProfMaxNdrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.38

vdsl2ChConfProfMaxNdrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.39

vdsl2ChConfProfMaxDelayRtxDs

If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges f…

millisecondsUnsigned32r/w

Constraints:
range: 1-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.40

vdsl2ChConfProfMaxDelayRtxUs

If retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges fro…

millisecondsUnsigned32r/w

Constraints:
range: 1-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.41

vdsl2ChConfProfMinDelayRtxDs

If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges f…

millisecondsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.42

vdsl2ChConfProfMinDelayRtxUs

If retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges fro…

millisecondsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.43

vdsl2ChConfProfMinInpShineRtxDs

If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of …

symbolsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.44

vdsl2ChConfProfMinInpShineRtxUs

If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.…

symbolsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.45

vdsl2ChConfProfMinInp8ShineRtxDs

symbolsUnsigned32r/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.46

vdsl2ChConfProfMinInp8ShineRtxUs

symbolsUnsigned32r/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.47

vdsl2ChConfProfShineRatioRtxDs

If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.48

vdsl2ChConfProfShineRatioRtxUs

If retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.49

vdsl2ChConfProfMinInpReinRtxDs

If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4…

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.50

vdsl2ChConfProfMinInpReinRtxUs

If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.3…

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.51

vdsl2ChConfProfMinInp8ReinRtxDs

Unsigned32r/w

Constraints:
range: 0-13

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.52

vdsl2ChConfProfMinInp8ReinRtxUs

Unsigned32r/w

Constraints:
range: 0-13

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.53

vdsl2ChConfProfIatReinRtxDs

If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a REI…

Enumerationr/w

Enumerated Values:

0	frequency100Hz
1	frequency120Hz

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.54

vdsl2ChConfProfIatReinRtxUs

If retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a REIN a…

Enumerationr/w

Enumerated Values:

0	frequency100Hz
1	frequency120Hz

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.55

vdsl2ChConfProfInitPolicy

This parameter indicates which policy shall be applied to
determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY are 0,1 and 2.
Those policies are defined in the respectiv…

Enumerationr/w

Enumerated Values:

1	policy0
2	policy1
3	policy2

.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.56

vdsl2LineAlarmConfTemplateTable

table

.1.3.6.1.4.1.2011.6.115.1.5.3.1 · 1 row entry · 7 columns

Open in standard view

The table vdsl2LineAlarmConfTemplateTable contains VDSL2 line
alarm configuration template. 
The index of this table is vdsl2LAlarmConfTempTemplateName.    
A default template with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document.

vdsl2LineAlarmConfTemplateEntry entry .1.3.6.1.4.1.2011.6.115.1.5.3.1.1

The table vdsl2LineAlarmConfTemplateTable contains VDSL2 line
alarm configuration template.
The index of this entry is vdsl2LAlarmConfTempTemplateName.
A default template with an index of 'DEFVAL' will
always exist and…

Indexes

vdsl2LAlarmConfTempTemplateName

Column Syntax OID

vdsl2LAlarmConfTempTemplateName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.1

vdsl2LAlarmConfTempLineProfile

The value of this object identifies the row in the VDSL2 Line
Thresholds Configuration Profile Table
(vdsl2LineAlarmConfProfileTable) that applies to this VDSL2
line.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.2

vdsl2LAlarmConfTempChan1ConfProfile

The value of this object identifies the row in the VDSL2
Channel Thresholds Configuration Profile Table
(vdsl2ChAlarmConfProfileTable) that applies for VDSL2
bearer channel #1. The channel profile name specified here
m…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.3

vdsl2LAlarmConfTempChan2ConfProfile

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.4

vdsl2LAlarmConfTempChan3ConfProfile

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.5

vdsl2LAlarmConfTempChan4ConfProfile

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.6

vdsl2LAlarmConfTempRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.3.1.1.7

vdsl2LineAlarmConfProfileTable

table

.1.3.6.1.4.1.2011.6.115.1.5.3.2 · 1 row entry · 27 columns

Open in standard view

The table vdsl2LineAlarmConfProfileTable contains VDSL2
line PM thresholds profiles. The index of this table is
vdsl2LineAlarmConfProfileName.   
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document.

vdsl2LineAlarmConfProfileEntry entry .1.3.6.1.4.1.2011.6.115.1.5.3.2.1

The table vdsl2LineAlarmConfProfileTable contains VDSL2
line PM thresholds profiles.
The index of this entry is vdsl2LineAlarmConfProfileName.
A default profile with an index of 'DEFVAL' will
always exist and its parame…

Indexes

vdsl2LineAlarmConfProfileName

Column Syntax OID

vdsl2LineAlarmConfProfileName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.1

vdsl2LineAlarmConfProfileXtucThresh15MinFecs

A threshold for the vdsl2PMLCurr15MFecs counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.2

vdsl2LineAlarmConfProfileXtucThresh15MinEs

A threshold for the vdsl2PMLCurr15MEs counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.3

vdsl2LineAlarmConfProfileXtucThresh15MinSes

A threshold for the vdsl2PMLCurr15MSes counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.4

vdsl2LineAlarmConfProfileXtucThresh15MinLoss

A threshold for the vdsl2PMLCurr15MLoss counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.5

vdsl2LineAlarmConfProfileXtucThresh15MinUas

A threshold for the vdsl2PMLCurr15MUas counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.6

vdsl2LineAlarmConfProfileXturThresh15MinFecs

A threshold for the vdsl2PMLCurr15MFecs counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.7

vdsl2LineAlarmConfProfileXturThresh15MinEs

A threshold for the vdsl2PMLCurr15MEs counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.8

vdsl2LineAlarmConfProfileXturThresh15MinSes

A threshold for the vdsl2PMLCurr15MSes counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.9

vdsl2LineAlarmConfProfileXturThresh15MinLoss

A threshold for the vdsl2PMLCurr15MLoss counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.10

vdsl2LineAlarmConfProfileXturThresh15MinUas

A threshold for the vdsl2PMLCurr15MUas counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.11

vdsl2LineAlarmConfProfileThresh15MinFailedFullInt

A threshold for the vdsl2PMLCurrInit15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.12

vdsl2LineAlarmConfProfileThresh15MinFailedShrtInt

A threshold for the vdsl2PMLCurrInit15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.13

vdsl2LineAlarmConfProfileRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.14

vdsl2LineAlarmConfProfileThresh15MinFullInt

A threshold for the vdsl2PMLCurrInit15MFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.15

vdsl2LineAlarmConfProfileXtucThresh15MinLeftrs

A threshold for the vdsl2PMLCurr15MLeftrs counter,
when vdsl2PMLCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.16

vdsl2LineAlarmConfProfileXturThresh15MinLeftrs

A threshold for the vdsl2PMLCurr15MLeftrs counter,
when vdsl2PMLCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds

secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w

Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32

Type Constraints:
range: 0..900

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.17

hwVdsl2LineAlarmConfProfileDyingGaspAlarmSwitch

This object enable/disable the report of LOSS-OF-POWER
alarm in a VDSL line.
Options:
1. enable(1) - The report of LOSS-OF-POWER alarm in a VDSL line is enabled
2. disable(2) - The report of LOSS-OF-POWER alarm in a VD…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.18

hwVdsl2LineAlarmConfProfileActiveFailAlarmSwitch

This object enable/disable the active fail alarm switch.
Options:
1. enable(1) - The active fail alarm switch is enabled
2. disable(2) - The active fail alarm switch is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.19

hwVdsl2LineAlarmConfProfileRateChangeAlarmSwitch

This object enable/disable the active rate change alarm switch.
Options:
1. enable(1) - The active rate change alarm switch is enabled
2. disable(2) - The active rate change alarm switch is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.20

hwVdsl2LineAlarmConfProfileLegacyCpeAlarmSwitch

This object enable/disable the legacy cpe alarm switch.
Options:
1. enable(1) - The legacy cpe alarm switch is enabled
2. disable(2) - The legacy cpe alarm switch is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.21

hwVdsl2LineAlarmConfProfileVictAbnormalVariationAlarmSwitch

This object enable/disable alarm switch that the port
receives abnormal crosstalk.
Options:
1. enable(1) - The alarm switch that the port receives
abnormal crosstalk is enabled
2. disable(2) - The ala…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.22

hwVdsl2LineAlarmConfProfileDistAbnormalVariationAlarmSwitch

This object enable/disable the alarm switch that the port
causes abnormal crosstalk.
Options:
1. enable(1) - The alarm switch that the port causes
abnormal crosstalk is enabled
2. disable(2) - The alar…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.23

hwVdsl2LineAlarmConfProfileReceivedESAbnormalAlarmSwitch

This object enable/disable the alarm switch that The port
receives abnormal error sample messages.
Options:
1. enable(1) - The alarm switch that the port receives
abnormal error sample messages is enab…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.24

hwVdsl2LineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitch

This object enable/disable the alarm switch that the port is
activated in none-vectoring mode.
Options:
1. enable(1) - The alarm switch that the port is activated
in none-vectoring mode is enabled
2. d…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.25

hwVdsl2LineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitch

This object enable/disable the alarm switch that the port
frequently retrain times in 15 minutes reach the threshold.
Options:
1. enable(1) - The alarm switch that the port frequently retrain
times in …

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.26

hwvdsl2LineAlarmConfProfilePSConfigAbnormalAlarmSwitch

This object enable/disable the pilot sequence configuration abnormal alarm switch.
Options:
1. enable(1) - The pilot sequence configuration abnormal alarm switch is enabled
2. disable(2) - The pilot sequence configura…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.3.2.1.27

vdsl2ChAlarmConfProfileTable

table

.1.3.6.1.4.1.2011.6.115.1.5.3.3 · 1 row entry · 8 columns

Open in standard view

The table vdsl2ChAlarmConfProfileTable contains VDSL2
channel PM thresholds profiles. 
The index of this table is vdsl2ChAlarmConfProfileName. 
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2ChAlarmConfProfileEntry entry .1.3.6.1.4.1.2011.6.115.1.5.3.3.1

The table vdsl2ChAlarmConfProfileTable contains VDSL2
channel PM thresholds profiles.
The index of this entry is vdsl2ChAlarmConfProfileName.
A default profile with an index of 'DEFVAL' will
always exist and its paramet…

Indexes

vdsl2ChAlarmConfProfileName

Column Syntax OID

vdsl2ChAlarmConfProfileName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.1

vdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations

A threshold for the vdsl2PMChCurr15MCodingViolations
counter, when vdsl2PMChCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.2

vdsl2ChAlarmConfProfileXtucThresh15MinCorrected

A threshold for the vdsl2PMChCurr15MCorrectedBlocks
counter, when vdsl2PMChCurrUnit is XTUC {1}.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.3

vdsl2ChAlarmConfProfileXturThresh15MinCodingViolations

A threshold for the vdsl2PMChCurr15MCodingViolations
counter, when vdsl2PMChCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.4

vdsl2ChAlarmConfProfileXturThresh15MinCorrected

A threshold for the vdsl2PMChCurr15MCorrectedBlocks
counter, when vdsl2PMChCurrUnit is XTUR {2}.
The value 0 means that no threshold is specified for the
associated counter.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.5

vdsl2ChAlarmConfProfileMonitoringRateDs

The channel monitoring rate downstream.
Huawei defined. When the value you set is larger than
the value of the rate downstream defined in the channel
profile, it will not be successful. The value 0 means
that no thre…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.6

vdsl2ChAlarmConfProfileMonitoringRateUs

The channel monitoring rate upstream.
Huawei defined. When the value you set is larger than
the value of the rate upstream defined in the channel
profile, it will not be successful. The value 0 means
that no threshold…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.7

vdsl2ChAlarmConfProfileRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.3.3.1.8

vdsl2ServProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.1 · 1 row entry · 34 columns

Open in standard view

The table vdsl2ServProfTable contains xDSL line
service configuration.
The index of this table is vdsl2ServProfName.  
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2ServProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.1.1

The table vdsl2ServProfTable contains xDSL line
service configuration.
The index of this entry is vdsl2ServProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor…

Indexes

vdsl2ServProfName

Column Syntax OID

vdsl2ServProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.1

vdsl2ServProfDataPathMode

This parameter indicates the VDSL2 line data path modes.
Options:
1. atm (1) - atm mode
2. ptm (2) - ptm mode

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathModeTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathModeType Enumeration

Type Values:

1	atm
2	ptm

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.2

vdsl2ServProfBitSwapEnablingDs

Enables or disables the bit swap downstream of a line.
Options:
1. enable(1) - Enable the bit swap downstream of a line
2. disable(2) - Disable the bit swap downstream of a line
huawei defined.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.3

vdsl2ServProfBitSwapEnablingUs

Enables or disables the bit swap upstream of a line.
Options:
1. enable(1) - Enable the bit swap upstream of a line.
2. disable(2) - Disable the bit swap upstream of a line.
huawei defined.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.4

vdsl2ServProfRaMode

The mode of operation of a rate-adaptive xTU-R in the transmit
direction.
Options:
1. manual (1) - No Rate-Adaptation. The initialization
process attempts to synchronize to a
…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2RaModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2RaMode Enumeration

Type Values:

1	manual
2	raInit
3	dynamic

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.5

vdsl2ServProfCh1Enabling

This parameter indicates whether the bearer 1 of VDSL2 line is enabling.
Options:
1. enable(1) - Enable the bearer 1 of VDSL2 line.
2. disable(2) - Disable the bearer 1 of VDSL2 line.
huawei defined.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnablingr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnabling Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.6

vdsl2ServProfCh1MinDataRateDs

If retransmission is not used in downstream direction,this parameter specifics
minimum data rate for the bearer channel on downstream direction. coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.7

vdsl2ServProfCh1MinDataRateUs

If retransmission is not used in upstream direction,this parameter specifics
minimum data rate for the bearer channel on upstream direction. coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.8

vdsl2ServProfCh1MinResDataRateDs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.9

vdsl2ServProfCh1MinResDataRateUs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.10

vdsl2ServProfCh1MaxDataRateDs

If retransmission is not used in downstream direction,this parameter specifics
maximum data rate for the bearer channel on downstream direction. coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.11

vdsl2ServProfCh1MaxDataRateUs

If retransmission is not used in upstream direction,this parameter specifics
maximum data rate for the bearer channel on upstream direction. coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.12

vdsl2ServProfCh1MinDataRateLowPwrDs

Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3).
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.13

vdsl2ServProfCh1MinDataRateLowPwrUs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.14

vdsl2ServProfCh1RaRatioDs

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.15

vdsl2ServProfCh1RaRatioUs

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.16

vdsl2ServProfCh2Enabling

This parameter indicates whether the bearer 2 of VDSL2 line is enabling.
Options:
1. enable(1) - Enable the bearer 2 of VDSL2 line.
2. disable(2) - Disable the bearer 2 of VDSL2 line.
huawei defined.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnablingr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnabling Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.17

vdsl2ServProfCh2MinDataRateDs

Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.18

vdsl2ServProfCh2MinDataRateUs

Minimum Data Rate on Upstream direction. The minimum net data
rate for the bearer channel, coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.19

vdsl2ServProfCh2MinResDataRateDs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.20

vdsl2ServProfCh2MinResDataRateUs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.21

vdsl2ServProfCh2MaxDataRateDs

Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.22

vdsl2ServProfCh2MaxDataRateUs

Maximum Data Rate on Upstream direction. The maximum net data
rate for the bearer channel, coded in bit/s.
Unit: bits/second

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.23

vdsl2ServProfCh2MinDataRateLowPwrDs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.24

vdsl2ServProfCh2MinDataRateLowPwrUs

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.25

vdsl2ServProfCh2RaRatioDs

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.26

vdsl2ServProfCh2RaRatioUs

percentsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.27

vdsl2ServProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.28

hwvdsl2ServProfMinEtrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.29

hwvdsl2ServProfMinEtrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.30

hwvdsl2ServProfMaxEtrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.31

hwvdsl2ServProfMaxEtrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.32

hwvdsl2ServProfMaxNdrRtxDs

If retransmission is used in downstream direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.33

hwvdsl2ServProfMaxNdrRtxUs

If retransmission is used in upstream direction, this parameter specifies the
maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s.

bits/secondUnsigned32r/w

Constraints:
range: 32000-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.34

vdsl2SpectrumProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.2 · 1 row entry · 11 columns

Open in standard view

The table vdsl2SpectrumProfTable contains VDSL2 line
spectrum configuration. 
The index of this table is vdsl2SpectrumProfName.  
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2SpectrumProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.2.1

The table vdsl2SpectrumProfTable contains VDSL2 line
spectrum configuration.
The index of this entry is vdsl2SpectrumProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set…

Indexes

vdsl2SpectrumProfName

Column Syntax OID

vdsl2SpectrumProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.1

vdsl2SpectrumProfXtuTransSysEna

xTU Transmission System Enabling (xTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the XTUs may apply …

HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeTyper/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2TransmissionModeType Bits

Type Values:

0	ansit1413
1	etsi
2	g9921PotsNonOverlapped
3	g9921PotsOverlapped
4	g9921IsdnNonOverlapped
5	g9921isdnOverlapped
6	g9921tcmIsdnNonOverlapped
7	g9921tcmIsdnOverlapped
8	g9922potsNonOverlapeed
9	g9922potsOverlapped
10	g9922tcmIsdnNonOverlapped
11	g9922tcmIsdnOverlapped
12	g9921tcmIsdnSymmetric
13	reserved1
14	reserved2
15	reserved3
16	reserved4
17	reserved5
18	g9923PotsNonOverlapped
19	g9923PotsOverlapped
20	g9923IsdnNonOverlapped
21	g9923isdnOverlapped
22	reserved6
23	reserved7
24	g9924potsNonOverlapeed
25	g9924potsOverlapped
26	reserved8
27	reserved9
28	g9923AnnexIAllDigNonOverlapped
29	g9923AnnexIAllDigOverlapped
30	g9923AnnexJAllDigNonOverlapped
31	g9923AnnexJAllDigOverlapped
32	g9924AnnexIAllDigNonOverlapped
33	g9924AnnexIAllDigOverlapped
34	g9923AnnexLMode1NonOverlapped
35	g9923AnnexLMode2NonOverlapped
36	g9923AnnexLMode3Overlapped
37	g9923AnnexLMode4Overlapped
38	g9923AnnexMPotsNonOverlapped
39	g9923AnnexMPotsOverlapped
40	g9925PotsNonOverlapped
41	g9925PotsOverlapped
42	g9925IsdnNonOverlapped
43	g9925isdnOverlapped
44	reserved10
45	reserved11
46	g9925AnnexIAllDigNonOverlapped
47	g9925AnnexIAllDigOverlapped
48	g9925AnnexJAllDigNonOverlapped
49	g9925AnnexJAllDigOverlapped
50	g9925AnnexMPotsNonOverlapped
51	g9925AnnexMPotsOverlapped
52	reserved12
53	reserved13
54	reserved14
55	reserved15
56	reserved16
57	reserved17
58	reserved18
59	reserved19
60	reserved20
61	reserved21
62	reserved22
63	reserved23
64	reserved24
65	reserved25
66	reserved26
67	reserved27
68	reserved28
69	reserved29
70	reserved30
71	reserved31
72	g9932AnnexAPots
73	g9932AnnexAIsdn
74	g9932AnnexBPots
75	g9932AnnexBIsdn
76	g9932AnnexCPots
77	g9932AnnexCIsdn
78	g9935
79	g9935FriendlyDs
80	g9935FullFriendly
81	reserved32

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.2

vdsl2SpectrumProfScMaskDs

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskDs OctetString

Type Constraints:
range: 0..64

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.3

vdsl2SpectrumProfScMaskUs

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ScMaskUs OctetString

Type Constraints:
range: 0..8

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.4

vdsl2SpectrumProfVDSLtoneblackout

OctetStringr/w

Constraints:
range: 0-79

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.5

vdsl2SpectrumProfRfiBands

OctetStringr/w

Constraints:
range: 0-159

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.6

vdsl2SpectrumProfRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.7

hwvdsl2SpectrumProfRtxModeDs

Enumerationr/w

Enumerated Values:

0	forbidden
1	preferred
2	forced
3	testmode

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.8

hwvdsl2SpectrumProfRtxModeUs

Enumerationr/w

Enumerated Values:

0	forbidden
1	preferred
2	forced
3	testmode

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.9

hwvdsl2SpectrumProfProfLeftrThreshDs

0.01Unsigned32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.10

hwvdsl2SpectrumProfProfLeftrThreshUs

0.01Unsigned32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.2011.6.115.1.5.4.2.1.11

vdsl2SpectrumProfModeSpecTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.3 · 1 row entry · 15 columns

Open in standard view

The table vdsl2SpectrumProfModeSpecTable extends the
VDSL2 line configuration profile by VDSL Mode Specific
parameters.
A row in this table that has an index of
vdsl2LconfProfVdslMode == defMode(1), is called a
'mandatory' row.
A row in this table that has an index such that
vdsl2LconfProfVdslMode is not equal to defMode(1),
is called an 'optional' row.
When a row in the vdsl2LineConfProfTable table
(the parent row) is created, the SNMP agent will
automatically create a 'mandatory' row in this table.
When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table.
Any attempt to delete the 'mandatory' row using the
vdsl2LConfProfModeSpecRowStatus attribute will be
rejected by the SNMP agent.
The manager MAY create an 'optional' row in this table
using the vdsl2LConfProfModeSpecRowStatus attribute if
the parent row exists.
The manager MAY delete an 'optional' row in this table
using the vdsl2LConfProfModeSpecRowStatus attribute at
any time.
If the actual transmission mode of a DSL line does not
match one of the 'optional' rows in this table, then
the line will use the PSD configuration from the
'mandatory' row.
The indexes of this table are vdsl2SpectrumProfName and 
vdsl2SpectrumProfXdslMode.

vdsl2SpectrumProfModeSpecEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.3.1

The table vdsl2SpectrumProfModeSpecTable extends the
VDSL2 line configuration profile by VDSL Mode Specific
parameters.
A row in this table that has an index of
vdsl2LconfProfVdslMode == defMode(1), is called a
'mandat…

Indexes

vdsl2SpectrumProfName vdsl2SpectrumProfXdslMode

Column Syntax OID

vdsl2SpectrumProfXdslMode

The xDSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares
the same PSD configuration.
There should be multiple entries in this table for a given
line profile i…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes Enumeration

Type Values:

1	defMode
2	adsl
3	adsl2Pots
4	adsl2Isdn
5	adsl2PlusPots
6	adsl2PlusIsdn
7	adsl2ReachExtended
8	vdsl2Pots
9	vdsl2Isdn

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.1

vdsl2SpectrumProfMaxNomPsdDs

0.1 dBm/HzInteger32r/w

Constraints:
range: -600--300

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.2

vdsl2SpectrumProfMaxNomPsdUs

0.1 dBm/HzInteger32r/w

Constraints:
range: -600--300

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.3

vdsl2SpectrumProfMaxNomAtpDs

The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values are 0 to 25.5 dBm, 256 to 510 physical va…

0.1 dBmUnsigned32r/w

Constraints:
range: 0-510

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.4

vdsl2SpectrumProfMaxNomAtpUs

The maximum nominal aggregate transmit power in the
upstream direction during initialization and Showtime. It
ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values are 0 to 25.5 dBm, 256 to 510 physical valu…

0.1 dBmUnsigned32r/w

Constraints:
range: 0-510

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.5

vdsl2SpectrumProfMaxAggRxPwrUs

0.1 dBmInteger32r/w

Constraints:
range: -255-255

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.6

vdsl2SpectrumProfPsdMaskDs

This configuration parameter defines the downstream PSD mask
applicable at the U-C2 reference point.
This MIB PSD mask may impose PSD restrictions in addition
to the Limit PSD mask defined in the relevant Recommendati…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDs OctetString

Type Constraints:
range: 0..96

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.7

vdsl2SpectrumProfPsdMaskUs

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUs OctetString

Type Constraints:
range: 0..48

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.8

vdsl2SpectrumProfUpsPsdMaskSelection

This configuration parameter defines which upstream PSD mask is enabled.
This parameter is used only for Annexes J and M of ITU T Recs G.992.3 and G.992.5.
As only one selection parameter is defined in the MIB,
the s…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpsPsdMaskSelectionr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpsPsdMaskSelection Enumeration

Type Values:

1	adlu32Eu32
2	adlu36Eu36
3	adlu40Eu40
4	adlu44Eu44
5	adlu48Eu48
6	adlu52Eu52
7	adlu56Eu56
8	adlu60Eu60
9	adlu64Eu64

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.9

vdsl2SpectrumProfPmMode

Power management state Enabling. Defines the power states the
ATU-C or ATU-R may autonomously transition to on this line.
Options:
1. allowTransitionsToIdle (0)
2. allowTransitionsToLowPower (1)
A bit with a '1' va…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2LConfProfPmModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2LConfProfPmMode Bits

Type Values:

0	allowTransitionsToIdle
1	allowTransitionsToLowPower

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.10

vdsl2SpectrumProfL0Time

This minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state. It ranges from 0
to 255 seconds.
Unit: seconds

secondsUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.11

vdsl2SpectrumProfL2Time

This minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State.
It ranges from 0 to 255 seconds.
Unit: seconds

secondsUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.12

vdsl2SpectrumProfL2Atpr

The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state.
Unit: dB

dBUnsigned32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.13

vdsl2SpectrumProfL2Atprt

dBUnsigned32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.14

vdsl2SpectrumProfModeSpecRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.15

vdsl2SpectrumProfSubProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.4 · 1 row entry · 7 columns

Open in standard view

The table vdsl2SpectrumProfSubProfTable extends the
VDSL2 line configuration profile by profile parameters.
The indexes of this table are vdsl2SpectrumProfName, 
vdsl2SpectrumProfXdslMode, and vdsl2SpectrumProfSubProfiles.

vdsl2SpectrumProfSubProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.4.1

The table vdsl2SpectrumProfSubProfTable extends the
VDSL2 line configuration profile by profile parameters.
The indexes of this entry are vdsl2SpectrumProfName,
vdsl2SpectrumProfXdslMode, and vdsl2SpectrumProfSubProfil…

Indexes

vdsl2SpectrumProfName vdsl2SpectrumProfXdslMode vdsl2SpectrumProfSubProfiles

Column Syntax OID

vdsl2SpectrumProfSubProfiles

This configuration parameter contains the G.993.2 profiles
to be allowed by the near-end xTU on this line.
This object is defaulted Profile17a.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfiles

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfiles Enumeration

Type Values:

-1	invalidValue
1	profile8a
2	profile8b
3	profile8c
4	profile8d
5	profile12a
6	profile12b
7	profile17a
8	profile30a

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.1

vdsl2SpectrumProfSubProfilesWeight

This configuration parameter contains the G.993.2 profiles' weight
to be allowed by the near-end xTU on this line. This object is defaulted
priorityWeight1.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfilesWeightr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SubProfilesWeight Enumeration

Type Values:

1	priorityWeight1
2	priorityWeight2
3	priorityWeight3

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.2

vdsl2SpectrumProfPsdClassMask

(CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each
…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2TIPsdClassMaskr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2TIPsdClassMask Enumeration

Type Values:

-1	invalidValue
1	none
2	a998B997M1cC998
3	b997M1x
4	b997M2x
5	b998M1x
6	b998M2x

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.3

vdsl2SpectrumProfPsdLimitMask

(LIMITMASK).
This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the
near-end xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Ann…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdLimitMaskr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdLimitMask Enumeration

Type Values:

1	annexA998-D-32
2	annexA998-D-64
3	annexB997-M1c-A-7
4	annexB997-M1x-M-8
5	annexB997-M1x-M
6	annexB997-M2x-M-8
7	annexB997-M2x-A
8	annexB997-M2x-M
9	annexB998-M1x-A
10	annexB998-M1x-B
11	annexB998-M1x-NUS0
12	annexB998-M2x-A
13	annexB998-M2x-M
14	annexB998-M2x-B
15	annexB998-M2x-NUS0
16	annexBHPE17-M1-NUS0
17	annexBHPE30-M1-NUS0
18	annexB997E17-M2x-A
19	annexB997E30-M2x-NUS0
20	annexB998E17-M2x-NUS0
21	annexB998E17-M2x-NUS0-M
22	annexB998ADE17-M2x-NUS0-M
23	annexB998ADE17-M2x-B
24	annexB998E30-M2x-NUS0
25	annexB998E30-M2x-NUS0-M
26	annexB998ADE30-M2x-NUS0-M
27	annexB998ADE17-M2x-A
28	annexB998ADE30-M2x-NUS0-A
29	annexA998-D-48
30	annexA998-D-128
31	annexB998ADE17-M2x-M

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.4

vdsl2SpectrumProfUs0PsdMask

This parameter contains the US0 PSD masks to be allowed by
the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A.
It is represented as a bitmap (0 if not allowed and 1 if allowed) with the f…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Us0PsdMaskr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Us0PsdMask Enumeration

Type Values:

1	adlu32Eu32
2	adlu36Eu36
3	adlu40Eu40
4	adlu44Eu44
5	adlu48Eu48
6	adlu52Eu52
7	adlu56Eu56
8	adlu60Eu60
9	adlu64Eu64
10	adlu128Eu128

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.5

vdsl2SpectrumProfUs0Disable

This configuration parameter indicates if the use of US0 is disabled
for each limit PSD mask enabled in the LIMITMASK parameter. This object is defaulted Unused.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2Us0Disabler/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2Us0Disable Enumeration

Type Values:

1	unused
2	used

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.6

vdsl2SpectrumProfSubProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.4.1.7

vdsl2DpboProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.5 · 1 row entry · 10 columns

Open in standard view

The table vdsl2DpboProfTable contains VDSL2 DPBO
configuration. 
The index of this table is vdsl2DpboProfName.   
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2DpboProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.5.1

The table vdsl2DpboProfTable contains VDSL2 DPBO
configuration.
The index of this entry is vdsl2DpboProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specif…

Indexes

vdsl2DpboProfName

Column Syntax OID

vdsl2DpboProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.1

vdsl2DpboProfWkMdMask

This configuration parameter defines the current enabled DPBO working mode mask.
DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2.
Options:
1. current enabled dpbo work mode:ADSL
2. current enabled dpbo work mode:ADS…

Unsigned32r/w

Constraints:
range: 0-511

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.2

vdsl2DpboProfEpsd

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEpsdr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEpsd OctetString

Type Constraints:
range: 0..48

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.3

vdsl2DpboProfEsel

0.5dBUnsigned32r/w

Constraints:
range: 0-511

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.4

vdsl2DpboProfEscm

HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEscmr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEscm OctetString

Type Constraints:
range: 0..6

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.5

vdsl2DpboProfMus

-0.5dBm/HzUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.6

vdsl2DpboProfFmin

4.3125 KHzUnsigned32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.7

vdsl2DpboProfFmax

4.3125 KHzUnsigned32r/w

Constraints:
range: 32-6956

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.8

vdsl2DpboProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.9

vdsl2DpboProfEselMin

0.5dBUnsigned32r/w

Constraints:
range: 0-511

.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.65535

vdsl2UpboProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.6 · 1 row entry · 8 columns

Open in standard view

The table vdsl2UpboProfTable contains VDSL2 upbo
configuration. The index of this table is vdsl2UpboProfName.  
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2UpboProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.6.1

The table vdsl2UpboProfTable contains VDSL2 upbo
configuration .
The index of this entry is vdsl2UpboProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-spec…

Indexes

vdsl2UpboProfName

Column Syntax OID

vdsl2UpboProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.1

vdsl2UpboProfPsdBand

This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band. A UPBOPSD defined for each band shall consist of two
parameters [a, b]. Parameter a shall be coded as an…

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBandr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand OctetString

Type Constraints:
range: 0..20

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2

vdsl2UpboProfKl

0.1 dBUnsigned32r/w

Constraints:
range: 0-1280

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.3

vdsl2UpboProfKlf

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlfr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlf Enumeration

Type Values:

1	forced
2	auto

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.4

vdsl2UpboProfKlAuto

This parameter defines the mode in which kl0 is computed when Vdsl2UpboKlf is auto.
The value is defined as below:
1-max(kl0CO,kl0CPE)
2-min(kl0CO,kl0CPE)
3-kl0CO
4-kl0CPE …

Unsigned32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.5

vdsl2UpboProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.6

vdsl2UpboProfBoostMode

This object indicates whether the equalized FEXT UPBO method is supported or not.
Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported
2. enable(2) - The Equalized FEXT UPBO method is supported

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostModer/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostMode Enumeration

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65535

vdsl2UpboProfKl0RefBand

Octets 0+1 - length[1]
Octets 2+3 - length[2]
Octets 4+5 - length[3]
Octets 6+7 - length[4]

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBandr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBand OctetString

Type Constraints:
range: 0..8

.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536

vdsl2NoiseMarginProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.7 · 1 row entry · 20 columns

Open in standard view

The table vdsl2NoiseMarginProfTable contains VDSL2 noise margin
configuration. 
The index of this table is vdsl2NoiseMarginProfName.  
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2NoiseMarginProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.7.1

The table vdsl2NoiseMarginProfTable contains VDSL2 noise margin
configuration.
The index of this entry is vdsl2NoiseMarginProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will b…

Indexes

vdsl2NoiseMarginProfName

Column Syntax OID

vdsl2NoiseMarginProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.1

vdsl2NoiseMarginProfTargetSnrmDs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.2

vdsl2NoiseMarginProfTargetSnrmUs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.3

vdsl2NoiseMarginProfMaxSnrmDs

0.1 dBSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.4

vdsl2NoiseMarginProfMaxSnrmUs

0.1 dBSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.5

vdsl2NoiseMarginProfMinSnrmDs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.6

vdsl2NoiseMarginProfMinSnrmUs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.7

vdsl2NoiseMarginProfRaUsNrmDs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.8

vdsl2NoiseMarginProfRaUsNrmUs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.9

vdsl2NoiseMarginProfRaUsTimeDs

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.10

vdsl2NoiseMarginProfRaUsTimeUs

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.11

vdsl2NoiseMarginProfRaDsNrmsDs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.12

vdsl2NoiseMarginProfRaDsNrmsUs

0.1 dBUnsigned32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.13

vdsl2NoiseMarginProfRaDsTimeDs

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.14

vdsl2NoiseMarginProfRaDsTimeUs

secondsUnsigned32r/w

Constraints:
range: 0-16383

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.15

vdsl2NoiseMarginProfDsThresholdDs

Data Rate Threshold Downshift for downstream direction. A
'Down-shift rate change' event is triggered when the actual
downstream data rate is below the data rate at the last entry
into Showtime, by more than the thresh…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.16

vdsl2NoiseMarginProfUsThresholdDs

Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the actual
downstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtim…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.17

vdsl2NoiseMarginProfDsThresholdUs

Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the actual
upstream data rate is below the data rate at the last entry
into Showtime, by more than the threshold.…

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.18

vdsl2NoiseMarginProfUsThresholdUs

Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the actual
upstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtime. …

bits/secondUnsigned32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.19

vdsl2NoiseMarginProfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.20

vdsl2DelayInpProfTable

table

.1.3.6.1.4.1.2011.6.115.1.5.4.8 · 1 row entry · 43 columns

Open in standard view

The table vdsl2DelayInpProfTable contains VDSL2 delay inp
configuration. The index of this table is vdsl2DelayInpProfName.  
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document.

vdsl2DelayInpProfEntry entry .1.3.6.1.4.1.2011.6.115.1.5.4.8.1

The table vdsl2DelayInpProfTable contains VDSL2 delay inp
configuration. The index of this entry is vdsl2DelayInpProfName.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to …

Indexes

vdsl2DelayInpProfName

Column Syntax OID

vdsl2DelayInpProfName

This object identifies a row in this table.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.1

vdsl2DelayInpProfForceINP

HUAWEI-VDSL2-LINE-TC-MIBVdsl2ForceINPr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2ForceINP Enumeration

Type Values:

1	force
2	auto

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.2

vdsl2DelayInpProfCh1MaxDelayDs

millisecondsUnsigned32r/w

Constraints:
range: 0-200

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.3

vdsl2DelayInpProfCh1MaxDelayUs

If retransmission is not used in upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual…

millisecondsUnsigned32r/w

Constraints:
range: 0-200

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.4

vdsl2DelayInpProfCh1MinProtectionDs

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.5

vdsl2DelayInpProfCh1MinProtectionUs

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.6

vdsl2DelayInpProfCh2MaxDelayDs

Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The XTUs shall choose the S (factor)
and D (depth) values such that the actual…

millisecondsUnsigned32r/w

Constraints:
range: 0-200

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.7

vdsl2DelayInpProfCh2MaxDelayUs

Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual one…

millisecondsUnsigned32r/w

Constraints:
range: 0-200

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.8

vdsl2DelayInpProfCh2MinProtectionDs

Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not req…

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.9

vdsl2DelayInpProfCh2MinProtectionUs

Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not requi…

symbolsHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.10

vdsl2DelayInpProfRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.11

vdsl2DelayInpProfCh1PhyRcontrolDs

To enable or disable the retransmission function on downstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.12

vdsl2DelayInpProfCh1PhyRcontrolUs

To enable or disable the retransmission function on upstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.13

vdsl2DelayInpProfCh1INPmaxDs

Maximum Impulse Noise Protection on downstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. fiveSymbols(7)
8. sixSymbols(8)
9. seven…

DMT SymbolHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.14

vdsl2DelayInpProfCh1INPmaxUs

Maximum Impulse Noise Protection on upstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. fiveSymbols(7)
8. sixSymbols(8)
9. sevenSy…

DMT SymbolHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.15

vdsl2DelayInpProfCh1MinRtxRatioDs

Minimum rtxratio on downstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.16

vdsl2DelayInpProfCh1MinRtxRatioUs

Minimum rtxratio on upstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.17

vdsl2DelayInpProfCh1MinRSoverheadDs

The minimum value of R/N on downstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.18

vdsl2DelayInpProfCh1MinRSoverheadUs

The minimum value of R/N on upstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.19

vdsl2DelayInpProfCh2PhyRcontrolDs

To enable or disable the retransmission function on downstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.20

vdsl2DelayInpProfCh2PhyRcontrolUs

To enable or disable the retransmission function on upstream direction.

HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControlr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.21

vdsl2DelayInpProfCh2INPmaxDs

DMT SymbolHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.22

vdsl2DelayInpProfCh2INPmaxUs

DMT SymbolHUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUsr/w

Textual Convention: HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs Enumeration

Type Values:

1	noProtection
2	halfSymbol
3	singleSymbol
4	twoSymbols
5	threeSymbols
6	fourSymbols
7	fiveSymbols
8	sixSymbols
9	sevenSymbols
10	eightSymbols
11	nineSymbols
12	tenSymbols
13	elevenSymbols
14	twelveSymbols
15	thirteenSymbols
16	fourteenSymbols
17	fifteenSymbols
18	sixteenSymbols

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.23

vdsl2DelayInpProfCh2MinRtxRatioDs

Minimum rtxratio on downstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.24

vdsl2DelayInpProfCh2MinRtxRatioUs

Minimum rtxratio on upstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.25

vdsl2DelayInpProfCh2MinRSoverheadDs

The minimum value of R/N on downstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.26

vdsl2DelayInpProfCh2MinRSoverheadUs

The minimum value of R/N on upstream direction.
Unit: 1/256

1/256Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.27

hwvdsl2DelayInpProfCh1MaxDelayRtxDs

millisecondsUnsigned32r/w

Constraints:
range: 1-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.28

hwvdsl2DelayInpProfCh1MaxDelayRtxUs

millisecondsUnsigned32r/w

Constraints:
range: 1-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.29

hwvdsl2DelayInpProfCh1MinDelayRtxDs

millisecondsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.30

hwvdsl2DelayInpProfCh1MinDelayRtxUs

millisecondsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.31

hwvdsl2DelayInpProfCh1MinInpShineRtxDs

symbolsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.32

hwvdsl2DelayInpProfCh1MinInpShineRtxUs

symbolsUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.33

hwvdsl2DelayInpProfCh1MinInp8ShineRtxDs

symbolsUnsigned32r/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.34

hwvdsl2DelayInpProfCh1MinInp8ShineRtxUs

symbolsUnsigned32r/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.35

hwvdsl2DelayInpProfCh1ShineRatioRtxDs

If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.36

hwvdsl2DelayInpProfCh1ShineRatioRtxUs

If retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.37

hwvdsl2DelayInpProfCh1MinInpReinRtxDs

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.38

hwvdsl2DelayInpProfCh1MinInpReinRtxUs

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.39

hwvdsl2DelayInpProfCh1MinInp8ReinRtxDs

Unsigned32r/w

Constraints:
range: 0-13

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.40

hwvdsl2DelayInpProfCh1MinInp8ReinRtxUs

Unsigned32r/w

Constraints:
range: 0-13

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.41

hwvdsl2DelayInpProfCh1IatReinRtxDs

Enumerationr/w

Enumerated Values:

0	frequency100Hz
1	frequency120Hz

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.42

hwvdsl2DelayInpProfCh1IatReinRtxUs

Enumerationr/w

Enumerated Values:

0	frequency100Hz
1	frequency120Hz

.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.43