vdsl2UpboProfPsdBand

HUAWEI-VDSL2-LINE-MIB · .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2
MIB view Table view

Object

column r/w HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand 
This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band. A UPBOPSD defined for each band shall consist of two 
parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz
(coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded
as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps 
of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal 
to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration
to disable UPBO in the respective upstream band.
Octets 0+1 -   a[0]
Octets 2+3 -   b[0]
Octets 4+5 -   a[1]
Octets 6+7 -   b[1]
Octets 8+9 -   a[2]
Octets 10+11 - b[2] 
Octets 12+13 - a[3]
Octets 14+15 - b[3]
Octets 16+17 - a[4]
Octets 18+19 - b[4]

Context

MIB
HUAWEI-VDSL2-LINE-MIB
OID
.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2
Type
column
Access
readwrite
Status
current
Parent
vdsl2UpboProfEntry
Table
vdsl2UpboProfTable
Siblings
7

Syntax

HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand
Source
HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..20

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vdsl2UpboProfName
This object identifies a row in this table.
columnOctetString.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.1
vdsl2UpboProfKl
This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (cod…
column0.1 dB Unsigned32.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.3
vdsl2UpboProfKlf
This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Oth…
columnHUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlf.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.4
vdsl2UpboProfKlAuto
This parameter defines the mode in which kl0 is computed when Vdsl2UpboKlf is auto. The value is defined as below: 1-max(kl0CO,kl0CPE) 2-min(kl0CO,kl0CPE) 3-kl0CO …
columnUnsigned32.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.5
vdsl2UpboProfRowStatus
This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.6
vdsl2UpboProfBoostMode
This object indicates whether the equalized FEXT UPBO method is supported or not. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Eq…
columnHUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostMode.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65535
vdsl2UpboProfKl0RefBand
Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4]
columnHUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBand.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536