vdsl2PMLHist1DInmaiat
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.16
Object
column
OctetString
This parameter is a count of the INMAIATi anomalies occurring on the line over the 24 hours accumulation period.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.4.1.4.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2PMLineHist1DayEntry
- Table
- vdsl2PMLineHist1DayTable
- Siblings
- 26
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2PMLHist1DUnit The termination unit. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.1 |
| vdsl2PMLHist1DLofs Count of seconds during this interval that there was Loss of Framing.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.10 |
| vdsl2PMLHist1DLols Count of seconds during this interval that there was Loss of Link.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.11 |
| vdsl2PMLHist1DLops Count of seconds during this interval that there was Loss of Power.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.12 |
| vdsl2PMLHist1DSosSuccess Count of the total number of successful SOS procedures initiated during this interval.
Unit: times | column | times SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.13 |
| vdsl2PMLHist1DInmainpeq This parameter is a count of the INMAINPEQi anomalies
occurring on the line over the 24 hours accumulation period. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.14 |
| vdsl2PMLHist1DInmame This parameter is a count of the INMAME anomalies
occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.15 |
| vdsl2PMLHist1DStartTime Start time of the historical 1-day performance statistics. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.17 |
| vdsl2PMLHist1DLeftrs If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 24 hours accumulation pe… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.18 |
| vdsl2PMLHist1DEfb If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 24 hours
accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.19 |
| vdsl2PMLHist1DInterval The interval number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.2 |
| vdsl2PMLHist1DMinEftr If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 24 hours accumulation perio… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.20 |
| hwvdsl2PMLHist1DSraDownShiftEvent This parameter is a count of sra downshift event occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.21 |
| hwvdsl2PMLHist1DSraUpShiftEvent This parameter is a count of sra upshift event occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.22 |
| hwvdsl2PMLHist1DDisorderLeavingEvent This parameter is a count of disorder leaving event occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.23 |
| hwvdsl2PMLHist1DLof This parameter is a count of loss of frame failure occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.24 |
| hwvdsl2PMLHist1DLos This parameter is a count of loss of signal failure occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.25 |
| hwvdsl2PMLHist1DLop This parameter is a count of loss of power failure occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.26 |
| hwvdsl2PMLHist1DLom This parameter is a count of loss of margin failure occurring on the line over the 24 hours accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.27 |
| vdsl2PMLHist1DMonitoredTime Total seconds monitored in this interval.
Unit: seconds | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.3 |
| vdsl2PMLHist1DFecs Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.4 |
| vdsl2PMLHist1DEs Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 … | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.5 |
| vdsl2PMLHist1DSes Count of seconds during this interval that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >> 1 OR LPR >= 1
xTU-R: (FEBE s… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.6 |
| vdsl2PMLHist1DLoss Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.7 |
| vdsl2PMLHist1DUas Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguou… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.8 |
| vdsl2PMLHist1DValidInterval This variable indicates if the data for this interval is
valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.115.1.4.1.4.1.9 |