vdsl2PMLHist15MUas

HUAWEI-VDSL2-LINE-MIB · .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8
MIB view Table view

Object

column seconds SNMPv2-SMICounter32 
Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored seconds.
Unit: seconds

Context

MIB
HUAWEI-VDSL2-LINE-MIB
OID
.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8
Type
column
Access
readonly
Status
current
Units
seconds
Parent
vdsl2PMLineHist15MinEntry
Table
vdsl2PMLineHist15MinTable
Siblings
26

Syntax

seconds SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vdsl2PMLHist15MUnit
The termination unit XTUC{1} or XTUR{2}.
columnHUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.1
vdsl2PMLHist15MLofs
Count of seconds in the interval when there was Loss of Framing. Unit: seconds
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.10
vdsl2PMLHist15MLols
Count of seconds in the interval when there was Loss of Link. Unit: seconds
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.11
vdsl2PMLHist15MLops
Count of seconds in the interval when there was Loss of Power. Unit: seconds
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.12
vdsl2PMLHist15MSosSuccess
Count of the total number of successful SOS procedures initiated in the interval. Unit: times
columntimes SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.13
vdsl2PMLHist15MInmainpeq
This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 15 minutes accumulation period.
columnOctetString.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.14
vdsl2PMLHist15MInmame
This parameter is a count of the INMAME anomalies occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.15
vdsl2PMLHist15MInmaiat
This parameter is a count of the INMAIATi anomalies occurring on the line over the 15 minutes accumulation period.
columnOctetString.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.16
vdsl2PMLHist15MStartTime
Start time of the historical 15-minute performance statistics.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17
vdsl2PMLHist15MLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 minutes accumulation …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.18
vdsl2PMLHist15MEfb
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.19
vdsl2PMLHist15MInterval
The interval number.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.2
vdsl2PMLHist15MMinEftr
If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation per…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.20
hwvdsl2PMLHist15MSraDownShiftEvent
This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.21
hwvdsl2PMLHist15MSraUpShiftEvent
This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.22
hwvdsl2PMLHist15MDisorderLeavingEvent
This parameter is a count of disorder leaving event occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.23
hwvdsl2PMLHist15MLof
This parameter is a count of loss of frame failure occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.24
hwvdsl2PMLHist15MLos
This parameter is a count of loss of signal failure occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.25
hwvdsl2PMLHist15MLop
This parameter is a count of loss of power failure occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.26
hwvdsl2PMLHist15MLom
This parameter is a count of loss of margin failure occurring on the line over the 15 minutes accumulation period.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.27
vdsl2PMLHist15MMonitoredTime
Total seconds monitored in this interval. Unit: seconds
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.3
vdsl2PMLHist15MFecs
Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES…
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.4
vdsl2PMLHist15MEs
Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEBE >= 1 …
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.5
vdsl2PMLHist15MSes
Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE summ…
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.6
vdsl2PMLHist15MLoss
Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds
columnseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.7
vdsl2PMLHist15MValidInterval
This variable indicates if the data for this interval is valid.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.9