vdsl2NoiseMarginProfRaDsTimeUs
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.15
Object
column
r/w
seconds Unsigned32
The Upstream Down-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-shift Noise Margin before the xTU-C shall attempt to decrease the upstream net data rate. Unit: seconds
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.4.7.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- vdsl2NoiseMarginProfEntry
- Table
- vdsl2NoiseMarginProfTable
- Siblings
- 19
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-16383
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2NoiseMarginProfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.1 |
| vdsl2NoiseMarginProfRaUsTimeDs The Downstream Up-Shift Time Interval, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of
time that the downstream noise margin should stay above the
Down… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.10 |
| vdsl2NoiseMarginProfRaUsTimeUs The Upstream Up-Shift Time Interval, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of
time the upstream noise margin should stay above the
Upstream Up-s… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.11 |
| vdsl2NoiseMarginProfRaDsNrmsDs The Downstream Down-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream
noise margin is below this value and stays below that f… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.12 |
| vdsl2NoiseMarginProfRaDsNrmsUs The Upstream Downshift Noise Margin value, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream
noise margin is below this value and stays below that for mo… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.13 |
| vdsl2NoiseMarginProfRaDsTimeDs The Downstream Downshift Time Interval, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of
time the downstream noise margin should stay below the
Downstre… | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.14 |
| vdsl2NoiseMarginProfDsThresholdDs Data Rate Threshold Downshift for downstream direction. A
'Down-shift rate change' event is triggered when the actual
downstream data rate is below the data rate at the last entr… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.16 |
| vdsl2NoiseMarginProfUsThresholdDs Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the actual
downstream data rate exceeds, by more than the threshold, the
… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.17 |
| vdsl2NoiseMarginProfDsThresholdUs Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the actual
upstream data rate is below the data rate at the last entry
in… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.18 |
| vdsl2NoiseMarginProfUsThresholdUs Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the actual
upstream data rate exceeds, by more than the threshold, the
data… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.19 |
| vdsl2NoiseMarginProfTargetSnrmDs The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.2 |
| vdsl2NoiseMarginProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.20 |
| vdsl2NoiseMarginProfTargetSnrmUs The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization.
The t… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.3 |
| vdsl2NoiseMarginProfMaxSnrmDs The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.4 |
| vdsl2NoiseMarginProfMaxSnrmUs The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
… | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.5 |
| vdsl2NoiseMarginProfMinSnrmDs The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.6 |
| vdsl2NoiseMarginProfMinSnrmUs The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.7 |
| vdsl2NoiseMarginProfRaUsNrmDs The Downstream Up-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream
noise margin is above this value and stays above it for
m… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.8 |
| vdsl2NoiseMarginProfRaUsNrmUs The Upstream Up-Shift Noise Margin value, to be used when
Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream
noise margin is above this value and stays above it for more
… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.7.1.9 |