vdsl2SpectrumProfL2Time
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.12
Object
column
r/w
seconds Unsigned32
This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Unit: seconds
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.4.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- vdsl2SpectrumProfModeSpecEntry
- Table
- vdsl2SpectrumProfModeSpecTable
- Siblings
- 14
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2SpectrumProfXdslMode The xDSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares
the same PSD configuration.
There should be multiple entries … | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.1 |
| vdsl2SpectrumProfPmMode Power management state Enabling. Defines the power states the
ATU-C or ATU-R may autonomously transition to on this line.
Options:
1. allowTransitionsToIdle (0)
2. allowTransit… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2LConfProfPmMode | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.10 |
| vdsl2SpectrumProfL0Time This minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state. It ranges from 0
to 255 seconds.
Unit: seconds | column | seconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.11 |
| vdsl2SpectrumProfL2Atpr The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state.
Unit: dB | column | dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.13 |
| vdsl2SpectrumProfL2Atprt The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2… | column | dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.14 |
| vdsl2SpectrumProfModeSpecRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.15 |
| vdsl2SpectrumProfMaxNomPsdDs The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.2 |
| vdsl2SpectrumProfMaxNomPsdUs The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 d… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.3 |
| vdsl2SpectrumProfMaxNomAtpDs The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values a… | column | 0.1 dBm Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.4 |
| vdsl2SpectrumProfMaxNomAtpUs The maximum nominal aggregate transmit power in the
upstream direction during initialization and Showtime. It
ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical
values are… | column | 0.1 dBm Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.5 |
| vdsl2SpectrumProfMaxAggRxPwrUs The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
re… | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.6 |
| vdsl2SpectrumProfPsdMaskDs This configuration parameter defines the downstream PSD mask
applicable at the U-C2 reference point.
This MIB PSD mask may impose PSD restrictions in addition
to the Limit PSD m… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDs | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.7 |
| vdsl2SpectrumProfPsdMaskUs This configuration parameter defines the upstream PSD
mask applicable at the U R2 reference point. This MIB
PSD mask may impose PSD restrictions in addition to the
Limit PSD ma… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUs | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.8 |
| vdsl2SpectrumProfUpsPsdMaskSelection This configuration parameter defines which upstream PSD mask is enabled.
This parameter is used only for Annexes J and M of ITU T Recs G.992.3 and G.992.5.
As only one selection… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpsPsdMaskSelection | .1.3.6.1.4.1.2011.6.115.1.5.4.3.1.9 |