vdsl2DelayInpProfCh2MinProtectionDs
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.9
Object
Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.4.8.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- symbols
- Parent
- vdsl2DelayInpProfEntry
- Table
- vdsl2DelayInpProfTable
- Siblings
- 42
Syntax
symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs
- Source
- HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs
- Base type
Enumeration
Values & Constraints
Type Values
1 | noProtection |
2 | halfSymbol |
3 | singleSymbol |
4 | twoSymbols |
5 | threeSymbols |
6 | fourSymbols |
7 | fiveSymbols |
8 | sixSymbols |
9 | sevenSymbols |
10 | eightSymbols |
11 | nineSymbols |
12 | tenSymbols |
13 | elevenSymbols |
14 | twelveSymbols |
15 | thirteenSymbols |
16 | fourteenSymbols |
17 | fifteenSymbols |
18 | sixteenSymbols |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2DelayInpProfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.1 |
| vdsl2DelayInpProfCh2MinProtectionUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
v… | column | symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.10 |
| vdsl2DelayInpProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.11 |
| vdsl2DelayInpProfCh1PhyRcontrolDs To enable or disable the retransmission function on downstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.12 |
| vdsl2DelayInpProfCh1PhyRcontrolUs To enable or disable the retransmission function on upstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.13 |
| vdsl2DelayInpProfCh1INPmaxDs Maximum Impulse Noise Protection on downstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. … | column | DMT Symbol HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.14 |
| vdsl2DelayInpProfCh1INPmaxUs Maximum Impulse Noise Protection on upstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. fi… | column | DMT Symbol HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.15 |
| vdsl2DelayInpProfCh1MinRtxRatioDs Minimum rtxratio on downstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.16 |
| vdsl2DelayInpProfCh1MinRtxRatioUs Minimum rtxratio on upstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.17 |
| vdsl2DelayInpProfCh1MinRSoverheadDs The minimum value of R/N on downstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.18 |
| vdsl2DelayInpProfCh1MinRSoverheadUs The minimum value of R/N on upstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.19 |
| vdsl2DelayInpProfForceINP This parameter indicates that the framer settings of the
bearer shall be selected such that the impulse noise protection
computed according to the formula specified in the relev… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ForceINP | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.2 |
| vdsl2DelayInpProfCh2PhyRcontrolDs To enable or disable the retransmission function on downstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.20 |
| vdsl2DelayInpProfCh2PhyRcontrolUs To enable or disable the retransmission function on upstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.21 |
| vdsl2DelayInpProfCh2INPmaxDs Maximum Impulse Noise Protection on downstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. … | column | DMT Symbol HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.22 |
| vdsl2DelayInpProfCh2INPmaxUs Maximum Impulse Noise Protection on upstream direction.
Options:
1. noProtection(1)
2. halfSymbol(2)
3. singleSymbol(3)
4. twoSymbols(4)
5. threeSymbols(5)
6. fourSymbols(6)
7. fi… | column | DMT Symbol HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.23 |
| vdsl2DelayInpProfCh2MinRtxRatioDs Minimum rtxratio on downstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.24 |
| vdsl2DelayInpProfCh2MinRtxRatioUs Minimum rtxratio on upstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.25 |
| vdsl2DelayInpProfCh2MinRSoverheadDs The minimum value of R/N on downstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.26 |
| vdsl2DelayInpProfCh2MinRSoverheadUs The minimum value of R/N on upstream direction.
Unit: 1/256 | column | 1/256 Integer32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.27 |
| hwvdsl2DelayInpProfCh1MaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.28 |
| hwvdsl2DelayInpProfCh1MaxDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.29 |
| vdsl2DelayInpProfCh1MaxDelayDs If retransmission is not used in downstream direction,this parameter
is maximum interleave delay on downstream direction. The maximum
one-way interleaving delay introduced by the … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.3 |
| hwvdsl2DelayInpProfCh1MinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.30 |
| hwvdsl2DelayInpProfCh1MinDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.31 |
| hwvdsl2DelayInpProfCh1MinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.32 |
| hwvdsl2DelayInpProfCh1MinInpShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.33 |
| hwvdsl2DelayInpProfCh1MinInp8ShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.34 |
| hwvdsl2DelayInpProfCh1MinInp8ShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.35 |
| hwvdsl2DelayInpProfCh1ShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.36 |
| hwvdsl2DelayInpProfCh1ShineRatioRtxUs If retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.37 |
| hwvdsl2DelayInpProfCh1MinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.38 |
| hwvdsl2DelayInpProfCh1MinInpReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.39 |
| vdsl2DelayInpProfCh1MaxDelayUs If retransmission is not used in upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) a… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.4 |
| hwvdsl2DelayInpProfCh1MinInp8ReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.40 |
| hwvdsl2DelayInpProfCh1MinInp8ReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.41 |
| hwvdsl2DelayInpProfCh1IatReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - … | column | Enumeration | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.42 |
| hwvdsl2DelayInpProfCh1IatReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an … | column | Enumeration | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.43 |
| vdsl2DelayInpProfCh1MinProtectionDs If retransmission is not used in downstream direction,this parameter
is minimum impulse noise protection for the bearer channel on downstream
direction. The minimum impulse noise … | column | symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.5 |
| vdsl2DelayInpProfCh1MinProtectionUs If retransmission is not used in upstream direction,this parameter
is minimum impulse noise protection for the bearer channel on upstream
direction. The minimum impulse noise prot… | column | symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.6 |
| vdsl2DelayInpProfCh2MaxDelayDs Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The XTUs shall choose the S (factor)
a… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.7 |
| vdsl2DelayInpProfCh2MaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) and
D… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.8.1.8 |