hwVdsl2ConfProfVirtualNoiseUs

HUAWEI-VDSL2-LINE-MIB · .1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65538

Object

column r/w HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseUs

This configuration parameter defines the upstream 
transmitter referred virtual noise (TXREFVNus). 
The TXREFVNus shall be specified through a set of breakpoints. 
Each breakpoint shall consist of a subcarrier index t, 
with a subcarrier spacing of 4.3125 kHz, and a noise PSD level
(expressed in dBm/Hz) at that subcarrier. 
The set of breakpoints can then be represented as 
[(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]. 
The subcarrier index shall be coded as an unsigned integer. 
The noise level shall be coded as an 8-bit unsigned integer 
representing the noise level -40 dBm/Hz (coded as 0) to -140 dBm/Hz 
(coded as 200), in steps of 0.5 dBm/Hz.
Values from 201 to 255 are special values indicating 
a noise level of 0 W/Hz. The maximum number of breakpoints is 16.

Context

MIB: HUAWEI-VDSL2-LINE-MIB
OID: .1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65538
Type: column
Access: readwrite
Status: current
Parent: vdsl2LineConfProfModeSpecEntry
Table: vdsl2LineConfProfModeSpecTable
Siblings: 17

Syntax

HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseUs

Source: HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseUs
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..48

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vdsl2LconfProfVdslMode The VDSL Mode is a way of categorizing the various VDSL transmission modes into groups, each group (VDSL Mode) shares the same PSD configuration. There should be multiple entries …	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2OperationModes	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.1`
vdsl2LConfProfPSDClassMask In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-64. - Class 997-M1…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.10`
vdsl2LConfProfProfiles This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line.	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.11`
vdsl2LConfProfBandOptUsage Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - indicates Opt is unused 2. used(2) - indicates Opt …	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2BandOptUsage	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.12`
vdsl2LConfProfModeSpecRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'acti…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.13`
vdsl2LConfProfMaxNomPsdDs The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30…	column	0.1 dBm/Hz Integer32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.2`
vdsl2LConfProfMaxNomPsdUs The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 d…	column	0.1 dBm/Hz Integer32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.3`
vdsl2LConfProfMaxNomAtpDs The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values…	column	0.1 dBm Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.4`
vdsl2LConfProfMaxNomAtpUs The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values a…	column	0.1 dBm Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.5`
vdsl2LConfProfMaxAggRxPwrUs The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximum aggregate re…	column	0.1 dBm Integer32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.6`
hwVdsl2ConfProfVirtualNoiseModeDs This parameter enables the transmitter referred virtual noise in the downstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual noise is enabled.	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoise	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65535`
hwVdsl2ConfProfVirtualNoiseModeUs This parameter enables the transmitter referred virtual noise in the upstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual noise is enabled.	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoise	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65536`
hwVdsl2ConfProfVirtualNoiseDs This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoints. Each breakpoi…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2VirtualNoiseDs	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65537`
hwVdsl2ConfProfAutoProfile Enable or disable the G.993.2 profiles adaptive function. If set to 1, the G.993.2 profiles adaptive function is disabled. If set to 2, the G.993.2 profiles adaptive function is…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2AutoProfile	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65539`
vdsl2LConfProfPsdMaskDs This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD m…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskDs	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.7`
vdsl2LConfProfPsdMaskUs This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD ma…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2PsdMaskUs	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.8`
vdsl2LConfProfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in vdsl2LConfP…	column	Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.1.3.1.9`