vdsl2PMLHist15MStartTime
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17
Object
column
SNMPv2-TCDateAndTime
Start time of the historical 15-minute performance statistics.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2PMLineHist15MinEntry
- Table
- vdsl2PMLineHist15MinTable
- Siblings
- 26
Values & Constraints
Type Constraints
range: 8
range: 11
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2PMLHist15MUnit The termination unit XTUC{1} or XTUR{2}. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.1 |
| vdsl2PMLHist15MLofs Count of seconds in the interval when there was Loss of Framing.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.10 |
| vdsl2PMLHist15MLols Count of seconds in the interval when there was Loss of Link.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.11 |
| vdsl2PMLHist15MLops Count of seconds in the interval when there was Loss of Power.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.12 |
| vdsl2PMLHist15MSosSuccess Count of the total number of successful SOS procedures initiated in the interval.
Unit: times | column | times SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.13 |
| vdsl2PMLHist15MInmainpeq This parameter is a count of the INMAINPEQi anomalies
occurring on the line over the 15 minutes accumulation period. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.14 |
| vdsl2PMLHist15MInmame This parameter is a count of the INMAME anomalies
occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.15 |
| vdsl2PMLHist15MInmaiat This parameter is a count of the INMAIATi anomalies
occurring on the line over the 15 minutes accumulation period. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.16 |
| vdsl2PMLHist15MLeftrs If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 15 minutes accumulation … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.18 |
| vdsl2PMLHist15MEfb If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 15 minutes
accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.19 |
| vdsl2PMLHist15MInterval The interval number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.2 |
| vdsl2PMLHist15MMinEftr If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 15 minutes accumulation per… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.20 |
| hwvdsl2PMLHist15MSraDownShiftEvent This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.21 |
| hwvdsl2PMLHist15MSraUpShiftEvent This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.22 |
| hwvdsl2PMLHist15MDisorderLeavingEvent This parameter is a count of disorder leaving event occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.23 |
| hwvdsl2PMLHist15MLof This parameter is a count of loss of frame failure occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.24 |
| hwvdsl2PMLHist15MLos This parameter is a count of loss of signal failure occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.25 |
| hwvdsl2PMLHist15MLop This parameter is a count of loss of power failure occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.26 |
| hwvdsl2PMLHist15MLom This parameter is a count of loss of margin failure occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.27 |
| vdsl2PMLHist15MMonitoredTime Total seconds monitored in this interval.
Unit: seconds | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.3 |
| vdsl2PMLHist15MFecs Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.4 |
| vdsl2PMLHist15MEs Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 … | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.5 |
| vdsl2PMLHist15MSes Count of seconds during this interval that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE summ… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.6 |
| vdsl2PMLHist15MLoss Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.7 |
| vdsl2PMLHist15MUas Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguou… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8 |
| vdsl2PMLHist15MValidInterval This variable indicates if the data for this interval is
valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.115.1.4.1.3.1.9 |