vdsl2PMLineCurr15MStartTime
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.44
Object
column
SNMPv2-TCDateAndTime
Start time of the current 15-minute performance statistics.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.4.1.1.1.44- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2PMLineCurrEntry
- Table
- vdsl2PMLineCurrTable
- Siblings
- 74
Values & Constraints
Type Constraints
range: 8
range: 11
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2PMLCurrUnit The termination unit XTUC{1} or XTUR{2}. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.1 |
| vdsl2PMLCurr1DayValidIntervals Valid intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.10 |
| vdsl2PMLCurr1DayInvalidIntervals Invalid intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.11 |
| vdsl2PMLCurr1DayTimeElapsed Total elapsed seconds in this interval.
Unit: seconds | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.12 |
| vdsl2PMLCurr1DayFecs Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.13 |
| vdsl2PMLCurr1DayEs Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 … | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.14 |
| vdsl2PMLCurr1DaySes Count of seconds during this interval that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE summ… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.15 |
| vdsl2PMLCurr1DayLoss Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.16 |
| vdsl2PMLCurr1DayUas Count of seconds in Unavailability State during this interval.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguou… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.17 |
| vdsl2PMLEverBeforeFecs Count of seconds since agent reset that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.
Hu… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.18 |
| vdsl2PMLEverBeforeEs Count of seconds since agent reset that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: FEBE >= 1 for… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.19 |
| vdsl2PMLCurrValidIntervals Valid intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.2 |
| vdsl2PMLEverBeforeSes Count of seconds since agent reset that there was:
xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR
LOS >= 1 OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE summed … | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.20 |
| vdsl2PMLEverBeforeLoss Count of seconds since agent reset that there was LOS (or
LOS-FE for xTU-R).
Huawei defined.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.21 |
| vdsl2PMLEverBeforeUas Count of seconds in Unavailability State since agent reset.
Unavailability begins at the onset of 10 contiguous severely
-errored seconds, and ends at the onset of 10 contiguous
s… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.22 |
| vdsl2PMLCurr15MLofs Count of seconds in the current 15 minute interval when there was Loss of Framing.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.23 |
| vdsl2PMLCurr15MLols Count of seconds in the current 15 minute interval when there was Loss of Link.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.24 |
| vdsl2PMLCurr15MLops Count of seconds in the current 15 minute interval when there was Loss of Power.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.25 |
| vdsl2PMLCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the current day.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.26 |
| vdsl2PMLCurr1DayLols Count of the number of seconds when there was Loss of Link during the current day.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.27 |
| vdsl2PMLCurr1DayLops Count of the number of seconds when there was Loss of Power during the current day.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.28 |
| vdsl2PMLEverBeforeLofs Count of the number of seconds when there was Loss of Framing since agent reset.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.29 |
| vdsl2PMLCurrInvalidIntervals Invalid intervals. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.3 |
| vdsl2PMLEverBeforeLols Count of the number of seconds when there was Loss of Link since agent reset.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.30 |
| vdsl2PMLEverBeforeLops Count of the number of seconds when there was Loss of Power since agent reset.
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.31 |
| vdsl2PMLCurr15MSosSuccess Count of the total number of successful SOS procedures initiated in the current 15 minute.
Unit: times | column | times SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.32 |
| vdsl2PMLCurr1DaySosSuccess Count of the total number of successful SOS procedures initiated during the current day.
Unit: times | column | times SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.33 |
| vdsl2PMLEverBeforeSosSuccess Count of the total number of successful SOS procedures initiated since agent reset.
Unit: times | column | times SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.34 |
| vdsl2PMLCurr15MInmainpeq This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 15 minutes. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.35 |
| vdsl2PMLCurr15MInmame This parameter is a count of the INMAME anomalies
occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.36 |
| vdsl2PMLCurr15MInmaiat This parameter is a count of the INMAIATi anomalies
occurring on the line during current 15 minutes. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.37 |
| vdsl2PMLCurr1DayInmainpeq This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 1 day. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.38 |
| vdsl2PMLCurr1DayInmame This parameter is a count of the INMAME anomalies
occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.39 |
| vdsl2PMLCurr15MTimeElapsed Total elapsed seconds in this interval.
Unit: seconds | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.4 |
| vdsl2PMLCurr1DayInmaiat This parameter is a count of the INMAIATi anomalies
occurring on the line during current 1 day. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.40 |
| vdsl2PMLEverBeforeInmainpeq This parameter is a count of the INMAINPEQi anomalies
occurring on the line ever before. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.41 |
| vdsl2PMLEverBeforeInmame This parameter is a count of the INMAME anomalies
occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.42 |
| vdsl2PMLEverBeforeInmaiat This parameter is a count of the INMAIATi anomalies
occurring on the line ever before. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.43 |
| vdsl2PMLineCurr1DayStartTime Start time of the current 1-day performance statistics. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.45 |
| vdsl2PMLCurr15MLeftrs If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 15 minutes accumulation … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.46 |
| vdsl2PMLCurr15MEfb If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 15 minutes
accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.47 |
| vdsl2PMLCurr15MMinEftr If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 15 minutes accumulation per… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.48 |
| vdsl2PMLCurr1DayLeftrs If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
over the 24 hours accumulation pe… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.49 |
| vdsl2PMLCurr15MFecs Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.5 |
| vdsl2PMLCurr1DayEfb If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the 24 hours
accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.50 |
| vdsl2PMLCurr1DayMinEftr If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
over the 24 hours accumulation perio… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.51 |
| vdsl2PMLEverBeforeLeftrs If retransmission is used in a given transmit direction, this parameter
is a count of the seconds with a near-end leftr defect present observed
ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.52 |
| vdsl2PMLEverBeforeEfb If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.53 |
| vdsl2PMLEverBeforeMinEftr If retransmission is used in a given transmit direction, this parameter
reports the minimum of the EFTR(Error-free throughput rate) observed
ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.54 |
| hwvdsl2PMLEverBeforeSraDownShiftEvent This parameter is a count of sra downshift event occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.55 |
| hwvdsl2PMLEverBeforeSraUpShiftEvent This parameter is a count of sra upshift event occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.56 |
| hwvdsl2PMLCurr15MSraDownShiftEvent This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.57 |
| hwvdsl2PMLCurr15MSraUpShiftEvent This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.58 |
| hwvdsl2PMLCurr1DaySraDownShiftEvent This parameter is a count of sra downshift event occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.59 |
| vdsl2PMLCurr15MEs Count of seconds during this interval that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1
xTU-R: FEBE >= 1 f… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.6 |
| hwvdsl2PMLCurr1DaySraUpShiftEvent This parameter is a count of sra upshift event occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.60 |
| hwvdsl2PMLEverBeforeDisorderLeavingEvent This parameter is a count of disorder leaving event occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.61 |
| hwvdsl2PMLEverBeforeLof This parameter is a count of loss of frame failure occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.62 |
| hwvdsl2PMLEverBeforeLos This parameter is a count of loss of signal failure occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.63 |
| hwvdsl2PMLEverBeforeLop This parameter is a count of loss of power failure occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.64 |
| hwvdsl2PMLEverBeforeLom This parameter is a count of loss of margin failure occurring on the line ever before. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.65 |
| hwvdsl2PMLCurr15MDisorderLeavingEvent This parameter is a count of disorder leaving event occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.66 |
| hwvdsl2PMLCurr1DayDisorderLeavingEvent This parameter is a count of disorder leaving event occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.67 |
| hwvdsl2PMLCurr15MLof This parameter is a count of loss of frame failure occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.68 |
| hwvdsl2PMLCurr15MLos This parameter is a count of loss of signal failure occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.69 |
| vdsl2PMLCurr15MSes Count of seconds during this interval that there was:
xTU-C: If G.998.4 is supported and retransmission is enabled
in the near-end received direction, a SES is declared … | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7 |
| hwvdsl2PMLCurr15MLop This parameter is a count of loss of power failure occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.70 |
| hwvdsl2PMLCurr15MLom This parameter is a count of loss of margin failure occurring on the line during current 15 minutes. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.71 |
| hwvdsl2PMLCurr1DayLof This parameter is a count of loss of frame failure occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.72 |
| hwvdsl2PMLCurr1DayLos This parameter is a count of loss of signal failure occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.73 |
| hwvdsl2PMLCurr1DayLop This parameter is a count of loss of power failure occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.74 |
| hwvdsl2PMLCurr1DayLom This parameter is a count of loss of margin failure occurring on the line during current 1 day. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.75 |
| vdsl2PMLCurr15MLoss Count of seconds during this interval that there was LOS (or
LOS-FE for xTU-R).
Unit: seconds | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.8 |
| vdsl2PMLCurr15MUas Count of seconds in Unavailability State during this
interval. Unavailability begins at the onset of 10
contiguous severely-errored seconds, and ends at the
onset of 10 contiguou… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.115.1.4.1.1.1.9 |