vdsl2SCStatusLogScGroupSize
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.2.3.1.5
Object
column
Unsigned32
Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.2.3.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2SCStatusEntry
- Table
- vdsl2SCStatusTable
- Siblings
- 13
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-2
range: 4-4
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2SCStatusDirection The direction of the sub-carrier either
upstream or downstream | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction | .1.3.6.1.4.1.2011.6.115.1.2.3.1.1 |
| vdsl2SCStatusAttainableRate Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the XTU-C transmitter and XTU-R
receiver (when referring to downstream direction) or by the
XTU-R … | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.10 |
| vdsl2SCStatusActAtp Actual Aggregate Transmit Power from the XTU (XTU-R on
downstream direction and XTU-C on upstream direction), at the
instant of measurement. It ranges from -310 to 310 units of
0… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.11 |
| vdsl2SCStatusRowStatus Row Status. The SNMP agent should create rows in this
table and in the vdsl2SCStatusTable for storing the results
of a DELT performed on the associated line, if such rows
do not … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.2.3.1.12 |
| vdsl2SCStatusProfile This configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles | .1.3.6.1.4.1.2011.6.115.1.2.3.1.13 |
| vdsl2SCStatusClassmask In order to reduce the number of configuration possibilities,
the limit PSD masks are grouped in the following PSD mask classes:
- Class 998 Annex A: D-32, D-64.
- Class 997-M1… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask | .1.3.6.1.4.1.2011.6.115.1.2.3.1.14 |
| vdsl2SCStatusLinScale The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic
procedu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.2 |
| vdsl2SCStatusLinScGroupSize Number of sub-carriers per group used to report the H(f)
linear representation values for the respective transmission
direction. The valid values are 1, 2, 4 and 8. For ADSL, this… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.3 |
| vdsl2SCStatusLogMt The number of symbols used to measure the H(f) logarithmic
measurement values for the respective transmission direction.
This parameter should correspond to the value specified in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.4 |
| vdsl2SCStatusQlnMt The number of symbols used to measure the Quiet Line Noise
values on the respective transmission direction. This
parameter should correspond to the value specified in the
recomm… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.6 |
| vdsl2SCStatusQlnScGroupSize Number of sub-carriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.7 |
| vdsl2SCStatusMtime SNR Measurement Time. The number of symbols used to
measure the SNR values on the respective transmission
direction. It should correspond to the value specified in the
recommend… | column | symbols SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.8 |
| vdsl2SCStatusSnrScGroupSize Number of sub-carriers per group used to report the SNR
values on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to o… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.9 |