vdsl2ChStatusPtmStatus
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.2.1.1.7
Object
column
HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus
Indicates current state (existing failures) of the VDSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. Options: 1. noFailure(0) - No failure 2. outOfSync (1) - Out of synchronization In case the channel is not of PTM Data Path the object is set to '0'.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.2.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2ChannelStatusEntry
- Table
- vdsl2ChannelStatusTable
- Siblings
- 19
Syntax
HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus
- Source
- HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus
- Base type
Bits
Values & Constraints
Type Values
0 | noDefect |
1 | outOfSync |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2ChStatusUnit The termination unit xTU-C(1) or xTU-R(2). | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit | .1.3.6.1.4.1.2011.6.115.1.2.1.1.1 |
| vdsl2ChStatusRSSymbols The DMT Symbol number per codeword used in
the latency path in which the bearer channel
is transported. The invalid value is 4294967295.
If data on the port is invalid or no dat… | column | 0.01 DMT symbol SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.10 |
| vdsl2ChStatusInterDepth The actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported.
The value ranges from 1 to 4096 by step of 1.
The value 1 indicates n… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.11 |
| vdsl2ChStatusSymbolLength The actual number of bits per symbol assigned
to the latency path in which the bearer channel
is transported.
This value does not include trellis overhead. The invalid
value is… | column | bit Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.12 |
| vdsl2ChStatusRSSize The actual Reed-Solomon codeword size used
in the latency path in which the bearer channel
is transported. The invalid value is 4294967295.
If data on the port is invalid or no… | column | byte Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.13 |
| vdsl2ChStatusInterBlockLength The actual block length of the interleaver
used in the latency path in which the bearer
channel is transported. The invalid value is 4294967295.
If data on the port is invalid … | column | byte Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.14 |
| vdsl2ChStatusLPATH The index of the actual
latency path in which the bearer is transported.
The invalid value is 4294967295. If data on the port
is invalid or no data is generated on the port beca… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.15 |
| vdsl2ChStatusPhyRrrcBits The bits in the channel that used to retransmission.
The invalid value is 4294967295. If data on the port cannot
be queried, data on the port is invalid, or no data is
generated… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.16 |
| vdsl2ChStatusPhyRtxQueue Queues in send buffer used for retransmission.
The invalid value is 4294967295. If data on the port
cannot be queried, data on the port is invalid, or no
data is generated on th… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.17 |
| vdsl2ChStatusActNetDataRate In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating.
In L2 state, this parameter contains the Net Data Rate in the previous L0 state.
… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.18 |
| vdsl2ChStatusActINPAgainstREIN If retransmission is used in a given transmit direction,
this parameter reports the actual impulse noise protection (INP)
against REIN (under specific conditions detailed in G.9… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.19 |
| vdsl2ChStatusChannelNum Provides the bearer channel number associated with this
row (i.e., the channel ifIndex).
This enables determining the channel configuration profile
and the channel thresholds prof… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.2 |
| hwvdsl2ChStatusUnlimitedVersionEtru The unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR.
This value is specified in G.998.4 (G.INP). | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.20 |
| vdsl2ChStatusActDataRate If retransmission is not used in a given transmit direction,
this parameter reports the actual net data rate at which the
bearer channel is operating in L0 power management stat… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.3 |
| vdsl2ChStatusPrevDataRate If retransmission is not used in a given transmit direction, this
parameter reports the previous net data rate the bearer channel
was operating at just before the latest net dat… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.4 |
| vdsl2ChStatusActDelay If retransmission is not used in a given transmit direction, this
parameter is the actual one-way interleaving delay introduced by
the PMS-TC excluding delay in L1 and L2 state.… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.5 |
| vdsl2ChStatusAtmStatus Indicates current state (existing failures) of the VDSL
channel in case its Data Path is ATM. This is a bit-map of
possible conditions.
Options:
1. noDefect(0) - T… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChAtmStatus | .1.3.6.1.4.1.2011.6.115.1.2.1.1.6 |
| vdsl2ChStatusINP If retransmission is not used in a given transmit direction, this
parameter reports the actual impulse noise protection (INP) on the
bearer channel in the L0 state. In the L1 or… | column | 0.1 DMT symbol Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.8 |
| vdsl2ChStatusRSRedundancy The actual number of Reed-Solomon redundancy
bytes per codeword used in the latency path
in which the bearer channel is transported.
The value is coded in bytes.
The value 0 in… | column | byte Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.1.1.9 |