vdsl2DpboProfEselMin

Object

column r/w 0.5dB Unsigned32

DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz
using cross-cables to additional KVz), including the KVz at the MSAN site. This value must
be adjustable as the minimum requirement via the SNMP interface in the configuration profile
for each VDSL2 port, and is set individually for each MSAN site and usage. As an option,
As an option, adjustment can be done for each MSAN or line card, thus taking effect for
entire port groups. It is used only for determining the MUF.
Unit: 0.5dB

Context

MIB: HUAWEI-VDSL2-LINE-MIB
OID: .1.3.6.1.4.1.2011.6.115.1.5.4.5.1.65535
Type: column
Access: readwrite
Status: current
Units: 0.5dB
Parent: vdsl2DpboProfEntry
Table: vdsl2DpboProfTable
Siblings: 9

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vdsl2DpboProfName This object identifies a row in this table.	column	OctetString	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.1`
vdsl2DpboProfWkMdMask This configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options: 1. current enabled dpbo work mode:AD…	column	Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.2`
vdsl2DpboProfEpsd This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for …	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEpsd	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.3`
vdsl2DpboProfEsel This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that …	column	0.5dB Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.4`
vdsl2DpboProfEscm This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-s…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2DpboEscm	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.5`
vdsl2DpboProfMus DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an u…	column	-0.5dBm/Hz Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.6`
vdsl2DpboProfFmin DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. …	column	4.3125 KHz Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.7`
vdsl2DpboProfFmax DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range…	column	4.3125 KHz Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.8`
vdsl2DpboProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.6.115.1.5.4.5.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects