hwvdsl2ServProfMaxNdrRtxUs
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.34
Object
column
r/w
bits/second Unsigned32
If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.4.1.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bits/second
- Parent
- vdsl2ServProfEntry
- Table
- vdsl2ServProfTable
- Siblings
- 33
Syntax
bits/second Unsigned32
Values & Constraints
Object Constraints
range: 32000-200000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2ServProfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.1 |
| vdsl2ServProfCh1MinResDataRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
M… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.10 |
| vdsl2ServProfCh1MaxDataRateDs If retransmission is not used in downstream direction,this parameter specifics
maximum data rate for the bearer channel on downstream direction. coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.11 |
| vdsl2ServProfCh1MaxDataRateUs If retransmission is not used in upstream direction,this parameter specifics
maximum data rate for the bearer channel on upstream direction. coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.12 |
| vdsl2ServProfCh1MinDataRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.13 |
| vdsl2ServProfCh1MinDataRateLowPwrUs Minimum Data Rate in Low Power state on Upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.99… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.14 |
| vdsl2ServProfCh1RaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.15 |
| vdsl2ServProfCh1RaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.16 |
| vdsl2ServProfCh2Enabling This parameter indicates whether the bearer 2 of VDSL2 line is enabling.
Options:
1. enable(1) - Enable the bearer 2 of VDSL2 line.
2. disable(2) - Disable the bearer 2 o… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnabling | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.17 |
| vdsl2ServProfCh2MinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.18 |
| vdsl2ServProfCh2MinDataRateUs Minimum Data Rate on Upstream direction. The minimum net data
rate for the bearer channel, coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.19 |
| vdsl2ServProfDataPathMode This parameter indicates the VDSL2 line data path modes.
Options:
1. atm (1) - atm mode
2. ptm (2) - ptm mode | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathModeType | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.2 |
| vdsl2ServProfCh2MinResDataRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.20 |
| vdsl2ServProfCh2MinResDataRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
M… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.21 |
| vdsl2ServProfCh2MaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.22 |
| vdsl2ServProfCh2MaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net data
rate for the bearer channel, coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.23 |
| vdsl2ServProfCh2MinDataRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.24 |
| vdsl2ServProfCh2MinDataRateLowPwrUs Minimum Data Rate in Low Power state on Upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.99… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.25 |
| vdsl2ServProfCh2RaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #2 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.26 |
| vdsl2ServProfCh2RaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #2 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.27 |
| vdsl2ServProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.28 |
| hwvdsl2ServProfMinEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.29 |
| vdsl2ServProfBitSwapEnablingDs Enables or disables the bit swap downstream of a line.
Options:
1. enable(1) - Enable the bit swap downstream of a line
2. disable(2) - Disable the bit swap downstream … | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.3 |
| hwvdsl2ServProfMinEtrRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.30 |
| hwvdsl2ServProfMaxEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.31 |
| hwvdsl2ServProfMaxEtrRtxUs If retransmission is used in upstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.32 |
| hwvdsl2ServProfMaxNdrRtxDs If retransmission is used in downstream direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.33 |
| vdsl2ServProfBitSwapEnablingUs Enables or disables the bit swap upstream of a line.
Options:
1. enable(1) - Enable the bit swap upstream of a line.
2. disable(2) - Disable the bit swap upstream of a li… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.4 |
| vdsl2ServProfRaMode The mode of operation of a rate-adaptive xTU-R in the transmit
direction.
Options:
1. manual (1) - No Rate-Adaptation. The initialization
pr… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2RaMode | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.5 |
| vdsl2ServProfCh1Enabling This parameter indicates whether the bearer 1 of VDSL2 line is enabling.
Options:
1. enable(1) - Enable the bearer 1 of VDSL2 line.
2. disable(2) - Disable the bearer 1 o… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChEnabling | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.6 |
| vdsl2ServProfCh1MinDataRateDs If retransmission is not used in downstream direction,this parameter specifics
minimum data rate for the bearer channel on downstream direction. coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.7 |
| vdsl2ServProfCh1MinDataRateUs If retransmission is not used in upstream direction,this parameter specifics
minimum data rate for the bearer channel on upstream direction. coded in bit/s.
Unit: bits/second | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.8 |
| vdsl2ServProfCh1MinResDataRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.1.1.9 |