vdsl2UpboProfKl0RefBand
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536
Object
Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4]
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vdsl2UpboProfEntry
- Table
- vdsl2UpboProfTable
- Siblings
- 7
Syntax
HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBand
- Source
- HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKl0RefBand
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2UpboProfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.1 |
| vdsl2UpboProfPsdBand This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band. A UPBOPSD defined for each band shall consist of two
parameters … | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboPsdBand | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2 |
| vdsl2UpboProfKl This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by
the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (cod… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.3 |
| vdsl2UpboProfKlf This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB
(UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Oth… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboKlf | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.4 |
| vdsl2UpboProfKlAuto This parameter defines the mode in which kl0 is computed when Vdsl2UpboKlf is auto.
The value is defined as below:
1-max(kl0CO,kl0CPE)
2-min(kl0CO,kl0CPE)
3-kl0CO … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.5 |
| vdsl2UpboProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.6 |
| vdsl2UpboProfBoostMode This object indicates whether the equalized FEXT UPBO method is supported or not.
Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported
2. enable(2) - The Eq… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2UpboBoostMode | .1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65535 |