vdsl2ChConfProfMinSosBrDs
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.32
Object
column
r/w
8Kbps Unsigned32
This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The valid range of values is from 0 to 524280Kbps in steps of 8Kbps. Unit: 8Kbps
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.5.2.1.1.32- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 8Kbps
- Parent
- vdsl2ChConfProfileEntry
- Table
- vdsl2ChConfProfileTable
- Siblings
- 55
Syntax
8Kbps Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2ChConfProfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.1 |
| vdsl2ChConfProfMaxDelayDs If retransmission is not used in downstream direction,this parameter
is maximum interleave delay on downstream direction. The maximum
one-way interleaving delay introduced by the … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.10 |
| vdsl2ChConfProfMaxDelayUs If retransmission is not used in upstream direction,this parameter
is maximum interleave delay on upstream direction. The maximum
one-way interleaving delay introduced by the PMS-… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.11 |
| vdsl2ChConfProfMinProtectionDs If retransmission is not used in downstream direction,this parameter
is minimum impulse noise protection for the bearer channel on downstream
direction. The minimum impulse noise … | column | symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.12 |
| vdsl2ChConfProfMinProtectionUs If retransmission is not used in upstream direction,this parameter
is minimum impulse noise protection for the bearer channel on upstream
direction. The minimum impulse noise prot… | column | symbols HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionUs | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.13 |
| vdsl2ChConfProfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7).
Option… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBer | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.14 |
| vdsl2ChConfProfMaxBerUs Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7).
Options:… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2MaxBer | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.15 |
| vdsl2ChConfProfUsDataRateDs If retransmission is not used in downstream direction,this parameter
is data rate threshold upshift for downstream direction. An
'Up-shift rate change' event is triggered when the… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.16 |
| vdsl2ChConfProfDsDataRateDs If retransmission is not used in downstream direction,this parameter
is data rate threshold downshift for downstream direction. A
'Down-shift rate change' event is triggered when… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.17 |
| vdsl2ChConfProfUsDataRateUs If retransmission is not used in upstream direction,this parameter
is data rate threshold up shift for upstream direction. An
'Up-shift rate change' event is triggered when the a… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.18 |
| vdsl2ChConfProfDsDataRateUs If retransmission is not used in upstream direction,this parameter
is data rate threshold downshift for upstream direction. A
'Down-shift rate change' event is triggered when the… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.19 |
| vdsl2ChConfProfMinDataRateDs If retransmission is not used in downstream direction,this parameter specifics
minimum data rate for the bearer channel on downstream direction. The rate is
coded in steps of 100… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.2 |
| vdsl2ChConfProfImaEnabled IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.20 |
| vdsl2ChConfProfDataPathMode The channel data path mode.
Options:
1. atm(1) - ATM
2. ptm(2) - PTM
3. both(3) - ATM and PTM
Huawei defined. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2DataPathMode | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.21 |
| vdsl2ChConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.22 |
| vdsl2ChConfProfPhyRcontrolDs To enable or disable the retransmission function. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.23 |
| vdsl2ChConfProfPhyRcontrolUs To enable or disable the retransmission function. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PhyRControl | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.24 |
| vdsl2ChConfProfInpMaxDs Maximum Impulse Noise Protection on downstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.25 |
| vdsl2ChConfProfInpMaxUs Maximum Impulse Noise Protection on upstream direction. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2SymbolProtectionDs | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.26 |
| vdsl2ChConfProfMinRtxRatioDs This object is used to config the minimum retransmission band width parameter downstream. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.27 |
| vdsl2ChConfProfMinRtxRatioUs This object is used to config the minimum retransmission band width parameter upstream. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.28 |
| vdsl2ChConfProfMinRSoverheadDs This object is used to config the minimum RSoverhead parameter downstream.. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.29 |
| vdsl2ChConfProfMinDataRateUs If retransmission is not used in upstream direction,this parameter specifics
minimum data rate for the bearer channel on upstream direction. The rate is
coded in steps of 1000 bi… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.3 |
| vdsl2ChConfProfMinRSoverheadUs This object is used to config the minimum RSoverhead parameter upstream.. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.30 |
| vdsl2ChConfProfErasureDecoding To enable or disable the erasure decoding of a channel.
Options:
1. enable(1)
2. disable(2) | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2ProfSwitchType | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.31 |
| vdsl2ChConfProfMinSosBrUs This parameter specifies the minimum net data rate required for a valid SOS request in
the upstream direction.The valid range of values is from 0 to 524280Kbps in steps of 8Kbps.… | column | 8Kbps Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.33 |
| vdsl2ChConfProfMinEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.34 |
| vdsl2ChConfProfMinEtrRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.35 |
| vdsl2ChConfProfMaxEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.36 |
| vdsl2ChConfProfMaxEtrRtxUs If retransmission is used in upstream direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of
1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.37 |
| vdsl2ChConfProfMaxNdrRtxDs If retransmission is used in downstream direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.38 |
| vdsl2ChConfProfMaxNdrRtxUs If retransmission is used in upstream direction, this parameter specifies the
maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s. | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.39 |
| vdsl2ChConfProfMinResDataRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.4 |
| vdsl2ChConfProfMaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.40 |
| vdsl2ChConfProfMaxDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.41 |
| vdsl2ChConfProfMinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for det… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.42 |
| vdsl2ChConfProfMinDelayRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detai… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.43 |
| vdsl2ChConfProfMinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.44 |
| vdsl2ChConfProfMinInpShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.45 |
| vdsl2ChConfProfMinInp8ShineRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over D… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.46 |
| vdsl2ChConfProfMinInp8ShineRtxUs If retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT… | column | symbols Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.47 |
| vdsl2ChConfProfShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.48 |
| vdsl2ChConfProfShineRatioRtxUs If retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.0… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.49 |
| vdsl2ChConfProfMinResDataRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
M… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.5 |
| vdsl2ChConfProfMinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.50 |
| vdsl2ChConfProfMinInpReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.51 |
| vdsl2ChConfProfMinInp8ReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DM… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.52 |
| vdsl2ChConfProfMinInp8ReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT … | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.53 |
| vdsl2ChConfProfIatReinRtxDs If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - … | column | Enumeration | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.54 |
| vdsl2ChConfProfIatReinRtxUs If retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an … | column | Enumeration | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.55 |
| vdsl2ChConfProfInitPolicy This parameter indicates which policy shall be applied to
determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY are 0,1 and 2.
Tho… | column | Enumeration | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.56 |
| vdsl2ChConfProfMaxDataRateDs If retransmission is not used in downstream direction,this parameter specifics
maximum data rate for the bearer channel on downstream direction. The rate is
coded in steps of 100… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.6 |
| vdsl2ChConfProfMaxDataRateUs If retransmission is not used in upstream direction,this parameter specifics
maximum data rate for the bearer channel on upstream direction. The rate is
coded in steps of 1000 bi… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.7 |
| vdsl2ChConfProfMinDataRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.8 |
| vdsl2ChConfProfMinDataRateLowPwrUs Minimum Data Rate in Low Power state on Upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s, during the low power state (L1 in G.992.2, L2 in
G.99… | column | bits/second Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.5.2.1.1.9 |