vdsl2SCStatusQlnMt
HUAWEI-VDSL2-LINE-MIB ·
.1.3.6.1.4.1.2011.6.115.1.2.3.1.6
Object
column
SNMPv2-SMIUnsigned32
The number of symbols used to measure the Quiet Line Noise values on the respective transmission direction. This parameter should correspond to the value specified in the recommendation (e.g., the number of symbols in 1 second time interval for G.992.3). This parameter corresponds to 1 second in loop diagnostic procedure and should be updated in initialization.
Context
- MIB
- HUAWEI-VDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.2011.6.115.1.2.3.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vdsl2SCStatusEntry
- Table
- vdsl2SCStatusTable
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2SCStatusDirection The direction of the sub-carrier either
upstream or downstream | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Direction | .1.3.6.1.4.1.2011.6.115.1.2.3.1.1 |
| vdsl2SCStatusAttainableRate Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the XTU-C transmitter and XTU-R
receiver (when referring to downstream direction) or by the
XTU-R … | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.10 |
| vdsl2SCStatusActAtp Actual Aggregate Transmit Power from the XTU (XTU-R on
downstream direction and XTU-C on upstream direction), at the
instant of measurement. It ranges from -310 to 310 units of
0… | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.11 |
| vdsl2SCStatusRowStatus Row Status. The SNMP agent should create rows in this
table and in the vdsl2SCStatusTable for storing the results
of a DELT performed on the associated line, if such rows
do not … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.115.1.2.3.1.12 |
| vdsl2SCStatusProfile This configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line. | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2Profiles | .1.3.6.1.4.1.2011.6.115.1.2.3.1.13 |
| vdsl2SCStatusClassmask In order to reduce the number of configuration possibilities,
the limit PSD masks are grouped in the following PSD mask classes:
- Class 998 Annex A: D-32, D-64.
- Class 997-M1… | column | HUAWEI-VDSL2-LINE-TC-MIBVdsl2PSDClassMask | .1.3.6.1.4.1.2011.6.115.1.2.3.1.14 |
| vdsl2SCStatusLinScale The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic
procedu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.2 |
| vdsl2SCStatusLinScGroupSize Number of sub-carriers per group used to report the H(f)
linear representation values for the respective transmission
direction. The valid values are 1, 2, 4 and 8. For ADSL, this… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.3 |
| vdsl2SCStatusLogMt The number of symbols used to measure the H(f) logarithmic
measurement values for the respective transmission direction.
This parameter should correspond to the value specified in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.4 |
| vdsl2SCStatusLogScGroupSize Number of sub-carriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4 and 8.
For ADSL,… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.5 |
| vdsl2SCStatusQlnScGroupSize Number of sub-carriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.7 |
| vdsl2SCStatusMtime SNR Measurement Time. The number of symbols used to
measure the SNR values on the respective transmission
direction. It should correspond to the value specified in the
recommend… | column | symbols SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.8 |
| vdsl2SCStatusSnrScGroupSize Number of sub-carriers per group used to report the SNR
values on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to o… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.115.1.2.3.1.9 |