vdsl2ChStatusActDelay

HUAWEI-VDSL2-LINE-MIB · .1.3.6.1.4.1.2011.6.115.1.2.1.1.5

Object

column milliseconds Unsigned32

If retransmission is not used in a given transmit direction, this 
parameter is the actual one-way interleaving delay introduced by 
the PMS-TC excluding delay in L1 and L2 state. In L1 and L2 state, 
the parameter contains the interleaving delay in the previous L0 
state.
If retransmission is used in a given transmit direction, this 
parameter specifies the actual value of the time-independent 
component of the delay due to retransmission only.
It is coded in ms (rounded to the nearest ms).
The invalid value is 4294967295. If data on the port is invalid 
or no data is generated on the port because the port has not 
been activated, the invalid value will be returned.
Unit: milliseconds

Context

MIB: HUAWEI-VDSL2-LINE-MIB
OID: .1.3.6.1.4.1.2011.6.115.1.2.1.1.5
Type: column
Access: readonly
Status: current
Units: milliseconds
Parent: vdsl2ChannelStatusEntry
Table: vdsl2ChannelStatusTable
Siblings: 19

Syntax

milliseconds Unsigned32

Values & Constraints

Object Constraints

range: 0-8176

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vdsl2ChStatusUnit The termination unit xTU-C(1) or xTU-R(2).	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2Unit	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.1`
vdsl2ChStatusRSSymbols The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid or no dat…	column	0.01 DMT symbol SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.10`
vdsl2ChStatusInterDepth The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates n…	column	Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.11`
vdsl2ChStatusSymbolLength The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. The invalid value is…	column	bit Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.12`
vdsl2ChStatusRSSize The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid or no…	column	byte Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.13`
vdsl2ChStatusInterBlockLength The actual block length of the interleaver used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid …	column	byte Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.14`
vdsl2ChStatusLPATH The index of the actual latency path in which the bearer is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port beca…	column	Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.15`
vdsl2ChStatusPhyRrrcBits The bits in the channel that used to retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.16`
vdsl2ChStatusPhyRtxQueue Queues in send buffer used for retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on th…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.17`
vdsl2ChStatusActNetDataRate In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the previous L0 state. …	column	bits/second SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.18`
vdsl2ChStatusActINPAgainstREIN If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.9…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.19`
vdsl2ChStatusChannelNum Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the channel thresholds prof…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.2`
hwvdsl2ChStatusUnlimitedVersionEtru The unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR. This value is specified in G.998.4 (G.INP).	column	bits/second SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.20`
vdsl2ChStatusActDataRate If retransmission is not used in a given transmit direction, this parameter reports the actual net data rate at which the bearer channel is operating in L0 power management stat…	column	bits/second Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.3`
vdsl2ChStatusPrevDataRate If retransmission is not used in a given transmit direction, this parameter reports the previous net data rate the bearer channel was operating at just before the latest net dat…	column	bits/second Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.4`
vdsl2ChStatusAtmStatus Indicates current state (existing failures) of the VDSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. Options: 1. noDefect(0) - T…	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChAtmStatus	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.6`
vdsl2ChStatusPtmStatus Indicates current state (existing failures) of the VDSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. Options: 1. noFailure(0) - No failure …	column	HUAWEI-VDSL2-LINE-TC-MIBVdsl2ChPtmStatus	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.7`
vdsl2ChStatusINP If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 state. In the L1 or…	column	0.1 DMT symbol Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.8`
vdsl2ChStatusRSRedundancy The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. The value 0 in…	column	byte Unsigned32	`.1.3.6.1.4.1.2011.6.115.1.2.1.1.9`