NETLINK-SPECIFIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

652

nsNodTable

table mandatory

.1.3.6.1.4.1.173.6.1.3 · 1 row entry · 3 columns

Open in standard view

A table showing all nodes known to this node
along with status and neighbor information.

nsEntry entry .1.3.6.1.4.1.173.6.1.3.1

Each entry of the node table is indexed by
node number.

Indexes

nsNodNum

Column	Syntax	OID
nsNodNum mandatory The node number of the desired node. This is the index into the node table.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.6.1.3.1.1`
nsStatus mandatory The operational status of the node. The status is given as: 1 = Node is defined in the database; 9 = Node is operational;	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.6.1.3.1.2`
nsNumNeigh mandatory Current number of neighbor nodes to this node.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.6.1.3.1.3`

rlpConfigTable

table mandatory

.1.3.6.1.4.1.173.7.2.2 · 1 row entry · 8 columns

Open in standard view

A Table to describe each RLP on the node

rlpEntry entry .1.3.6.1.4.1.173.7.2.2.1

An RLP entry containing objects relating to RLPs.

Indexes

rlpIndex

Column Syntax OID

rlpIndex mandatory

The RLP number on the node

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.2.2.1.1

rlpStatus mandatory

The current state of this RLP

Enumeration

Enumerated Values:

1	installed
2	configured
3	load-failed
4	loading
5	ipl-failed
6	ipl-in-progress
7	failed
8	operational
9	power-off
10	power-on

.1.3.6.1.4.1.173.7.2.2.1.2

rlpMemorySize mandatory

The amount of memory installed on this RLP

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.2.2.1.3

rlpLIC1Type mandatory

The Type of Line Interface card in the first position

Enumeration

Enumerated Values:

1	none
2	rs232
3	rs422
4	v35
5	hs-rs232
6	x21
7	rs449
8	universal
10	t1
11	e1
13	voice

.1.3.6.1.4.1.173.7.2.2.1.4

rlpLIC2Type mandatory

The Type of Line Interface card in the second position

Enumeration

Enumerated Values:

1	none
2	rs232
3	rs422
4	v35
5	hs-rs232
6	x21
7	rs449
8	universal
10	t1
11	e1
13	voice

.1.3.6.1.4.1.173.7.2.2.1.5

rlpProtocol mandatory

The protocols configured on this RLP. This is an OCTET
STRING where each octet represents a protocol type. The size of this
is the maximum number of protocols allowed on an RLP (rlpMaxProtos).
The protocol types are de…

OctetStringr/w

.1.3.6.1.4.1.173.7.2.2.1.6

rlpGroupNumber mandatory

The group to which this RLP belongs- always 1 if not
FRX7000.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.173.7.2.2.1.7

rlpGroupResponsibility mandatory

The responsibility of this RLP within its group, always
primary if not FRX7000.

Enumeration

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.173.7.2.2.1.8

portPhyX25AdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.1 · 1 row entry · 11 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
Most of the objects in this read-write table have
corresponding read-only objects in the
portX25OperTable that return the current
operating value.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portPhyX25AdminEntry entry .1.3.6.1.4.1.173.7.3.1.1.1

A list of configured values for an X25 port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portPhyX25AdminConnector mandatory

Physical port interface connector type.

Enumerationr/w

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1
11	e1

.1.3.6.1.4.1.173.7.3.1.1.1.1

portPhyX25AdminSpeed mandatory

This object defines the speed of the X25 port. The speed may
only be set to one of a series of reasonable values, and if an attempt
is made to set the speed to a value which is within the valid range
but not equal to …

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.1.1.1.2

portPhyX25AdminGenerateClock mandatory

Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.1.1.3

portPhyX25AdminRcvClockFromDTE mandatory

This object defines whether the receive clock
will be used from the DTE.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.1.1.4

portPhyX25AdminDialOut mandatory

This flag indicates whether the port is connected to a dial
modem, and whethter connections will be initiated through
dial-in or dial-out calls.

Enumerationr/w

Enumerated Values:

1	none
2	dialIn
3	dialOut

.1.3.6.1.4.1.173.7.3.1.1.1.5

portPhyX25AdminInactivityTimer mandatory

This timer defines in minutes, the period of inactivity
allowed between calls. Once the timer expires, the port
is disabled untill the next call is placed, if a Dial out
port, or the Disconnect Timer expires, if a Dial …

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.173.7.3.1.1.1.6

portPhyX25AdminDisconnectTimer mandatory

This timer defines, in seconds, the length of time a
dial-in port will remain disabled after expiration of the
InActivity Timer.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.1.1.1.7

portPhyX25AdminSetupTimer mandatory

This timer determines the length of time, in seconds, that
a response must be received by the port, after entering the
Linkup state. If a response is not received, the port enters
a Failed state.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.1.1.1.8

portPhyX25AdminTrunkFlag mandatory

This flag, when set, indicates the port is associated
with a network trunk group. It will be disabled/enabled
if the network trunk is not operational.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.1.1.9

portPhyX25AdminTrunkGroup mandatory

This variable contains a string of 8 bytes, with each
byte indicating 8 ports on an RLP that may be a part of
a trunk group. Since a TurboFrad has only 1 RLP, only the
first byte is valid if the node is an FRX4000. Each…

OctetStringr/w

.1.3.6.1.4.1.173.7.3.1.1.1.10

portPhyX25AdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portPhyX25AdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', w…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.1.1.1.11

portPhyX25OperTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.2 · 1 row entry · 10 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
All of the objects in this table are read-only.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portPhyX25OperEntry entry .1.3.6.1.4.1.173.7.3.1.2.1

A list of configured values for an X25 port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portPhyX25OperConnector mandatory

Physical port interface connector type.

Enumeration

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1
11	e1

.1.3.6.1.4.1.173.7.3.1.2.1.1

portPhyX25OperSpeed mandatory

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.1.2.1.2

portPhyX25OperGenerateClock mandatory

Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.2.1.3

portPhyX25OperRcvClockFromDTE mandatory

This object defines whether the receive clock will be
used from the DTE.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.2.1.4

portPhyX25OperDialOut mandatory

This flag indicates whether the port is connected to a dial
modem, and whethter connections will be initiated through
dial-in or dial-out calls.

Enumeration

Enumerated Values:

1	none
2	dialIn
3	dialOut

.1.3.6.1.4.1.173.7.3.1.2.1.5

portPhyX25OperInactivityTimer mandatory

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.173.7.3.1.2.1.6

portPhyX25OperDisconnectTimer mandatory

This timer defines, in seconds, the length of time a
dial-in port will remain disabled after expiration of the
InActivity Timer.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.1.2.1.7

portPhyX25OperSetupTimer mandatory

This timer determines the length of time, in seconds, that
a response must be received by the port, after entering the
Linkup state. If a response is not received, the port enters
a Failed state.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.1.2.1.8

portPhyX25OperTrunkFlag mandatory

This flag, when set, indicates the port is associated
with a network trunk group. It will be disabled/enabled
if the network trunk is not operational.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.2.1.9

portPhyX25OperTrunkGroup mandatory

This variable contains a string of 8 bytes, with each
byte indicating a port on this RLP that may be a part of
a trunk group.

OctetString

.1.3.6.1.4.1.173.7.3.1.2.1.10

portLogicalX25AdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.3 · 1 row entry · 5 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 Logical port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portLogicalX25AdminEntry entry .1.3.6.1.4.1.173.7.3.1.3.1

A list of configured values for an X25 logical port.

Indexes

nlIfRlp nlIfPhyPort nlIfPort

Column Syntax OID

portLogicalX25AdminFrDlci mandatory

The DLCI number used to identify the entry in the table. The
range is 16-991.

Integer32r/w

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.3.1.3.1.1

portLogicalX25AdminCxnPriority mandatory

This field sets the priority of the connection among others on the
physical port. The range is 0 for lowest priority to 9 for
the highest priority.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.3.1.3.1.2

portLogicalX25AdminRfc1490 mandatory

This field indicates the encapsulation method used

Enumerationr/w

Enumerated Values:

1	annexG
2	rfc1490

.1.3.6.1.4.1.173.7.3.1.3.1.3

portLogicalX25AdminBAG mandatory

Assigns this DLCI to one of sixteen groups whose parameters
regulate bandwidth usage. A 0 value indicates the DLCI does
not use BAGs

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.173.7.3.1.3.1.4

portLogicalX25AdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portLogicalX25AdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.1.3.1.5

portLogicalX25OperTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.4 · 1 row entry · 4 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 Logical port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portLogicalX25OperEntry entry .1.3.6.1.4.1.173.7.3.1.4.1

A list of configured values for an X25 port.

Indexes

nlIfRlp nlIfPhyPort nlIfPort

Column Syntax OID

portLogicalX25OperFrDlci mandatory

The DLCI number used to identify the entry in the table. The
range is 16-991.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.1.4.1.1

portLogicalX25OperCxnPriority mandatory

This field sets the priority of the connection among others on the
physical port. The range is 0 for lowest priority to 9 for
the highest priority.

Integer32

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.3.1.4.1.2

portLogicalX25OperRfc1490 mandatory

This field indicates the encapsulation method used

Enumeration

Enumerated Values:

1	annexG
2	rfc1490

.1.3.6.1.4.1.173.7.3.1.4.1.3

portLogicalX25OperBAG mandatory

Assigns this DLCI to one of sixteen groups whose parameters
regulate bandwidth usage.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.3.1.4.1.4

portX25AdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.5 · 1 row entry · 17 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
Most of the objects in this read-write table have
corresponding read-only objects in the
portX25OperTable that return the current
operating value.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portX25AdminEntry entry .1.3.6.1.4.1.173.7.3.1.5.1

A list of configured values for an X25 port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portX25AdminBlockedFlag mandatory

A flag which when set, means the port should not be
enabled after a boot-up of the node.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.1

portX25AdminFlowCtrlNeg mandatory

A flag which if set, permits negotiation of
the flow control parameters on a per call basis.
If N is selected, the default packet and window
sizes will be used. If Y is selected, the packet
or window size in a call pack…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.2

portX25AdminThruptClassNeg mandatory

A flag which ,if set, permists negotiation of
the throughput class for either direction of
data transmission on a per call basis. If N is
selected, the configured Max Throughput Class
value is used. If Y, any throughpu…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.3

portX25AdminLocChgPrev mandatory

If Y is selected, no calls can be charged to
port. Incoming calls from the network with
reverse charge specified will be rejected. Outgoing
calls will insert reverse charge in the call packet
if not already included.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.4

portX25AdminRevChgAccpt mandatory

A flag, if set, that authorizes transmission of
incoming calls that request the reverse charge
facility. If N is selected, and a call requests
it, it will not be transmitted.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.5

portX25AdminFastSelAccpt mandatory

A flag, if set, that authorizes transmission of
incoming calls that request the Fast Select
facility.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.6

portX25AdminInCallBar mandatory

An X25 facility that prevents transmission of
incoming calls to the local DTE.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.7

portX25AdminOutCallBar mandatory

An X25 facility that prevents transmission of
incoming calls to the local DTE.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.8

portX25AdminMaxPktSize mandatory

The maximum data packet size that will be allowed to pass
through this port.

Integer32r/w

Constraints:
range: 128-4096

.1.3.6.1.4.1.173.7.3.1.5.1.9

portX25AdminDefPktSize mandatory

This is the size that will be assigned to an incoming call
setup packet if the packet does not request a packet size.

Integer32r/w

Constraints:
range: 16-4096

.1.3.6.1.4.1.173.7.3.1.5.1.10

portX25AdminMaxWinSize mandatory

This is the maximum number of unacknowledged packets
per logical channel that can pass through this port.

Integer32r/w

Constraints:
range: 2-7

.1.3.6.1.4.1.173.7.3.1.5.1.11

portX25AdminDefWinSize mandatory

This size will be assigned to an incoming call
setup packet if the packet doesn't request a window size.

Integer32r/w

Constraints:
range: 1-7

.1.3.6.1.4.1.173.7.3.1.5.1.12

portX25AdminMaxThruptClass mandatory

This specifies the default throughput class that will be
inserted into a Call Request packet if Thruput Class
negotiation is not enabled or if a thruput class is not
requested in the call request.

Integer32r/w

Constraints:
range: 3-13

.1.3.6.1.4.1.173.7.3.1.5.1.13

portX25AdminCUGPref mandatory

This flag, if set, indicates the port belongs to at least
one CUG.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.14

portX25AdminCUGIndex mandatory

This number is an index into a Closed User Group table
which identifies the default Closed User Group for the
port.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.173.7.3.1.5.1.15

portX25AdminCUGIncAccess mandatory

This flag, when set, indicates whether this port will
be allowed to receive calls from outside its CUGs.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.16

portX25AdminCUGOutAccess mandatory

This flag, when set, indicates whether this port will
be allowed to make calls outside its CUGs.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.5.1.17

portX25OperTable

table mandatory

.1.3.6.1.4.1.173.7.3.1.6 · 1 row entry · 17 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage an X25 port. Changing one of
these parameters may take effect in the operating
port immediately or may wait until the interface is
restarted depending on the details of the
implementation.
          
The objects in this read-only table 
corresponding read-only objects in the
portX25OperTable that return the current
operating value.
          
The operating values may be different from these
configured values if a configured parameter was
configured after the interface was started.

portX25OperEntry entry .1.3.6.1.4.1.173.7.3.1.6.1

A list of configured values for an X25 port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portX25OperBlockedFlag mandatory

A flag which when set, means the port should not be
enabled after a boot-up of the node.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.1

portX25OperFlowCtrlNeg mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.2

portX25OperThruptClassNeg mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.3

portX25OperLocChgPrev mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.4

portX25OperRevChgAccpt mandatory

A flag, if set, that authorizes transmission of
incoming calls that request the reverse charge
facility. If N is selected, and a call requests
it, it will not be transmitted.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.5

portX25OperFastSelAccpt mandatory

A flag, if set, that authorizes transmission of
incoming calls that request the Fast Select
facility.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.6

portX25OperInCallBar mandatory

An X25 facility that prevents transmission of
incoming calls to the local DTE.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.7

portX25OperOutCallBar mandatory

An X25 facility that prevents transmission of
incoming calls to the local DTE.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.8

portX25OperMaxPktSize mandatory

The maximum data packet size that will be allowed to pass
through this port.

Integer32

Constraints:
range: 128-4096

.1.3.6.1.4.1.173.7.3.1.6.1.9

portX25OperDefPktSize mandatory

This is the size that will be assigned to an incoming call
setup packet if the packet does not request a packet size.

Integer32

Constraints:
range: 16-4096

.1.3.6.1.4.1.173.7.3.1.6.1.10

portX25OperMaxWinSize mandatory

This is the maximum number of unacknowledged packets
per logical channel that can pass through this port.

Integer32

Constraints:
range: 2-7

.1.3.6.1.4.1.173.7.3.1.6.1.11

portX25OperDefWinSize mandatory

This size will be assigned to an incoming call
setup packet if the packet doesn't request a window size.

Integer32

Constraints:
range: 1-7

.1.3.6.1.4.1.173.7.3.1.6.1.12

portX25OperMaxThruptClass mandatory

This specifies the default throughput class that will be
inserted into a Call Request packet if Thruput Class
negotiation is not enabled or if a thruput class is not
requested in the call request.

Integer32

Constraints:
range: 3-13

.1.3.6.1.4.1.173.7.3.1.6.1.13

portX25OperCUGPref mandatory

This flag, if set, indicates the port belongs to at least
one CUG.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.14

portX25OperCUGIndex mandatory

This number is an index into a Closed User Group table
which identifies the default Closed User Group for the
port.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.173.7.3.1.6.1.15

portX25OperCUGIncAccess mandatory

This flag, when set, indicates whether this port will
be able to receive calls from outside its CUGs.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.16

portX25OperCUGOutAccess mandatory

This flag, when set, indicates whether this port will
be able to make calls outside its CUGs.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.1.6.1.17

portFrConfigTable

table mandatory

.1.3.6.1.4.1.173.7.3.2.1 · 1 row entry · 15 columns

Open in standard view

A list of Frame Relay ports .  The number of
entries will be the number of Frame Relay ports on the node.

portFrEntry entry .1.3.6.1.4.1.173.7.3.2.1.1

An Frame Relay Port entry containing objects
relating to the port that are configurable
by the user.

Indexes

portFrRlpIndex portFrPortIndex

Column Syntax OID

portFrRlpIndex mandatory

The RLP number of the Frame Relay port. It will be in the
range 1-8.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.1.1.1

portFrPortIndex mandatory

The Port number of the Frame Relay port. It will
be in the range 1-8 for a physical port. It will be in the range
9-64 for a Frame Relay logical port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.1.1.2

portFrBlockedFlag mandatory

A flag which when set, means the port should not be
enabled after a boot-up of the node.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.3

portFrMaxBytesPerFrame mandatory

The maximum number of bytes allowed in an I Frame for this
Frame Relay port.

Integer32r/w

Constraints:
range: 16-4096

.1.3.6.1.4.1.173.7.3.2.1.1.4

portFrT392Timer mandatory

This timer indicates how long the network will wait between
Status Enquiry messages before recording an error. It
should be greater than or equal to the frDlcmiPollingInterval
variable in the RFC1315 Mib.

Integer32r/w

Constraints:
range: 5-30

.1.3.6.1.4.1.173.7.3.2.1.1.5

portFrOutgoingRateControl mandatory

This is a flag which, when set, enables the enforcement of
the Outgoing Rate Control parameters.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.6

portFrBandwidthAllocation mandatory

This is a flag which, when set, enables whether the bandwidth
allocation will be enforced.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.7

portFrConnector mandatory

This defines the connector type of the Frame Relay port.

Enumerationr/w

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1
11	e1

.1.3.6.1.4.1.173.7.3.2.1.1.8

portFrLogicalDCE mandatory

This defines the port as logical DCE or DTE.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.9

portFrGenClock mandatory

This specifies whether the port will generate the clock
necessary to synchronize traffic over the link.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.10

portFrRcvClkFrmDTE mandatory

This allows the clock to be looped back from the DTE using
the TT (Terminal Timing) signal, which can be helpful on
high-speed lines.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.11

portFrLLM mandatory

This determines whether, and what type of, configurable
network management (status enquiries) will be allowed.

Enumerationr/w

Enumerated Values:

1	none
2	lmi
3	annexd

.1.3.6.1.4.1.173.7.3.2.1.1.12

portFrRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portFrConfigTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', whic…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.2.1.1.13

portFrSpeed mandatory

This object defines the speed of the Frame Relay port. The speed may
only be set to one of a series of reasonable values, and if an attempt is made
to set the speed to a value which is within the valid range but not eq…

Integer32r/w

Constraints:
range: 75-2048000

.1.3.6.1.4.1.173.7.3.2.1.1.14

portFrBackupUseOnly mandatory

This object determines whether all DLCIs on the port will
be reserved exclusively as backups for other DLCIs in the
same node. If yes is specified for this object, the port
will remain disabled until needed for backup.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.1.1.15

portDLCIConfigTable

table mandatory

.1.3.6.1.4.1.173.7.3.2.2 · 1 row entry · 14 columns

Open in standard view

A list of DLCI's on Frame Relay ports .  The number of
entries will be the number of DLCIs on all the Frame Relay
ports on a node.

portDLCIEntry entry .1.3.6.1.4.1.173.7.3.2.2.1

An Frame Relay Port DLCI entry
relating to the Rate Control Information that is configurable
by the user.

Indexes

portDLCIRlpIndex portDLCIPortIndex portDLCIIndex

Column Syntax OID

portDLCIRlpIndex mandatory

The RLP number on which the DLCI is located. The range for
this is 1-8.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.1

portDLCIPortIndex mandatory

The port number on which the DLCI is located. The range for
this is 1-8 for a physical FR port and 9-64 for a logical FR port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.2

portDLCIIndex mandatory

The DLCI number used to identify the entry in the table. The
range is 16-991.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.3

portDLCIIncomingCIR mandatory

The committed information rate that is supported on the
DLCI for incoming data.

Integer32r/w

Constraints:
range: 0-2000

.1.3.6.1.4.1.173.7.3.2.2.1.4

portDLCIOutgoingCIR mandatory

The committed information rate that is supported on the
DLCI for outgoing data.

Integer32r/w

Constraints:
range: 0-2000

.1.3.6.1.4.1.173.7.3.2.2.1.5

portDLCIIncomingBc mandatory

The committed burst size is the maximum amount of data
to be transmitted under normal conditions within the time
period defined by Bc/Cir that is supported on the
DLCI for incoming data.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.6

portDLCIOutgoingBc mandatory

The committed burst size is the maximum amount of data
to be transmitted under normal conditions within the time
period defined by Bc/Cir that is supported on the
DLCI for Outgoing data.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.7

portDLCIIncomingBe mandatory

The excess burst size is the maximum amount of incoming data
in excess of the committed burst size that the network will try to
transfer during the time interval determined by Bc/Cir on this
DLCI.

Integer32r/w

Constraints:
range: 0-32767

.1.3.6.1.4.1.173.7.3.2.2.1.8

portDLCIOutgoingBe mandatory

The excess burst size is the maximum amount of incoming data
in excess of the committed burst size that the network will try to
transfer during the time interval determined by Bc/Cir on this
DLCI.

Integer32r/w

Constraints:
range: 0-32767

.1.3.6.1.4.1.173.7.3.2.2.1.9

portDLCIBecnRecoveryCnt mandatory

The BECN recovery Count is a method of controlling the rate
of return to max traffic flow after it has been reduced due to
congestion. The value determines the number of packets received
sequentially without BECN set, b…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.2.2.1.10

portDLCIPriority mandatory

This field sets the priority of the DLCI among others on the
physical port. The range is 0 for lowest priority to 4 for
the highest priority.

Integer32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.173.7.3.2.2.1.11

portDLCIRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portDLCIConfigTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', wh…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.2.2.1.12

portDLCIBackupGroup mandatory

This object specifies (if configured as any number other than
zero) that this is a primary DLCI, and identifies the backup
DLCI(s) (in a Frame Relay backup group) that will take over if
this DLCI fails. This is applicab…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.2.2.1.13

portDLCIBackupProtEnb mandatory

This object specifies whether the DLCI will be used as a
non-initiating backup DLCI. The DLCI will wait for a backup
protocol message from the initiating end, telling the backup
where to send the rest of the messages.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.2.1.14

portFrBackupGroupTable

table mandatory

.1.3.6.1.4.1.173.7.3.2.3 · 1 row entry · 7 columns

Open in standard view

A Table describes the Frame Relay Backup MIB .

portFrBackupEntry entry .1.3.6.1.4.1.173.7.3.2.3.1

This Entry contains the SNMP objects that are used for
configurating the Frame Relay Backup.

Indexes

portFrBackupRLP portFrBackupPort portFrBackupDLCI portFrBackupGroup

Column Syntax OID

portFrBackupRLP mandatory

This RLP number identifies the RLP containing the
primary and backup DLCIs.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.3.2.3.1.1

portFrBackupPort mandatory

This Port number is the physical port on which
the backup DLCI is being configured.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.3.2.3.1.2

portFrBackupDLCI mandatory

This DLCI number is the backup being configured.

Integer32

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.3.2.3.1.3

portFrBackupGroup mandatory

This Group number is the backup being configured.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.2.3.1.4

portFrBackupWaitTimer mandatory

This is the time after a primary DLCI failure that the
software will wait for this DLCI to become active before
checking the next backup DLCI. If the backup does not
become active before the timer expires, the software …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.173.7.3.2.3.1.5

portFrBackupProtEnab mandatory

This enables or disables the backup protocol on the specified
DLCI. It should be set to yes if and only if the remote device
is an FRX4000 or FRX6000 with the backup protocol enabled on the
remote DLCI connected to this…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.2.3.1.6

portFrBackupRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portFrBackupGroupTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active',…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.2.3.1.7

portBsciAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.1 · 1 row entry · 30 columns

Open in standard view

A list of BSC Interactive ports . The number of
entries will be the number of BSC Interactive ports on the node.

portBsciAdminEntry entry .1.3.6.1.4.1.173.7.3.4.1.1

A BSCI Interactive Port entry containing objects
relating to the port that are configurable by the user.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portBsciAdminBlockedFlag mandatory

Causes the port to be enabled or disabled at node IPL.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.4.1.1.1

portBsciAdminConnector mandatory

Physical port interface connector type.

Enumerationr/w

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1

.1.3.6.1.4.1.173.7.3.4.1.1.2

portBsciAdminSpeed mandatory

Data transmission rate in bits per second.

Integer32r/w

Constraints:
range: 75-19200

.1.3.6.1.4.1.173.7.3.4.1.1.3

portBsciAdminRetransmitInterval mandatory

Length of time before the node will transmit an I-frame
if the previous transmission is not acknowledged.

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.173.7.3.4.1.1.4

portBsciAdminMAXRetransmits mandatory

Maximum number of times the node will attempt to send
an I-frame after a retransmission period expiration.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.173.7.3.4.1.1.5

portBsciAdminMaxBytesPerFrame mandatory

Maximum frame size that will be transmitted on the port.

Integer32r/w

Constraints:
range: 25-4105

.1.3.6.1.4.1.173.7.3.4.1.1.6

portBsciAdminGenerateClock mandatory

Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.7

portBsciAdminRcvClockFromDTE mandatory

Allows the clock to be looped back from the DTE
using the TT (Terminal Timing) signal.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.8

portBsciAdminPadType mandatory

BSCI Pad Type

Enumerationr/w

Enumerated Values:

1	tpad
2	hpad

.1.3.6.1.4.1.173.7.3.4.1.1.9

portBsciAdminUseEBCDIC mandatory

Specifies whether all devices on a line use the same
character set for successive session polls.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.10

portBsciAdminCallInfoInRequestPacket mandatory

Specifies whether the user will have the option of
including call information in a call request packet.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.11

portBsciAdminClearVCOnLastDeviceDown mandatory

Causes the virtual circuit to be cleared when no
terminals are using it.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.12

portBsciAdminTransTextSupported mandatory

Causes all characters transmitted to be treated as data.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.13

portBsciAdminEndToEndAck mandatory

Allows management of acknowledgments end to end across
the network rather than locally at each end.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.14

portBsciAdminFullDuplex mandatory

Specifies full-duplex transmission.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.15

portBsciAdminMultidrop mandatory

Specifies whether transmission will be multidrop.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.16

portBsciAdminSlowPollRetryCount mandatory

Specifies how many times the control unit will be polled
before it is put on the slow poll list.

Integer32r/w

Constraints:
range: 10-150

.1.3.6.1.4.1.173.7.3.4.1.1.17

portBsciAdminSlowPollRetryFreq mandatory

Specifies the number of times active control units will
be polled between pollings on the slow poll list.

Integer32r/w

Constraints:
range: 1-200

.1.3.6.1.4.1.173.7.3.4.1.1.18

portBsciAdminStartSynchChars mandatory

Specifies the number of synchronization characters
that will be added to the beginning of each frame.

Integer32r/w

Constraints:
range: 2-10

.1.3.6.1.4.1.173.7.3.4.1.1.19

portBsciAdminEndPadChars mandatory

Specifies the number of padding characters that will
be added to the end of each frame.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.173.7.3.4.1.1.20

portBsciAdminPollInterval mandatory

Specifies the time between passes through the polling list.

Integer32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.173.7.3.4.1.1.21

portBsciAdminNoResponseTimer mandatory

Activated after transmission of a general poll or a
data frame.

Integer32r/w

Constraints:
range: 2-10

.1.3.6.1.4.1.173.7.3.4.1.1.22

portBsciAdminNoResponseRetryCount mandatory

Specifies how many times the user device will be polled
before control is passed on the next cluster.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.1.1.23

portBsciAdminErrorRetransmitCount mandatory

Specifies the number of times the Netlink device will
resend a block of data after the receiving device has
detected an error in that block.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.1.1.24

portBsciAdminNAKRetryCount mandatory

Specifies the number of times the Netlink device will
send a frame when the receiving device is unable to
acknowledge.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.1.1.25

portBsciAdminBlockCheck mandatory

Sets the redundancy check parameter.

Enumerationr/w

Enumerated Values:

1	crc16
2	even-lrc
3	odd-lrc

.1.3.6.1.4.1.173.7.3.4.1.1.26

portBsciAdminDataMode mandatory

Sets the parity parameter.

Enumerationr/w

Enumerated Values:

1	odd-7bit
2	even-7bit
3	none-8bit

.1.3.6.1.4.1.173.7.3.4.1.1.27

portBsciAdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portBsciAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.4.1.1.28

portBsciAdminAnswerNonConfigured mandatory

Only valid if pad type is HPAD. If yes, the HPAD will
respond to all devices on the line. If no, the HPAD will
respond only to those devices that are configured on the
node.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.29

portBsciAdminActivateConnectionWithoutPoll mandatory

Only valid if pad type is TPAD. If yes, will active the
TPAD connection without a poll of the connected device.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.1.1.30

portBsciOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.2 · 1 row entry · 29 columns

Open in standard view

A list of BSC Interactive ports . The number of
entries will be the number of BSC Interactive ports on the node.

portBsciOperEntry entry .1.3.6.1.4.1.173.7.3.4.2.1

A BSCI Interactive Port entry containing objects
relating to the port that are configurable by the user.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portBsciOperBlockedFlag mandatory

Causes the port to be enabled or disabled at node IPL.

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.4.2.1.1

portBsciOperConnector mandatory

Physical port interface connector type.

Enumeration

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1

.1.3.6.1.4.1.173.7.3.4.2.1.2

portBsciOperSpeed mandatory

Data transmission rate in bits per second.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.4.2.1.3

portBsciOperRetransmitInterval mandatory

Length of time before the node will transmit an I-frame
if the previous transmission is not acknowledged.

Integer32

Constraints:
range: 1-9999

.1.3.6.1.4.1.173.7.3.4.2.1.4

portBsciOperMAXRetransmits mandatory

Maximum number of times the node will attempt to send
an I-frame after a retransmission period expiration.

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.173.7.3.4.2.1.5

portBsciOperMaxBytesPerFrame mandatory

Maximum frame size that will be transmitted on the port.

Integer32

Constraints:
range: 25-4105

.1.3.6.1.4.1.173.7.3.4.2.1.6

portBsciOperGenerateClock mandatory

Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.7

portBsciOperRcvClockFromDTE mandatory

Allows the clock to be looped back from the DTE
using the TT (Terminal Timing) signal.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.8

portBsciOperPadType mandatory

BSCI Pad Type

Enumeration

Enumerated Values:

1	tpad
2	hpad

.1.3.6.1.4.1.173.7.3.4.2.1.9

portBsciOperUseEBCDIC mandatory

Specifies whether all devices on a line use the same
character set for successive session polls.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.10

portBsciOperCallInfoInRequestPacket mandatory

Specifies whether the user will have the option of
including call information in a call request packet.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.11

portBsciOperClearVCOnLastDeviceDown mandatory

Causes the virtual circuit to be cleared when no
terminals are using it.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.12

portBsciOperTransTextSupported mandatory

Causes all characters transmitted to be treated as data.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.13

portBsciOperEndToEndAck mandatory

Allows management of acknowledgments end to end across
the network rather than locally at each end.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.14

portBsciOperFullDuplex mandatory

Specifies full-duplex transmission.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.15

portBsciOperMultidrop mandatory

Specifies whether transmission will be multidrop.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.16

portBsciOperSlowPollRetryCount mandatory

Specifies how many times the control unit will be polled
before it is put on the slow poll list.

Integer32

Constraints:
range: 10-150

.1.3.6.1.4.1.173.7.3.4.2.1.17

portBsciOperSlowPollRetryFreq mandatory

Specifies the number of times active control units will
be polled between pollings on the slow poll list.

Integer32

Constraints:
range: 1-200

.1.3.6.1.4.1.173.7.3.4.2.1.18

portBsciOperStartSynchChars mandatory

Specifies the number of synchronization characters
that will be added to the beginning of each frame.

Integer32

Constraints:
range: 2-10

.1.3.6.1.4.1.173.7.3.4.2.1.19

portBsciOperEndPadChars mandatory

Specifies the number of padding characters that will
be added to the end of each frame.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.173.7.3.4.2.1.20

portBsciOperPollInterval mandatory

Specifies the time between passes through the polling list.

Integer32

Constraints:
range: 100-1000

.1.3.6.1.4.1.173.7.3.4.2.1.21

portBsciOperNoResponseTimer mandatory

Activated after transmission of a general poll or a
data frame.

Integer32

Constraints:
range: 2-10

.1.3.6.1.4.1.173.7.3.4.2.1.22

portBsciOperNoResponseRetryCount mandatory

Specifies how many times the user device will be polled
before control is passed on the next cluster.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.2.1.23

portBsciOperErrorRetransmitCount mandatory

Specifies the number of times the Netlink device will
resend a block of data after the receiving device has
detected an error in that block.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.2.1.24

portBsciOperNAKRetryCount mandatory

Specifies the number of times the Netlink device will
send a frame when the receiving device is unable to
acknowledge.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.3.4.2.1.25

portBsciOperBlockCheck mandatory

Sets the redundancy check parameter.

Enumeration

Enumerated Values:

1	crc16
2	even-lrc
3	odd-lrc

.1.3.6.1.4.1.173.7.3.4.2.1.26

portBsciOperDataMode mandatory

Sets the parity parameter.

Enumeration

Enumerated Values:

1	odd-7bit
2	even-7bit
3	none-8bit

.1.3.6.1.4.1.173.7.3.4.2.1.27

portBsciOperAnswerNonConfigured mandatory

Only valid if pad type is HPAD. If yes, the HPAD will
respond to all devices on the line. If no, the HPAD will
respond only to those devices that are configured on the
node.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.28

portBsciOperActivateConnectionWithoutPoll mandatory

Only valid if pad type is TPAD. If yes, will active the
TPAD connection without a poll of the connected device.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.2.1.29

bsciSubscrAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.3 · 1 row entry · 8 columns

Open in standard view

A list of BSC Interactive port subscribers.

bsciSubscrAdminEntry entry .1.3.6.1.4.1.173.7.3.4.3.1

A BSCI Interactive Port Subscriber entry containing objects
relating to the port that are configurable by the user.

Indexes

nlIfRlp nlIfPort bsciSubscrAdminSequence

Column Syntax OID

bsciSubscrAdminSequence mandatory

Subscriber index for a specific BSCI port subscriber.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.3.4.3.1.1

bsciSubscrAdminLocalID mandatory

Subscriber address of the local end of a BSCI connection.

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.4.3.1.2

bsciSubscrAdminRemoteID mandatory

Subscriber address of the remote end of a BSCI connection.

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.4.3.1.3

bsciSubscrAdminAutocall mandatory

Causes a BSCI TPAD to automatically call its HPAD when
the controller becomes active.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.3.1.4

bsciSubscrAdminAutocallRtyTimer mandatory

Time between autocall retries.

Integer32r/w

Constraints:
range: 15-255

.1.3.6.1.4.1.173.7.3.4.3.1.5

bsciSubscrAdminAutocallMaxRtry mandatory

Maximum number of times an autocall will be sent.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.3.1.6

bsciSubscrAdminConnectionID mandatory

Identifier that will link the BSCI port with a device
configured in the BSCI Devices Table.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.3.1.7

bsciSubscrAdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the bsciDevAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', whic…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.4.3.1.8

bsciSubscrOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.4 · 1 row entry · 7 columns

Open in standard view

A list of BSC Interactive port subscribers.

bsciSubscrOperEntry entry .1.3.6.1.4.1.173.7.3.4.4.1

A BSCI Interactive Port Subscriber entry containing objects
relating to the port that are configurable by the user.

Indexes

nlIfRlp nlIfPort bsciSubscrOperSequence

Column Syntax OID

bsciSubscrOperSequence mandatory

Subscriber index for a specific BSCI port subscriber.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.3.4.4.1.1

bsciSubscrOperLocalID mandatory

Subscriber address of the local end of a BSCI connection.

NlSubscriberAddress

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.4.4.1.2

bsciSubscrOperRemoteID mandatory

Subscriber address of the remote end of a BSCI connection.

NlSubscriberAddress

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.4.4.1.3

bsciSubscrOperAutocall mandatory

Causes a BSCI TPAD to automatically call its HPAD when
the controller becomes active.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.4.1.4

bsciSubscrOperAutocallRtyTimer mandatory

Time between autocall retries.

Integer32

Constraints:
range: 15-255

.1.3.6.1.4.1.173.7.3.4.4.1.5

bsciSubscrOperAutocallMaxRtry mandatory

Maximum number of times an autocall will be sent.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.4.1.6

bsciSubscrOperConnectionID mandatory

Identifier that will link the BSCI port with a device
configured in the BSCI Devices Table.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.4.1.7

bsciDevAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.5 · 1 row entry · 8 columns

Open in standard view

A list of BSC Interactive devices.

bsciDevAdminEntry entry .1.3.6.1.4.1.173.7.3.4.5.1

A BSCI Interactive Device entry containing objects
relating to the device that are configurable by the user.

Indexes

nlIfRlp nlIfPort bsciDevAdminControlUnitID bsciDevAdminDeviceUnitID

Column Syntax OID

bsciDevAdminControlUnitID mandatory

Control Unit identifier.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.173.7.3.4.5.1.1

bsciDevAdminDeviceUnitID mandatory

Device Unit identifier.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.173.7.3.4.5.1.2

bsciDevAdminConnectionID mandatory

The BSCI port connection ID for the device.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.5.1.3

bsciDevAdminSingleUserVC mandatory

Specifies whether each end of the connection is within
a same Control Unit/Device Type pair.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.5.1.4

bsciDevAdminTransTextSupported mandatory

Causes all characters transmitted to be treated as data.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.5.1.5

bsciDevAdminPrinterAttached mandatory

Specifies whether the device has a printer attached.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.5.1.6

bsciDevAdminRowStatus mandatory

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.4.5.1.7

bsciDevAdminDisableStatusRequest mandatory

Determines how the BSCI port will report the status
of the attached device. Normal status- the port will
report what the device reports. No status- the port will
report status only if the device is active. Always act…

Enumerationr/w

Enumerated Values:

1	normal
2	none
3	always-active

.1.3.6.1.4.1.173.7.3.4.5.1.8

bsciDevOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.4.6 · 1 row entry · 7 columns

Open in standard view

A list of BSC Interactive devices.

bsciDevOperEntry entry .1.3.6.1.4.1.173.7.3.4.6.1

A BSCI Interactive Device entry containing objects
relating to the device that are configurable by the user.

Indexes

nlIfRlp nlIfPort bsciDevOperControlUnitID bsciDevOperDeviceUnitID

Column Syntax OID

bsciDevOperControlUnitID mandatory

Control Unit identifier.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.173.7.3.4.6.1.1

bsciDevOperDeviceUnitID mandatory

Device Unit identifier.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.173.7.3.4.6.1.2

bsciDevOperConnectionID mandatory

The BSCI port connection ID for the device.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.4.6.1.3

bsciDevOperSingleUserVC mandatory

Specifies whether each end of the connection is within
a same Control Unit/Device Type pair.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.6.1.4

bsciDevOperTransTextSupported mandatory

Causes all characters transmitted to be treated as data.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.6.1.5

bsciDevOperPrinterAttached mandatory

Specifies whether the device has a printer attached.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.4.6.1.6

bsciDevOperDisableStatusRequest mandatory

Enumeration

Enumerated Values:

1	normal
2	none
3	always-active

.1.3.6.1.4.1.173.7.3.4.6.1.7

portSdlcAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.1 · 1 row entry · 16 columns

Open in standard view

This table contains Netlink Enterprise specific
objects to manage SDLC port. Changing on of the
these parameters may take effect in the operating
port immediately or may wait until the interface is                             restarted depending on the details of the 
implementation.
          
Most of the objects in this read-write table have 
corresponding read-only objects in the 
portSdlcOperTable that return the current 
operating value.
          
The operating values may be different from these 
configured values if a configured parameter was 
configured afterthe interface was started.

portSdlcAdminEntry entry .1.3.6.1.4.1.173.7.3.5.1.1

A list of configured values for an SDLC port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portSdlcAdminCommit obsolete

Writing a value to this object commits the
the SDLC port related modified configuration
values to the database.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.5.1.1.1

portSdlcAdminMAXRetries mandatory

This object defines the max. number of retries
to a non-responding Link station, before putting
the Link station to slow-poll list if it is not
Normal response Mode OR disconnecting the link
station if it is data txfr …

Integer32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.173.7.3.5.1.1.2

portSdlcAdminMAXOut mandatory

This object defines the number of outstanding
frames for triggering window full condition.

Integer32r/w

Constraints:
range: 1-7

.1.3.6.1.4.1.173.7.3.5.1.1.3

portSdlcAdminPadType mandatory

This object defines the SNA
PAD types.

Enumerationr/w

Enumerated Values:

1	xpad
2	tpad
3	hpad
4	npad

.1.3.6.1.4.1.173.7.3.5.1.1.4

portSdlcAdminGenerateClock mandatory

This object defines if the port would
generate clock.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.1.1.5

portSdlcAdminRcvClockFromDTE mandatory

This object defines if the rcv clock will
be used from DTE.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.1.1.6

portSdlcAdminNrz mandatory

This object defines the data encoding
at the physical layer

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.1.1.7

portSdlcAdminPacketSize mandatory

This object defines the packet size of the
X25 layer used by SNA PAD

Integer32r/w

Constraints:
range: 16-4096

.1.3.6.1.4.1.173.7.3.5.1.1.8

portSdlcAdminDisableRequestDisconnect mandatory

This object defines if a Request To
Disconnect(RD) will be sent when remote
PAD clear the connection

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.1.1.9

portSdlcAdminLPDASupport mandatory

This object defines the type LPDA support
on SDLC port.

Enumerationr/w

Enumerated Values:

1	none
2	lpda-1
3	lpda-2

.1.3.6.1.4.1.173.7.3.5.1.1.10

portSdlcAdminConnector mandatory

This object defines the connector type
of the SDLC port.

Enumerationr/w

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1

.1.3.6.1.4.1.173.7.3.5.1.1.11

portSdlcAdminSpeed mandatory

This object defines the speed of the SDLC port. The speed may
only be set to one of a series of reasonable values, and if an attempt is made
to set the speed to a value which is within the valid range but not equal to…

Integer32r/w

Constraints:
range: 75-2048000

.1.3.6.1.4.1.173.7.3.5.1.1.12

portSdlcAdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portSdlcAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.5.1.1.13

portSdlcAdminIdleFillChar mandatory

This object specifies a character that
wll be inserted into the stream when the
SNA link is idle.

Enumerationr/w

Enumerated Values:

1	hex-ff
2	hex-7e

.1.3.6.1.4.1.173.7.3.5.1.1.14

portSdlcAdminInactivityTimer mandatory

This object determines how long the node
will wait with no activity on the port
before it will declare the attached device
down.

Integer32r/w

Constraints:
range: 15-250

.1.3.6.1.4.1.173.7.3.5.1.1.15

portSdlcAdminL1Duplex mandatory

This object determines whether level-1
(physical layer) transmission can be in
one (half duplex) or both (full duplex)
directions at once.

Enumerationr/w

Enumerated Values:

1	full-duplex
2	half-duplex

.1.3.6.1.4.1.173.7.3.5.1.1.16

portSdlcOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.2 · 1 row entry · 15 columns

Open in standard view

This table contains current Netlink enterprise specific
port parameters

portSdlcOperEntry entry .1.3.6.1.4.1.173.7.3.5.2.1

A list of operational values for an SDLC port.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portSdlcOperCommit obsolete

This object is not used.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.5.2.1.1

portSdlcOperMAXRetries mandatory

Integer32

Constraints:
range: 0-99

.1.3.6.1.4.1.173.7.3.5.2.1.2

portSdlcOperMAXOut mandatory

This object defines the number of outstanding
frames for triggering window full condition.

Integer32

Constraints:
range: 1-7

.1.3.6.1.4.1.173.7.3.5.2.1.3

portSdlcOperPadType mandatory

This object defines the SNA
PAD type

Enumeration

Enumerated Values:

1	xpad
2	tpad
3	hpad
4	npad

.1.3.6.1.4.1.173.7.3.5.2.1.4

portSdlcOperGenerateClock mandatory

This object defines if the port would
generate clock.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.2.1.5

portSdlcOperRcvClockFromDTE mandatory

This object defines if the rcv clock will
be used from DTE.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.2.1.6

portSdlcOperNrz mandatory

This object defines the data encoding
at the physical layer

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.2.1.7

portSdlcOperPacketSize mandatory

This object defines the packet size of the
X25 layer used by SNA PAD

Integer32

Constraints:
range: 16-4096

.1.3.6.1.4.1.173.7.3.5.2.1.8

portSdlcOperDisableRequestDisconnect mandatory

This object defines if a Request To
Disconnect(RD) will be sent when remote
PAD clear the connection

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.2.1.9

portSdlcOperLPDASupport mandatory

This object defines the type LPDA support
on SDLC port.

Enumeration

Enumerated Values:

1	none
2	lpda-1
3	lpda-2

.1.3.6.1.4.1.173.7.3.5.2.1.10

portSdlcOperConnector mandatory

This object defines the operational
connector type of the SDLC port.

Enumeration

Enumerated Values:

3	rs232
5	v35
6	rs449
7	rs530
8	x21
10	t1

.1.3.6.1.4.1.173.7.3.5.2.1.11

portSdlcOperSpeed mandatory

This object defines the operational speed
of the SDLC port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.5.2.1.12

portSdlcOperIdleFillChar mandatory

This object specifies a character that
wll be inserted into the stream when the
SNA link is idle.

Enumeration

Enumerated Values:

1	hex-ff
2	hex-7e

.1.3.6.1.4.1.173.7.3.5.2.1.13

portSdlcOperInactivityTimer mandatory

This object determines how long the node
will wait with no activity on the port
before it will declare the attached device
down.

Integer32

Constraints:
range: 15-250

.1.3.6.1.4.1.173.7.3.5.2.1.14

portSdlcOperL1Duplex mandatory

This object determines whether level-1
(physical layer) transmission can be in
one (half duplex) or both (full duplex)
directions at once.

Enumeration

Enumerated Values:

1	full-duplex
2	half-duplex

.1.3.6.1.4.1.173.7.3.5.2.1.15

lSSdlcAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.3 · 1 row entry · 9 columns

Open in standard view

This table contains Enterprise specific Link station
configurable parameters to manage the link stations.

lSSdlcAdminEntry entry .1.3.6.1.4.1.173.7.3.5.3.1

A list of configured values for an SDLC port.

Indexes

nlIfRlp nlIfPort sdlcLSAddress

Column Syntax OID

lSSdlcAdminLocalSub mandatory

This object defines the local subscriber ID
of the Link Station

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.5.3.1.1

lSSdlcAdminRemoteSub mandatory

This object defines the remote subscriber ID
used to connect to remote Link Station

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.5.3.1.2

lSSdlcAdminAutoCall mandatory

This object defines if auto call is enabled for
the link station. If enabled, the link station
will initiate connection establishment, when
appropriate. Else, it will passively listen to
the connection request for estab…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.3.1.3

lSSdlcAdminRetryTime mandatory

This object is used, only when
lSSdlcAdminAutoCall object is yes. This defines
the time interval measured in seconds in which
the connection request is retried

Integer32r/w

Constraints:
range: 15-225

.1.3.6.1.4.1.173.7.3.5.3.1.4

lSSdlcAdminRetryCount mandatory

This object is used, only when
lSSdlcAdminAutoCall object is yes. This defines
the number of times the connection initiation
is retried before given up. The value of Zero(0)
means to try indefinitely

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.3.1.5

lSSdlcAdminLlc2Conversion mandatory

This object defines if this link station
connects to a LLC2 device/host.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.3.1.6

lSSdlcAdminLPDAResourceID mandatory

This objects the resource ID used during
LPDA command support

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.3.1.7

lSSdlcAdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the lSSdlcAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', which…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.5.3.1.8

lSSdlcAdminL2DatMode mandatory

This object determines whether transmission
can be in one (alternate) or two (simultaneous)
directions at the same time.

Enumerationr/w

Enumerated Values:

1	two-way-alternate
2	two-way-simultaneous

.1.3.6.1.4.1.173.7.3.5.3.1.9

lSSdlcOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.4 · 1 row entry · 8 columns

Open in standard view

This table contains the operational parameters of the
SDLC port

lSSdlcOperEntry entry .1.3.6.1.4.1.173.7.3.5.4.1

A list of configured values for an SDLC port.

Indexes

nlIfRlp nlIfPort sdlcLSAddress

Column Syntax OID

lSSdlcOperLocalSub mandatory

This object defines the local subscriber ID
of the Link Station

NlSubscriberAddress

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.5.4.1.1

lSSdlcOperRemoteSub mandatory

This object defines the remote subscriber ID
used to connect to remote Link Station

NlSubscriberAddress

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.3.5.4.1.2

lSSdlcOperAutoCall mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.4.1.3

lSSdlcOperRetryTime mandatory

This object is valid, only when
lSSdlcAdminAutoCall object is yes. This defines
the time interval measured in seconds in which
the connection request is retried

Integer32

Constraints:
range: 15-225

.1.3.6.1.4.1.173.7.3.5.4.1.4

lSSdlcOperRetryCount mandatory

This object is used, only when
lSSdlcAdminAutoCall object is yes. This defines
the number of times the connection initiation
is retried before given up. The value of Zero(0)
means to try indefinitely

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.4.1.5

lSSdlcOperLlc2Conversion mandatory

This object defines if this link station
connects to a LLC2 device/host.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.4.1.6

lSSdlcOperLPDAResourceID mandatory

This objects the resource ID used during
LPDA command support

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.4.1.7

lSSdlcOperL2DatMode mandatory

This object determines whether transmission
can be in one (alternate) or two (simultaneous)
directions at the same time.

Enumeration

Enumerated Values:

1	two-way-alternate
2	two-way-simultaneous

.1.3.6.1.4.1.173.7.3.5.4.1.8

lSSdlcLlc2AdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.5 · 1 row entry · 14 columns

Open in standard view

This table contains the LLC2 related parameters
used to configure LLC2 session, when the SDLC 
station is connected to a LLC2 device at the remote
end

lSSdlcLlc2AdminEntry entry .1.3.6.1.4.1.173.7.3.5.5.1

A list of configured values for an SDLC port.

Indexes

nlIfRlp nlIfPort sdlcLSAddress

Column Syntax OID

lSSdlcLlc2AdminLocalSap mandatory

This object defines Local SAP
address (multiple of 4)

Integer32r/w

Constraints:
range: 0-252

.1.3.6.1.4.1.173.7.3.5.5.1.1

lSSdlcLlc2AdminLocalMac mandatory

This object defines the local MAC address

RFC1213-MIBPhysAddressr/w

Textual Convention: RFC1213-MIBPhysAddress OctetString

.1.3.6.1.4.1.173.7.3.5.5.1.2

lSSdlcLlc2AdminIdblk mandatory

This object defines idblk used in XID

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.173.7.3.5.5.1.3

lSSdlcLlc2AdminIdnum mandatory

This object defines idnum used in XID

Integer32r/w

Constraints:
range: 0-1048575

.1.3.6.1.4.1.173.7.3.5.5.1.4

lSSdlcLlc2AdminLanTi mandatory

This object defines LLC2 inactivity timer
measured in units of seconds

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.173.7.3.5.5.1.5

lSSdlcLlc2AdminLanT1 mandatory

This object defines LLC2 reply timer
measured in units of 100 milliseconds

Integer32r/w

Constraints:
range: 1-250

.1.3.6.1.4.1.173.7.3.5.5.1.6

lSSdlcLlc2AdminLanT2 mandatory

This object defines Receiver Ack Timer
measured in units of milliseconds

Integer32r/w

Constraints:
range: 100-5000

.1.3.6.1.4.1.173.7.3.5.5.1.7

lSSdlcLlc2AdminLanN2 mandatory

This object defines Maximum Retransmissions

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.5.1.8

lSSdlcLlc2AdminLanN3 mandatory

This object defines count of I-format LPDU's
before sending Ack

Integer32r/w

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.3.5.5.1.9

lSSdlcLlc2AdminLanTw mandatory

This object defines Outstanding Frames

Integer32r/w

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.3.5.5.1.10

lSSdlcLlc2AdminBAG mandatory

This object defines bandwidth allocation
group

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.173.7.3.5.5.1.11

lSSdlcLlc2AdminPriority mandatory

This object defines priority for traffic
within the node

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.3.5.5.1.12

lSSdlcLlc2AdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the lSSdlcLlc2AdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', w…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.5.5.1.13

lSSdlcLlc2AdminSuppressXID mandatory

This object prevents (if yes) the returning
of an XID in response to a null XID. This
might be desirable if the remote TPAD is not
running PU 2.1. It should be noted that even
if an XID is sent, an SNRM (Set Normal
Resp…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.5.1.14

lSSdlcLlc2OperTable

table mandatory

.1.3.6.1.4.1.173.7.3.5.6 · 1 row entry · 13 columns

Open in standard view

This table contains operartional parameters related
to LLC2 session of this link station.

lSSdlcLlc2OperEntry entry .1.3.6.1.4.1.173.7.3.5.6.1

A list of configured values for an SDLC port.

Indexes

nlIfRlp nlIfPort sdlcLSAddress

Column Syntax OID

lSSdlcLlc2OperLocalSap mandatory

This object defines Local SAP
address (multiple of 4)

Integer32

Constraints:
range: 0-252

.1.3.6.1.4.1.173.7.3.5.6.1.1

lSSdlcLlc2OperLocalMac mandatory

This object defines the local MAC address

RFC1213-MIBPhysAddress

Textual Convention: RFC1213-MIBPhysAddress OctetString

.1.3.6.1.4.1.173.7.3.5.6.1.2

lSSdlcLlc2OperIdblk mandatory

This object defines idblk used in XID

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.173.7.3.5.6.1.3

lSSdlcLlc2OperIdnum mandatory

This object defines idnum used in XID

Integer32

Constraints:
range: 0-1048575

.1.3.6.1.4.1.173.7.3.5.6.1.4

lSSdlcLlc2OperLanTi mandatory

This object defines LLC2 inactivity timer
measured in units of seconds

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.173.7.3.5.6.1.5

lSSdlcLlc2OperLanT1 mandatory

This object defines LLC2 reply timer
measured in units of 100 milliseconds

Integer32

Constraints:
range: 1-250

.1.3.6.1.4.1.173.7.3.5.6.1.6

lSSdlcLlc2OperLanT2 mandatory

This object defines Receiver Ack Timer
measured in units of milliseconds

Integer32

Constraints:
range: 100-5000

.1.3.6.1.4.1.173.7.3.5.6.1.7

lSSdlcLlc2OperLanN2 mandatory

This object defines Maximum Retransmissions

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.5.6.1.8

lSSdlcLlc2OperLanN3 mandatory

This object defines count of I-format LPDU's
before sending Ack

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.3.5.6.1.9

lSSdlcLlc2OperLanTw mandatory

This object defines Outstanding Frames

Integer32

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.3.5.6.1.10

lSSdlcLlc2OperBAG mandatory

This object defines bandwidth allocation
group

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.173.7.3.5.6.1.11

lSSdlcLlc2OperPriority mandatory

This object defines priority for traffic
within the node

Integer32

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.3.5.6.1.12

lSSdlcLlc2OperSuppressXID mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.5.6.1.13

portT1AdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.7.1 · 1 row entry · 9 columns

Open in standard view

The configuration information pertaining to a T1 port.
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
24 separate channels.

portT1AdminEntry entry .1.3.6.1.4.1.173.7.3.7.1.1

A T1 port entry containing objects relating to T1 ports.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portT1AdminBlockedPortFlag mandatory

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.1.1.1

portT1AdminGenerateClock mandatory

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.1.1.2

portT1AdminFramingMode mandatory

Specifies how this T1 port is to function. ds0AT1 specifies a
24 channelized T1.

Enumerationr/w

Enumerated Values:

1	fullT1
2	ds0aT1

.1.3.6.1.4.1.173.7.3.7.1.1.3

portT1AdminFrameModelSelect mandatory

Enumerationr/w

Enumerated Values:

1	d4
2	esf

.1.3.6.1.4.1.173.7.3.7.1.1.4

portT1AdminLineEncoding mandatory

Enumerationr/w

Enumerated Values:

1	b8zs
2	ami

.1.3.6.1.4.1.173.7.3.7.1.1.5

portT1AdminLineBuildOut mandatory

Enumerationr/w

Enumerated Values:

1	zerodb
2	x133-266ft
3	x266-399ft
4	x399-533ft
5	x533-655ft
6	minus7p5db
7	minus15db
8	minus22p5db

.1.3.6.1.4.1.173.7.3.7.1.1.6

portT1AdminRowStatus mandatory

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.7.1.1.7

portT1AdminProtocolFraming mandatory

Enumerationr/w

Enumerated Values:

1	sync
2	bisync

.1.3.6.1.4.1.173.7.3.7.1.1.8

portT1AdminNRZI mandatory

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.1.1.9

portT1OperTable

table mandatory

.1.3.6.1.4.1.173.7.3.7.2 · 1 row entry · 8 columns

Open in standard view

The configuration information pertaining to a T1 port.
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
24 separate channels.

portT1OperEntry entry .1.3.6.1.4.1.173.7.3.7.2.1

A T1 port entry containing objects relating to T1 ports.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

portT1OperBlockedPortFlag mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.2.1.1

portT1OperGenerateClock mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.2.1.2

portT1OperFramingMode mandatory

Specifies how this T1 port is to function. ds0AT1 specifies a
24 channelized T1.

Enumeration

Enumerated Values:

1	fullT1
2	ds0aT1

.1.3.6.1.4.1.173.7.3.7.2.1.3

portT1OperFrameModelSelect mandatory

Enumeration

Enumerated Values:

1	d4
2	esf

.1.3.6.1.4.1.173.7.3.7.2.1.4

portT1OperLineEncoding mandatory

Enumeration

Enumerated Values:

1	b8zs
2	ami

.1.3.6.1.4.1.173.7.3.7.2.1.5

portT1OperLineBuildOut mandatory

Enumeration

Enumerated Values:

1	zerodb
2	x133-266ft
3	x266-399ft
4	x399-533ft
5	x533-655ft
6	minus7p5db
7	minus15db
8	minus22p5db

.1.3.6.1.4.1.173.7.3.7.2.1.6

portT1OperProtocolFraming mandatory

Enumeration

Enumerated Values:

1	sync
2	bisync

.1.3.6.1.4.1.173.7.3.7.2.1.7

portT1OperNRZI mandatory

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.7.2.1.8

portVoiceAdminTable

table mandatory

.1.3.6.1.4.1.173.7.3.8.1 · 1 row entry · 35 columns

Open in standard view

A list of Voice ports.  The number of entries
will be the number of Voice ports on the node.

portVoiceAdminEntry entry .1.3.6.1.4.1.173.7.3.8.1.1

A Voice Port entry containing objects relating
to the port that are configurable by the user.

Indexes

portVoiceAdminRlpIndex portVoiceAdminPortIndex

Column Syntax OID

portVoiceAdminRlpIndex mandatory

The RLP number of the Voice port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.8.1.1.1

portVoiceAdminPortIndex mandatory

The Port number of the Voice port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.8.1.1.2

portVoiceAdminBlockedFlag mandatory

The flag which causes the port to be enabled or disabled
at node IPL. The port will remain in that state until this
flag is changed and the node is rebooted, or until an on-
line enable or disable is performed.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.1.1.3

portVoiceAdminSpeed mandatory

The speed of the port which is transmitted as part
of a Call Setup frame. A Voice call will be established
if there is enough bandwidth at each end to provide the
minimum configured rate.

Enumerationr/w

Enumerated Values:

1	bps-4800
2	bps-8000
3	bps-32000
4	bps-64000

.1.3.6.1.4.1.173.7.3.8.1.1.4

portVoiceAdminDTMF mandatory

The flag to enable, disable, or specify a time span
over which DTMF (Dual Tone Multi Frequency) tones will
be regenerated.
0 = pass tones transparently to the remote device.
1 = detect incoming tones and regener…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.1.1.5

portVoiceAdminInterface mandatory

The type of interface (in conjunction with the Telephony
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony Type Interface Type
-------------- …

Enumerationr/w

Enumerated Values:

1	em-4w
2	em-2w
3	loop-start
4	ac15-a
6	ac15-b
10	em-4w-te
11	em-2w-te

.1.3.6.1.4.1.173.7.3.8.1.1.6

portVoiceAdminTETimer mandatory

The delay at which the E&M 'E' lead follows the 'M' lead.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.1.1.7

portVoiceAdminLevelIn mandatory

The local voice level into the voice port. This adjusts
the sensitivity of the local voice channel to the signal
from the attached device. The purpose of this is to match
the voice channel dB level to the input signal. …

Integer32r/w

Constraints:
range: -22-7

.1.3.6.1.4.1.173.7.3.8.1.1.8

portVoiceAdminLevelOut mandatory

The local voice level out of the voice port. A more
positive setting produces a higher volume.

Integer32r/w

Constraints:
range: -22-7

.1.3.6.1.4.1.173.7.3.8.1.1.9

portVoiceAdminCallTimer mandatory

The amount of time the node will wait for a response to a
Call Connect or Call Clear request. When the node issues a
request, it will set a timer to the value configured here.
If that timer expires with no response from…

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.173.7.3.8.1.1.10

portVoiceAdminHuntGroup mandatory

The hunt group that includes the voice channel.

Enumerationr/w

Enumerated Values:

1	none
2	a
3	b

.1.3.6.1.4.1.173.7.3.8.1.1.11

portVoiceAdminLongDialPrefix mandatory

The character that will be required preceeding calls using
the long call format. When the user at an attached device
dials a long form number, it must be preceeded by the prefix
character specified here.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.173.7.3.8.1.1.12

portVoiceAdminSLTTimeout mandatory

The time the local port will wait before an actual fax
transmission begins. If there is no fax tone when this
timer expires, the connection will be terminated.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.173.7.3.8.1.1.13

portVoiceAdminLinkDownBusy mandatory

This flag enables or disables automatic busy-out of
channels when the link is down. When enabled, the system
will automatically busy-out channels when the composite
link is down. When disabled, channels remain on-hook w…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.1.1.14

portVoiceAdminFaxSupported mandatory

The flag to indicate whether or not faxes will be
transmitted on the port. If no, all calls will be treated
as voice. If yes, both voice and fax will be transmitted.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.8.1.1.15

portVoiceAdminTelephonyType mandatory

The type of interface (in conjunction with the
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony Type Interface Type
-------------- --------…

Enumerationr/w

Enumerated Values:

1	opx
2	slt
3	em
4	ac15

.1.3.6.1.4.1.173.7.3.8.1.1.16

portVoiceAdminJitter mandatory

The amount of jitter delay.

Integer32r/w

Constraints:
range: 10-255

.1.3.6.1.4.1.173.7.3.8.1.1.17

portVoiceAdminSampleDelay mandatory

The amount of sample delay.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.1.1.18

portVoiceAdminDialTimer mandatory

The delay the node will use to determine when variable
length dialing is complete. (Variable length dialing allows
the user to place a call without entering the configured
number of digits for the speed dial number.)

Integer32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.173.7.3.8.1.1.19

portVoiceAdminAutoDial mandatory

The flag to enable or disable the auto dial feature. Note
that enabling this feature will disable the variable length
dialing feature for this channel.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.1.1.20

portVoiceAdminSuppression mandatory

The silence suppression level. A larger silence suppression
level allows more data channels to operate simultaneously
with the voice channels.

Enumerationr/w

Enumerated Values:

1	very-low
2	low
3	medium
4	high
5	very-high

.1.3.6.1.4.1.173.7.3.8.1.1.21

portVoiceAdminAutoDialNumber mandatory

The number to which the node will attempt to connect when
the handset attached to this port is taken off-hook. This
is applicable only when the Auto Dial feature is enabled.

OctetStringr/w

Constraints:
range: 0-4

.1.3.6.1.4.1.173.7.3.8.1.1.22

portVoiceAdminAutoPoll mandatory

The flag to enable or disable auto polling. This is
applicable only when the Auto Dial feature is enabled.
When enabled, the node periodically polls the destination.
If the poll is not acknowledged, the node will busy-o…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.1.1.23

portVoiceAdminAutoPollTimer mandatory

The frequency with which an Auto Poll will be sent. This
is applicable only when auto poll is enabled.

Integer32r/w

Constraints:
range: 5-30

.1.3.6.1.4.1.173.7.3.8.1.1.24

portVoiceAdminExtDigitsSource mandatory

The source of the extended digits when the user of
attached equipment dials a speed dial number. This is
applicable only when the number of extended dial digits
is greater than zero. When map is specified, extended
dig…

Enumerationr/w

Enumerated Values:

1	map
2	user

.1.3.6.1.4.1.173.7.3.8.1.1.25

portVoiceAdminNumDigitsDelete mandatory

The number of leading dial digits that will be deleted
before a dial string is forwarded. This is primarily used
to delete leading dial digits that may be inserted by an
attached PBX.

Integer32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.173.7.3.8.1.1.26

portVoiceAdminForwardDelay mandatory

The length of a pause that can be inserted in an extended
dial string that is being forwarded. This is applicable only
when forwarded output digits is all or extended. When a comma
is encountered in an extended digits s…

Integer32r/w

Constraints:
range: 0-40

.1.3.6.1.4.1.173.7.3.8.1.1.27

portVoiceAdminForwardedType mandatory

The method how the dial digits will be forwarded. This
is applicable only when forwarded output digits is all
or extended.

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.173.7.3.8.1.1.28

portVoiceAdminForwardedDigits mandatory

The flag indicating which dial digits, if any, to forward.
If none, dial digits are not forwarded to the destination
device when a call is initiated on this channel. If all,
the dialed speed dial number and associated e…

Enumerationr/w

Enumerated Values:

1	none
2	all
3	extended

.1.3.6.1.4.1.173.7.3.8.1.1.29

portVoiceAdminMakeRatio mandatory

The make ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse.

Integer32r/w

Constraints:
range: 20-80

.1.3.6.1.4.1.173.7.3.8.1.1.30

portVoiceAdminBreakRatio mandatory

The break ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse.

Integer32r/w

Constraints:
range: 20-80

.1.3.6.1.4.1.173.7.3.8.1.1.31

portVoiceAdminDTMFOnDuration mandatory

The length of a tone that will be used to produce a
single DTMF digit. This is applicable only when forwarded
output digits is all or extended and forwarded digit type
is DTMF.

Integer32r/w

Constraints:
range: 30-1000

.1.3.6.1.4.1.173.7.3.8.1.1.32

portVoiceAdminDTMFOffDuration mandatory

The length of silence between DTMF tones in a dial digit
string. This is applicable only when forwarded output digits
is all or extended and forwarded digit type is DTMF.

Integer32r/w

Constraints:
range: 30-1000

.1.3.6.1.4.1.173.7.3.8.1.1.33

portVoiceAdminToneType mandatory

The tone type to detect/regenerate for forwarding DTMF/MF.

Enumerationr/w

Enumerated Values:

1	dtmf
2	mf

.1.3.6.1.4.1.173.7.3.8.1.1.34

portVoiceAdminRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the portVoiceAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', wh…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.3.8.1.1.35

portVoiceOperTable

table mandatory

.1.3.6.1.4.1.173.7.3.8.2 · 1 row entry · 34 columns

Open in standard view

A list of Voice ports.  The number of entries
will be the number of Voice ports on the node.

portVoiceOperEntry entry .1.3.6.1.4.1.173.7.3.8.2.1

A Voice Port entry containing objects relating
to the port that are configurable by the user.

Indexes

portVoiceOperRlpIndex portVoiceOperPortIndex

Column Syntax OID

portVoiceOperRlpIndex mandatory

The RLP number of the Voice port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.8.2.1.1

portVoiceOperPortIndex mandatory

The Port number of the Voice port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.3.8.2.1.2

portVoiceOperBlockedFlag mandatory

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.2.1.3

portVoiceOperSpeed mandatory

The speed of the port which is transmitted as part
of a Call Setup frame. A Voice call will be established
if there is enough bandwidth at each end to provide the
minimum configured rate.

Enumeration

Enumerated Values:

1	bps-4800
2	bps-8000
3	bps-32000
4	bps-64000

.1.3.6.1.4.1.173.7.3.8.2.1.4

portVoiceOperDTMF mandatory

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.2.1.5

portVoiceOperInterface mandatory

Enumeration

Enumerated Values:

1	em-4w
2	em-2w
3	loop-start
4	ac15-a
6	ac15-b
10	em-4w-te
11	em-2w-te

.1.3.6.1.4.1.173.7.3.8.2.1.6

portVoiceOperTETimer mandatory

The delay at which the E&M 'E' lead follows the 'M' lead.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.2.1.7

portVoiceOperLevelIn mandatory

Integer32

Constraints:
range: -22-7

.1.3.6.1.4.1.173.7.3.8.2.1.8

portVoiceOperLevelOut mandatory

The local voice level out of the voice port. A more
positive setting produces a higher volume.

Integer32

Constraints:
range: -22-7

.1.3.6.1.4.1.173.7.3.8.2.1.9

portVoiceOperCallTimer mandatory

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.173.7.3.8.2.1.10

portVoiceOperHuntGroup mandatory

The hunt group that includes the voice channel.

Enumeration

Enumerated Values:

1	none
2	a
3	b

.1.3.6.1.4.1.173.7.3.8.2.1.11

portVoiceOperLongDialPrefix mandatory

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.173.7.3.8.2.1.12

portVoiceOperSLTTimeout mandatory

The time the local port will wait before an actual fax
transmission begins. If there is no fax tone when this
timer expires, the connection will be terminated.

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.173.7.3.8.2.1.13

portVoiceOperLinkDownBusy mandatory

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.2.1.14

portVoiceOperFaxSupported mandatory

The flag to indicate whether or not faxes will be
transmitted on the port. If no, all calls will be treated
as voice. If yes, both voice and fax will be transmitted.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.3.8.2.1.15

portVoiceOperTelephonyType mandatory

Enumeration

Enumerated Values:

1	opx
2	slt
3	em
4	ac15

.1.3.6.1.4.1.173.7.3.8.2.1.16

portVoiceOperJitter mandatory

The amount of jitter delay.

Integer32

Constraints:
range: 10-255

.1.3.6.1.4.1.173.7.3.8.2.1.17

portVoiceOperSampleDelay mandatory

The amount of sample delay.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.3.8.2.1.18

portVoiceOperDialTimer mandatory

Integer32

Constraints:
range: 0-10

.1.3.6.1.4.1.173.7.3.8.2.1.19

portVoiceOperAutoDial mandatory

The flag to enable or disable the auto dial feature. Note
that enabling this feature will disable the variable length
dialing feature for this channel.

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.2.1.20

portVoiceOperSuppression mandatory

The silence suppression level. A larger silence suppression
level allows more data channels to operate simultaneously
with the voice channels.

Enumeration

Enumerated Values:

1	very-low
2	low
3	medium
4	high
5	very-high

.1.3.6.1.4.1.173.7.3.8.2.1.21

portVoiceOperAutoDialNumber mandatory

The number to which the node will attempt to connect when
the handset attached to this port is taken off-hook. This
is applicable only when the Auto Dial feature is enabled.

OctetString

Constraints:
range: 0-4

.1.3.6.1.4.1.173.7.3.8.2.1.22

portVoiceOperAutoPoll mandatory

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.3.8.2.1.23

portVoiceOperAutoPollTimer mandatory

The frequency with which an Auto Poll will be sent. This
is applicable only when auto poll is enabled.

Integer32

Constraints:
range: 5-30

.1.3.6.1.4.1.173.7.3.8.2.1.24

portVoiceOperExtDigitsSource mandatory

Enumeration

Enumerated Values:

1	map
2	user

.1.3.6.1.4.1.173.7.3.8.2.1.25

portVoiceOperNumDigitsDelete mandatory

The number of leading dial digits that will be deleted
before a dial string is forwarded. This is primarily used
to delete leading dial digits that may be inserted by an
attached PBX.

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.173.7.3.8.2.1.26

portVoiceOperForwardDelay mandatory

Integer32

Constraints:
range: 0-40

.1.3.6.1.4.1.173.7.3.8.2.1.27

portVoiceOperForwardedType mandatory

The method how the dial digits will be forwarded. This
is applicable only when forwarded output digits is all
or extended.

Enumeration

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.173.7.3.8.2.1.28

portVoiceOperForwardedDigits mandatory

Enumeration

Enumerated Values:

1	none
2	all
3	extended

.1.3.6.1.4.1.173.7.3.8.2.1.29

portVoiceOperMakeRatio mandatory

The make ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse.

Integer32

Constraints:
range: 20-80

.1.3.6.1.4.1.173.7.3.8.2.1.30

portVoiceOperBreakRatio mandatory

The break ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse.

Integer32

Constraints:
range: 20-80

.1.3.6.1.4.1.173.7.3.8.2.1.31

portVoiceOperDTMFOnDuration mandatory

The length of a tone that will be used to produce a
single DTMF digit. This is applicable only when forwarded
output digits is all or extended and forwarded digit type
is DTMF.

Integer32

Constraints:
range: 30-1000

.1.3.6.1.4.1.173.7.3.8.2.1.32

portVoiceOperDTMFOffDuration mandatory

The length of silence between DTMF tones in a dial digit
string. This is applicable only when forwarded output digits
is all or extended and forwarded digit type is DTMF.

Integer32

Constraints:
range: 30-1000

.1.3.6.1.4.1.173.7.3.8.2.1.33

portVoiceOperToneType mandatory

The tone type to detect/regenerate for forwarding DTMF/MF.

Enumeration

Enumerated Values:

1	dtmf
2	mf

.1.3.6.1.4.1.173.7.3.8.2.1.34

nlIfTable

table mandatory

.1.3.6.1.4.1.173.7.4.1 · 1 row entry · 9 columns

Open in standard view

A Table to describe each interface on a node.
This table is indexed by RLP and Port number and can be used to 
identify the corresponding MIB-II ifIndex of a Port as well as
additional port information maintained by Netlink.

nlIfEntry entry .1.3.6.1.4.1.173.7.4.1.1

An Interface entry containing objects relating to interfaces.

Indexes

nlIfRlp nlIfPort

Column Syntax OID

nlIfRlp mandatory

The RLP number on the node. RLP numbers 1-8 are Physical
RLP cards, and RLP number 250, 251 and 252 define IP, IPX and LLC2
interfaces respectively.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.1.1.1

nlIfPort mandatory

The Port number on the RLP. Port numbers 1-8 are
known to be physical ports, and 9-64 are logical ports. If the
RLP number identifies an IP, IPX or LLC2 interface, then the port
number can be 1-257 (IP), 1-64 (IPX), o…

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.1.1.2

nlIfType mandatory

The type of interface

Enumeration

Enumerated Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
200	trunk
201	async
202	bsci
203	logicalPort
204	t1
205	ip
206	ipx
207	llc2
208	voice

.1.3.6.1.4.1.173.7.4.1.1.3

nlIfIndex mandatory

The associated index into the MIB-II ifTable for this
port

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.1.1.4

nlIfTableIndex mandatory

The associated index into an enterprise table used to
describe additional information for this port. See nlIfTableOid as the
pointer to the actual table.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.1.1.5

nlIfTableOid mandatory

The OID of the table Entry that contains additional
information about this port. The OID will point to a specific table
depending on the type of port.

ObjectIdentifier

.1.3.6.1.4.1.173.7.4.1.1.6

nlIfConnectorType mandatory

The physical connector type used for this port. Valid
for ports 1-8 only.

Enumeration

Enumerated Values:

2	none
3	rs232
4	v25bis-dial
5	v35
6	rs449
7	rs530
8	x21
9	csudsu
10	t1
11	e1
13	voice

.1.3.6.1.4.1.173.7.4.1.1.7

nlIfPortStatus mandatory

The status of this port state. Valid for ports 1-64 only.

Enumeration

Enumerated Values:

1	linkUp
2	restarting
3	operational
4	disabled
5	disconnect
6	configured
7	dialReady
8	quiesced
9	failed
10	hardwareFault
11	other
12	ipl
13	na
14	remoteLoopback
15	blueAlarm
16	yellowAlarm
17	redAlarm
18	onHook
19	offHook
20	dialing
21	activeVoiceCall
22	onHookPending

.1.3.6.1.4.1.173.7.4.1.1.8

nlIfPhyPort mandatory

The Underlying Physical Port number on the RLP of this
logical port. Port numbers 1-8 are valid, but this field is only
applicable if the nlIfPort field is 9-64.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.1.1.9

nlIfLlc2LANTable

table mandatory

.1.3.6.1.4.1.173.7.4.2.1 · 1 row entry · 9 columns

Open in standard view

A Table to define LLC2 interfaces over LAN.

nlIfLlc2LANEntry entry .1.3.6.1.4.1.173.7.4.2.1.1

An LLC2 LAN Interface entry containing objects relating
to LLC2 LAN interfaces.

Indexes

nlIfLlc2LANRlp nlIfLlc2LANPort

Column Syntax OID

nlIfLlc2LANRlp mandatory

The RLP number on the node. For LLC2 LAN interfaces,
this must be 252.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.2.1.1.1

nlIfLlc2LANPort mandatory

The Port number on the RLP. For LLC2 LAN interfaces,
this corresponds to the LAN card number.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.2.1.1.2

nlIfLlc2LANType mandatory

The type of the LLC2 interface- either ethernet or
token ring.

Enumerationr/w

Enumerated Values:

1	ethernet
2	token-ring

.1.3.6.1.4.1.173.7.4.2.1.1.3

nlIfLlc2LANCard mandatory

The LAN card that the LLC2 interface is running on.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.173.7.4.2.1.1.4

nlIfLlc2LANID mandatory

Valid only if the type of the LLC2 LAN interface is
token ring. Identifies the token ring adapter to the network.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.173.7.4.2.1.1.5

nlIfLlc2LANInterface mandatory

The LLC2 interface number.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.173.7.4.2.1.1.6

nlIfLlc2LANRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlIfLlc2LANTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', which…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.2.1.1.7

nlIfLlc2LANPriority mandatory

Interface priority- allows setting a priority for traffic
within the node. The higher the number, the higher the priority relative
to other intra-nodal traffic.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.4.2.1.1.8

nlIfLlc2LANBlockedPortFlag mandatory

The blocked port flag.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.2.1.1.9

nlIfLlc2FrTable

table mandatory

.1.3.6.1.4.1.173.7.4.2.2 · 1 row entry · 12 columns

Open in standard view

A Table to define LLC2 interfaces over Frame Relay.

nlIfLlc2FrEntry entry .1.3.6.1.4.1.173.7.4.2.2.1

An LLC2 FR Interface entry containing objects relating
to LLC2 FR interfaces.

Indexes

nlIfLlc2FrRlp nlIfLlc2FrPort nlIfLlc2FrDLCI nlIfLlc2FrFormat

Column Syntax OID

nlIfLlc2FrRlp mandatory

The RLP number on the node.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.2.2.1.1

nlIfLlc2FrPort mandatory

The Port number on the RLP. Port numbers 1-8 are
known to be physical ports, and channels are 193-241.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.4.2.2.1.2

nlIfLlc2FrDLCI mandatory

The DLCI number used to identify the entry in the table.
The range is 16-991.

Integer32

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.4.2.2.1.3

nlIfLlc2FrFormat mandatory

The RFC1490 encapsulation method used for LLC2 traffic.

Enumeration

Enumerated Values:

1	native-llc2
2	tb-8023
3	srb-8025

.1.3.6.1.4.1.173.7.4.2.2.1.4

nlIfLlc2FrPriority mandatory

Interface priority- allows setting a priority for traffic
within the node. The higher the number, the higher the priority relative
to other intra-nodal traffic.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.4.2.2.1.5

nlIfLlc2FrBAG mandatory

Assigns the interface to one of sixteen groups whose parameters
regulate bandwidth usage.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.4.2.2.1.6

nlIfLlc2FrHostMACAddress mandatory

The MAC address of the host or workstation to which
the remote device needs to connect. Valid only if the format is
native-llc2.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.173.7.4.2.2.1.7

nlIfLlc2FrSessionType mandatory

If originated, means that LLC2 connects from the configured
Host MAC address can use this interface. If terminated, connections to
the configured address can use this interface. Valid only if the
format is native-llc2.

Enumerationr/w

Enumerated Values:

1	terminated
2	originated
3	not-applicable

.1.3.6.1.4.1.173.7.4.2.2.1.8

nlIfLlc2FrLANID mandatory

Identifies the ring number used by a frame relay-compliant
source-route bridge at the other end of this PVC. Valid only if the
format is srb-8025.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.173.7.4.2.2.1.9

nlIfLlc2FrInterface mandatory

LLC2 interface number.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.2.2.1.10

nlIfLlc2FrRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlIfLlc2FrTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', which …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.2.2.1.11

nlIfLlc2FrBlockedPortFlag mandatory

The blocked port flag.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.2.2.1.12

ipxStaticRouteConfigTable

table mandatory

.1.3.6.1.4.1.173.7.4.3.1.1 · 1 row entry · 4 columns

Open in standard view

The IPX Static Route Configuration Table

ipxStaticRouteConfigEntry entry .1.3.6.1.4.1.173.7.4.3.1.1.1

Each entry corresponds to one instance of IPX Static Routing on the system

Indexes

ipxStaticRouteConfigCircIndex ipxStaticRouteConfigNetNum

Column Syntax OID

ipxStaticRouteConfigCircIndex mandatory

The unique identifier of the circuit used to reach the
first hop in the static route

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.173.7.4.3.1.1.1.1

ipxStaticRouteConfigNetNum mandatory

The IPX network number of the route's destination

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.173.7.4.3.1.1.1.2

ipxStaticRouteConfigRouter mandatory

The hex value of the node address of the router that will forward a packet when this route is used.
If Novell's IPXWAN is used on the interface, this field will be ignored

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.173.7.4.3.1.1.1.3

ipxStaticRouteConfigRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the ipxStaticRouteTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', w…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.3.1.1.1.4

ipxServConfigTable

table mandatory

.1.3.6.1.4.1.173.7.4.3.1.2 · 1 row entry · 9 columns

Open in standard view

The IPX Static Route Configuration Table

ipxServConfigEntry entry .1.3.6.1.4.1.173.7.4.3.1.2.1

Each entry corresponds to one instance of IPX Static Routing on the system

Indexes

ipxServConfigServiceType ipxServConfigServName

Column Syntax OID

ipxServConfigServiceType mandatory

The Service Type, a SAP service code

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.173.7.4.3.1.2.1.1

ipxServConfigServName mandatory

The Sercice Name, identifies a specific server in the IPX network.

OctetString

Constraints:
range: 1-48

.1.3.6.1.4.1.173.7.4.3.1.2.1.2

ipxServConfigServNetworkAddress mandatory

The IPX network number portion of the IPX address of the server identified by ServName

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.3.1.2.1.3

ipxServConfigServNodeAddress mandatory

The node portion of the IPX address of the service

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.173.7.4.3.1.2.1.4

ipxServConfigServSocketNumber mandatory

The socket portion of the IPX address of the service

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.173.7.4.3.1.2.1.5

ipxServConfigInterveningNetworks mandatory

The number of routers that a packet must pass through t reach the server

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.173.7.4.3.1.2.1.6

ipxServConfigGatewayAddress mandatory

The node address of the router thar will forward a packet

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.173.7.4.3.1.2.1.7

ipxServConfigInterface mandatory

The IPX network number assigned to the interface used to send packets that are destined for this server

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.173.7.4.3.1.2.1.8

ipxServConfigRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the ipxServTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', which in…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.3.1.2.1.9

ipxInterfaceTable

table mandatory

.1.3.6.1.4.1.173.7.4.3.2.6 · 1 row entry · 34 columns

Open in standard view

The IPX Interface Table

ipxInterfaceEntry entry .1.3.6.1.4.1.173.7.4.3.2.6.1

Indexes

ipxInterfaceNumber

Column Syntax OID

ipxInterfaceNumber mandatory

The Interface Number, a sequential number to identify the interface

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.173.7.4.3.2.6.1.1

ipxInterfaceBlockedPortFlag mandatory

This flag causes the IPX interface to be enabled (N) or disabled (Y) at node IPL. The port
will remain in that state until this parameter is changed

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.2

ipxInterfaceType mandatory

The interface type. 802.5 is not valid on FRX4000

Enumerationr/w

Enumerated Values:

1	ethernet
2	eight025
3	x25
4	frl

.1.3.6.1.4.1.173.7.4.3.2.6.1.3

ipxInterfaceFrameType mandatory

The frame type - depends on the interfece type. Valid combinations are:
Ethernet, 802.5 - typeII, raw, llc, snap
Frame relay, X25 - typeII

Enumerationr/w

Enumerated Values:

1	typeII
2	raw
3	llc
4	snap

.1.3.6.1.4.1.173.7.4.3.2.6.1.4

ipxInterfaceMaxTransUnit mandatory

Maximum frame size that can be transmitted or received over the IPX interface.: Valid ranges are:
Ethernet - (45-1518)
802.5 - (48-4096)
Frame relay, X25 - (31-4096)

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.3.2.6.1.5

ipxInterfaceNetworkAddress mandatory

Identifies the local interface to the Novell Network

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.4.3.2.6.1.6

ipxInterfaceBandwidthAllocGroup mandatory

Assigns the IPX interface to one of sixteen groups whose parameters regulate bandwidth usage

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.4.3.2.6.1.7

ipxInterfacePortDiagEnabled mandatory

Enables/Disables the IPX interface's ability to handle Novell diagonistics packets

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.8

ipxInterfaceNetBIOSEnabled mandatory

Determines whether Novell-encapsulated NetBIOS
frames received on the interface will be processed

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.9

ipxInterfaceNetBIOSHops mandatory

Maximum number of hops allowed for routing a Novell-encapsulated NetBIOS frame

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.4.3.2.6.1.10

ipxInterfacePeriodicRIPEnabled mandatory

Determines whether the node will originate periodic IPX Routing Information Protocol messages
from this interface to inform the network that the route through this interface is viable

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.11

ipxInterfacePeriodicRIPTimer mandatory

This is the interval between the periodic IPX RIP broadcasts from this interface

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.173.7.4.3.2.6.1.12

ipxInterfacePeriodicSAPEnabled mandatory

Determines whether the node will originate periodic IPX SAP messages
from this interface to inform the network which SAP entries in the routing table are viable

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.13

ipxInterfacePeriodicSAPTimer mandatory

The interval between the periodic SAP broadcasts from this interface

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.173.7.4.3.2.6.1.14

ipxInterfaceRIPEnabled mandatory

Datermines whether this interface will support RIP proceswsing

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.15

ipxInterfaceRIPAgeTimer mandatory

This is used to delete route entries in the routing information table. The timer starts/restarts
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
longer valid and …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.173.7.4.3.2.6.1.16

ipxInterfaceRIPMaxSize mandatory

Maximum possible RIP packet size

Integer32r/w

Constraints:
range: 54-446

.1.3.6.1.4.1.173.7.4.3.2.6.1.17

ipxInterfaceSAPEnabled mandatory

Determines whether the interface will support SAP or not

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.18

ipxInterfaceSAPAgeTimer mandatory

This is used to delete route entries from the router information table. The timer starts/restars
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
longer valid and …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.173.7.4.3.2.6.1.19

ipxInterfaceTransportTime mandatory

is the time (in 55 milliseconds unit) that will normally take to forward frames out of interface.
Recommmended values are 1 for LAN interfaces and 30 for WAN interfaces. A value of 0 indicates that the
back to back fram…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.173.7.4.3.2.6.1.20

ipxInterfaceSerializationEnabled mandatory

Determines whether NetWare file server serialization security frames will be
forwarded on the interface. These broadcasts frames are used by Novell to hold informations regarding the
licensing of the file server execut…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.21

ipxInterfaceWatchdogSpoofingEnabled mandatory

Determines whether this interface will be used by the local node to respond to (keep alive) messages on
behalf of the client workstations. Novell servers periodically issue these messages to all clients
to determine whe…

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.3.2.6.1.22

ipxInterfaceLanCardNumber mandatory

The card number installed in an FRX6000. The first or only LAN card installed is always 0,
and the second is card 1

Integer32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.173.7.4.3.2.6.1.23

ipxInterfaceWanEnabled mandatory

Determines whether Novell's IPXWAN protocol will be used on the interface. IPXWAN specifies a method
for IPX routers to communicate across WAN links. FRX6000 and FRX4000 implement IPXWAN running over RFC
1490-complain…

Enumerationr/w

Enumerated Values:

1	no
2	yes
3	not-applicable

.1.3.6.1.4.1.173.7.4.3.2.6.1.24

ipxInterfaceSourceSubscriber mandatory

Subscruber id that defines an IPX interface in the node, by associating itself with port 66 (a
number reserved for the IPXinterface) on the RLP that has an IPX installed on it.
.. Valid only for type X.25

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.173.7.4.3.2.6.1.25

ipxInterfaceDestinationSubscriber mandatory

Subscriber ID associated with the physical X.25 port that will be used for the IPX interface .
.. Valid only for type X.25

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.173.7.4.3.2.6.1.26

ipxInterfaceSVCRetryTimer mandatory

The frequency with which calls will be placed to try to establish a connection
.. Valid only for type X.25

Integer32r/w

Constraints:
range: 5-60

.1.3.6.1.4.1.173.7.4.3.2.6.1.27

ipxInterfaceSVCIdleTimer mandatory

is a period that an IPX connection can remain active with no traffic before the connection is cleared.
.. Valid only for type X.25

Integer32r/w

Constraints:
range: 0-5

.1.3.6.1.4.1.173.7.4.3.2.6.1.28

ipxInterfaceMaxVC mandatory

This specifies a number of virtual circuits over which IPX traffic will be transmitted in parallel.
.. Valid only for type X.25

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.3.2.6.1.29

ipxInterfacePVCConnection mandatory

Identifies this interface as one of a PVC.
.. Valid only for type X.25

Enumerationr/w

Enumerated Values:

1	no
2	yes
3	not-applicable

.1.3.6.1.4.1.173.7.4.3.2.6.1.30

ipxInterfaceSourceCard mandatory

Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.173.7.4.3.2.6.1.31

ipxInterfaceSourcePort mandatory

Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.173.7.4.3.2.6.1.32

ipxInterfaceSourceDLCI mandatory

Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay

Integer32r/w

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.4.3.2.6.1.33

ipxInterfaceRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the ipxInterfaceTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', whic…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.3.2.6.1.34

nlIfIpTable

table mandatory

.1.3.6.1.4.1.173.7.4.4.1 · 1 row entry · 28 columns

Open in standard view

A Table to define IP interfaces over frame relay,
X.25, or LAN (ethernet, 802.3, 802.5).

nlIfIpEntry entry .1.3.6.1.4.1.173.7.4.4.1.1

An IP Interface entry containing objects relating
to IP interfaces.

Indexes

nlIfIpInterface

Column Syntax OID

nlIfIpInterface mandatory

The interface number which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
number is NOT the same interface as defined by the
same value of ifI…

Integer32

Constraints:
range: 1-257

.1.3.6.1.4.1.173.7.4.4.1.1.1

nlIfIpMtu mandatory

The maximum size (in bytes) of the data field that can
be used to encapsulate an IP datagram for transmission
over the interface. If the interface type is LAN based,
then the maximum size value cannot exceed 1500.

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.173.7.4.4.1.1.2

nlIfIpNetworkMask mandatory

The mask used during routing to determine the portion
of the address associated with the network.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.1.1.3

nlIfIpRouteMetric mandatory

The number of network hops (network gateways in the
overall path over the internet) associated with this
interface.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.4.4.1.1.4

nlIfIpICMPAddRoutes mandatory

The flag which indicates whether IP may add routes
obtained by ICMP, whose error and control function
is used to send re-direction options back to the
source if problems are discovered.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.4.1.1.5

nlIfIpRIPDeltaUpdates mandatory

The frequency with which RIP messages will be sent to
every neighbor node, containing any changes to the
routing table that occurred since the last full update.

Integer32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.173.7.4.4.1.1.6

nlIfIpRIPFullUpdates mandatory

The frequency with which updates of the entire routing
table will be sent to every neighbor node, via one or
more RIP messages.

Integer32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.173.7.4.4.1.1.7

nlIfIpPriority mandatory

The priority setting for traffic within the node. The
higher the number, the higher the priority relative to
other intra-nodal traffic.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.4.4.1.1.8

nlIfIpBAG mandatory

The bandwidth allocation group to which this interface
is assigned to. This object is only valid when the
interface type is frame relay or proprietary virtual.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.4.4.1.1.9

nlIfIpType mandatory

The type of IP interface.

Enumerationr/w

Enumerated Values:

1	other
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
9	iso88025TokenRing
32	frameRelay
53	propVirtual

.1.3.6.1.4.1.173.7.4.4.1.1.10

nlIfIpSourceAddress mandatory

The IP address of the end-to-end sender.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.1.1.11

nlIfIpDestAddress mandatory

The IP address of the end-to-end receiver. This object
is only valid when the interface type is X.25 or proprietary
virtual, or when the interface type is frame relay and the
inverse ARP flag indicates disabled.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.1.1.12

nlIfIpBroadcastAddress mandatory

The IP address that is used to send to all LAN hosts
on the network. This object is only valid when the
interface type is LAN based.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.1.1.13

nlIfIpLANCard mandatory

The LAN card that contains the interface. This object
is only valid when the interface type is LAN based.

Integer32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.173.7.4.4.1.1.14

nlIfIpSourceSub mandatory

The subscriber ID associated with the source IP
interface port. This object is only valid when the
interface type is X.25.

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.4.4.1.1.15

nlIfIpDestSub mandatory

The subscriber ID associated with the destination IP
interface port. This object is only valid when the
interface type is X.25.

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.4.4.1.1.16

nlIfIpSVCRetryTimer mandatory

The frequency with which calls will be placed to try
to establish a connection. This object is only valid
when the interface type is X.25.

Integer32r/w

Constraints:
range: 5-60

.1.3.6.1.4.1.173.7.4.4.1.1.17

nlIfIpSVCIdleTimer mandatory

The period that an IP connection remains active with
no traffic before the connection is cleared. This object
is only valid when the interface type is X.25.

Integer32r/w

Constraints:
range: 0-5

.1.3.6.1.4.1.173.7.4.4.1.1.18

nlIfIpMaxSVC mandatory

The number of virtual circuits over which IP traffic
will be transmitted in parallel. This object is only
valid when the interface type is X.25.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.4.1.1.19

nlIfIpPVCConnection mandatory

The flag which indicates whether this interface is a
PVC. This object is only valid when the interface type
is X.25.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.4.1.1.20

nlIfIpSourceRlp mandatory

The RLP of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.4.1.1.21

nlIfIpSourcePort mandatory

The port of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.4.1.1.22

nlIfIpSourceDLCI mandatory

The DLCI of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay.

Integer32r/w

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.4.4.1.1.23

nlIfIpRIPSupport mandatory

The RIP support that is being run on the interface.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled
3	receive-only

.1.3.6.1.4.1.173.7.4.4.1.1.24

nlIfIpInverseARP mandatory

The flag which indicates whether inverse ARP is enabled
or disabled. This object is only valid when the interface
type is frame relay.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.4.4.1.1.25

nlIfIpProxyARP mandatory

The flag which indicates whether proxy ARP is enabled
or disabled. This object is only valid when the interface
type is LAN based.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.173.7.4.4.1.1.26

nlIfIpUnnumberedIf mandatory

The flag which indicates whether this interface is an
unnumbered interface (i.e., does not require a specific
source IP address). This object is only valid when the
interface type is frame relay or X.25.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.4.1.1.27

nlIfIpRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlIfIpTable and follows the SNMPv2
RowStatus conventions by supporting the following values:

- `active', which indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.4.1.1.28

nlIfIpSecondaryAddrTable

table mandatory

.1.3.6.1.4.1.173.7.4.4.2 · 1 row entry · 7 columns

Open in standard view

A Table to define secondary IP interfaces on a
LAN (ethernet, 802.3, 802.5) interface.

nlIfIpSecondaryAddrEntry entry .1.3.6.1.4.1.173.7.4.4.2.1

An IP Secondary Address entry containing objects relating
to IP secondary addresses.

Indexes

nlIfIpInterface nlIfIpSecondaryAddrSequence

Column Syntax OID

nlIfIpSecondaryAddrSequence mandatory

The maximum number of secondary IP addresses that may
be configured on an interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.173.7.4.4.2.1.1

nlIfIpSecondaryAddrNetworkMask mandatory

The mask used during routing to determine the portion
of the address associated with the network.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.2.1.2

nlIfIpSecondaryAddrRouteMetric mandatory

The number of network hops (network gateways in the
overall path over the internet) associated with this
interface.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.4.4.2.1.3

nlIfIpSecondaryAddrSourceAddress mandatory

The IP address of the end-to-end sender.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.2.1.4

nlIfIpSecondaryAddrBroadcastAddress mandatory

The IP address that is used to send to all LAN hosts
on the network.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.173.7.4.4.2.1.5

nlIfIpSecondaryAddrRIPSupport mandatory

The RIP support that is being run on the interface.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled
3	receive-only

.1.3.6.1.4.1.173.7.4.4.2.1.6

nlIfIpSecondaryAddrRowStatus mandatory

This variable is used to manage the creation and deletion of
conceptual rows in the nlIfIpSecondaryAddrTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.4.2.1.7

nlIfVoiceTable

table mandatory

.1.3.6.1.4.1.173.7.4.5.1 · 1 row entry · 11 columns

Open in standard view

A Table to define Voice interfaces over frame relay.

nlIfVoiceEntry entry .1.3.6.1.4.1.173.7.4.5.1.1

A Voice Interface entry containing objects relating
to the interface that are configurable by the user.

Indexes

nlIfVoiceInterface

Column Syntax OID

nlIfVoiceInterface mandatory

Integer32

Constraints:
range: 1-129

.1.3.6.1.4.1.173.7.4.5.1.1.1

nlIfVoicePeerNodeType mandatory

The node type for the node at the remote end of the
frame relay connection.

Enumerationr/w

Enumerated Values:

1	netlink
2	act

.1.3.6.1.4.1.173.7.4.5.1.1.2

nlIfVoicePeerNodeNumber mandatory

The node number of the remote device.

Integer32r/w

Constraints:
range: 1-61

.1.3.6.1.4.1.173.7.4.5.1.1.3

nlIfVoicePeerNodePort mandatory

The voice port on the remote device.

Integer32r/w

Constraints:
range: 1-17

.1.3.6.1.4.1.173.7.4.5.1.1.4

nlIfVoiceLocalNodeNumber mandatory

The node number of the local device.

Integer32r/w

Constraints:
range: 1-61

.1.3.6.1.4.1.173.7.4.5.1.1.5

nlIfVoiceLocalNodePort mandatory

The voice port on the local device.

Integer32r/w

Constraints:
range: 1-17

.1.3.6.1.4.1.173.7.4.5.1.1.6

nlIfVoiceFrameRelayRlp mandatory

The RLP of the logical interface of this end of the frame
relay link.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.5.1.1.7

nlIfVoiceFrameRelayPort mandatory

The port of the logical interface of this end of the frame
relay link.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.4.5.1.1.8

nlIfVoiceFrameRelayDLCI mandatory

The DLCI of the logical interface of this end of the frame
relay link.

Integer32r/w

Constraints:
range: 16-991

.1.3.6.1.4.1.173.7.4.5.1.1.9

nlIfVoiceEnableFragment mandatory

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.4.5.1.1.10

nlIfVoiceRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the noIfVoiceTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', which i…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.4.5.1.1.11

nlLocalSubscriberTable

table mandatory

.1.3.6.1.4.1.173.7.5.1 · 1 row entry · 8 columns

Open in standard view

A Table to define each local subscriber.

nlLocalSubscriberEntry entry .1.3.6.1.4.1.173.7.5.1.1

A Local Subscriber entry containing objects relating
to local subscribers.

Indexes

nlLocalSubscriberId

Column Syntax OID

nlLocalSubscriberId mandatory

The Subscriber ID. A valid subscriber ID is a string of
numeric digits represented by their ASCII equivalents. The
ASCII equivalents of the wildcard characters '*' and '?' are
also allowed. A '*' is a wildcard that …

NlSubscriberAddress

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.5.1.1.1

nlLocalSubscriberName mandatory

The Subscriber name. The subscriber name is not accessible from
SNMP, and a blank string is always returned.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.173.7.5.1.1.2

nlLocalSubscriberAlgorithm mandatory

The Subscriber routing algorithm.
The following 4 types of routing algorithms are supported.
1 - round robin selects ports specified cyclicly in numerical
order according to the list of Redirection addresses. If the por…

Enumerationr/w

Enumerated Values:

1	round-robin
2	line-failed
3	line-busy
4	least-lcn

.1.3.6.1.4.1.173.7.5.1.1.3

nlLocalSubscriberSystematicRedirect mandatory

Systematic Redirection.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.5.1.1.4

nlLocalSubscriberRedirectBusy mandatory

Redirect calls according to Redirection Addresses if the
primary subscriber device is busy.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.5.1.1.5

nlLocalSubscriberRedirectOO mandatory

Redirect calls according to Redirection Addresses if the
primary subscriber device is out of order.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.5.1.1.6

nlLocalSubscriberPriority mandatory

Allows setting a priority for traffic within the node.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.5.1.1.7

nlLocalSubscriberRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlLocalSubscriberTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active',…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.5.1.1.8

nlLocalSubscriberRouteTable

table mandatory

.1.3.6.1.4.1.173.7.5.2 · 1 row entry · 5 columns

Open in standard view

A Table to define local subscriber route paths.

nlLocalSubscriberRouteEntry entry .1.3.6.1.4.1.173.7.5.2.1

A Local Subscriber Route entry containing objects relating
to local subscriber routes.

Indexes

nlLocalSubscriberId nlLocalSubscriberRouteIndex

Column Syntax OID

nlLocalSubscriberRouteIndex mandatory

Route path index for a specific subscriber route path.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.173.7.5.2.1.1

nlLocalSubscriberRouteConf mandatory

Flag to indicate if the LP/port routing path to the
subscriber device is configured or not. This object is read-
only. The route is always configured for an entry in the table.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.173.7.5.2.1.2

nlLocalSubscriberRouteLP mandatory

Instance of the LP that makes up the routing path

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.5.2.1.3

nlLocalSubscriberRoutePort mandatory

Instance of the port that makes up the routing path

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.5.2.1.4

nlLocalSubscriberRouteRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlLocalSubscriberRouteTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `act…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.5.2.1.5

nlLocalSubscriberRedirTable

table mandatory

.1.3.6.1.4.1.173.7.5.3 · 1 row entry · 3 columns

Open in standard view

A Table to list local subscriber redirection addresses.

nlLocalSubscriberRedirEntry entry .1.3.6.1.4.1.173.7.5.3.1

A Local Subscriber Redirection Address entry containing
objects relating to local subscriber redirection addresses.

Indexes

nlLocalSubscriberId nlLocalSubscriberRedirIndex

Column Syntax OID

nlLocalSubscriberRedirIndex mandatory

Redirection entry index for a local subscriber.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.173.7.5.3.1.1

nlLocalSubscriberRedirAddr mandatory

Subscriber redirection address.

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.5.3.1.2

nlLocalSubscriberRedirRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlLocalSubscriberRedirTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `act…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.5.3.1.3

nlLlc2HostTable

table mandatory

.1.3.6.1.4.1.173.7.6.1 · 1 row entry · 17 columns

Open in standard view

A Table to define LLC2 host entries.

nlLlc2HostEntry entry .1.3.6.1.4.1.173.7.6.1.1

An LLC2 Host entry containing objects relating to
LLC2 hosts.

Indexes

nlLlc2HostGroup nlLlc2HostIndex

Column Syntax OID

nlLlc2HostIndex mandatory

LLC2 Host Index

Integer32

Constraints:
range: 1-251

.1.3.6.1.4.1.173.7.6.1.1.1

nlLlc2HostMACAddress mandatory

The LLC2 Host MAC Address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.173.7.6.1.1.2

nlLlc2HostSessionType mandatory

The mode in which the Host is operating

Enumerationr/w

Enumerated Values:

1	originated
2	terminated

.1.3.6.1.4.1.173.7.6.1.1.3

nlLlc2HostT1ReplyTimer mandatory

Reply Timer used to detect a failure of the Remote node.

Integer32r/w

Constraints:
range: 1-250

.1.3.6.1.4.1.173.7.6.1.1.4

nlLlc2HostT2RecvAckTimer mandatory

Receive Ack Timer used to delay sending an
acknowledgement of a received information LPDU.

Integer32r/w

Constraints:
range: 100-5000

.1.3.6.1.4.1.173.7.6.1.1.5

nlLlc2HostTiInactivityTimer mandatory

Timer used to detect inoperative condition of the
remote link station or transmission medium.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.173.7.6.1.1.6

nlLlc2HostN3NumberLPDUs mandatory

The number of Information LPDUs that need to be received
before an acknowledgement is sent.

Integer32r/w

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.6.1.1.7

nlLlc2HostTwNumberOutstanding mandatory

Maximum number of sequentially numbered information
LPDUs that can be outstanding at any time.

Integer32r/w

Constraints:
range: 1-127

.1.3.6.1.4.1.173.7.6.1.1.8

nlLlc2HostN2ExpiredT1LPDUCount mandatory

Maximum number of LPDU retransmissions occur following
the expiration of Timer T1.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.173.7.6.1.1.9

nlLlc2HostPriority mandatory

Traffic priorities within the node.

Integer32r/w

Constraints:
range: 0-9

.1.3.6.1.4.1.173.7.6.1.1.10

nlLlc2HostBAG mandatory

Bandwidth Allocation group to which the LLC2 Host belongs.
This object is read-only. Bandwidth allocation groups do not apply
to LLC2 hosts.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.6.1.1.11

nlLlc2HostRoutingSubscriberId mandatory

LLC2 hosts Routing Subscriber Id

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.6.1.1.12

nlLlc2HostSrcMACAddressMask mandatory

LLC2 Host's Source MAC Address Mask

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.173.7.6.1.1.13

nlLlc2HostAccess mandatory

Specifies different type(s) of interface(s) that can be
used for connections to a terminated host session.

Enumeration

Enumerated Values:

1	lan
2	frameRelay
3	tokenRing
4	ethernet
5	all
6	not-applicable

.1.3.6.1.4.1.173.7.6.1.1.14

nlLlc2HostRowStatus mandatory

Row status convention for LLC2 Host entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.6.1.1.15

nlLlc2HostInterface mandatory

LLC2 interface number associated with this host entry, always
300 for non-FRX7000.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.6.1.1.16

nlLlc2HostGroup mandatory

Traffic group associated with LLC2 interface, always 1 for
non-FRX7000.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.173.7.6.1.1.17

nlLlc2TermConnectionTable

table mandatory

.1.3.6.1.4.1.173.7.6.2 · 1 row entry · 5 columns

Open in standard view

A Table to describe LLC2 Terminated Host Connections.

nlLlc2TermConnectionEntry entry .1.3.6.1.4.1.173.7.6.2.1

An LLC2 Terminated Host Connection entry containing
objects relating to LLC2 terminated host connections.

Indexes

nlLlc2HostGroup nlLlc2HostIndex nlLlc2TermConnectionSequence

Column Syntax OID

nlLlc2TermConnectionSequence mandatory

LLC2 Host connection Sequence number

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.6.2.1.1

nlLlc2TermConnectionHSAP mandatory

Service Access point used to connect to the Host

Integer32r/w

Constraints:
range: 4-254

.1.3.6.1.4.1.173.7.6.2.1.2

nlLlc2TermConnectionLocalSubscriberId mandatory

LLC2 Host Connection's Local Subscriber Id

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.6.2.1.3

nlLlc2TermConnectionRemoteSubscriberId mandatory

LLC2 Host Connection's Remote Subscriber Id

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.6.2.1.4

nlLlc2TermConnectionRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlLlc2TermConnectionTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `activ…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.6.2.1.5

nlLlc2OrigConnectionTable

table mandatory

.1.3.6.1.4.1.173.7.6.3 · 1 row entry · 10 columns

Open in standard view

A Table to describe LLC2 Originated Host Connections.

nlLlc2OrigConnectionEntry entry .1.3.6.1.4.1.173.7.6.3.1

An LLC2 Originated Host Connection entry containing
objects relating to LLC2 originated host connections.

Indexes

nlLlc2HostGroup nlLlc2HostIndex nlLlc2OrigConnectionSequence

Column Syntax OID

nlLlc2OrigConnectionSequence mandatory

LLC2 Host connection Sequence number

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.6.3.1.1

nlLlc2OrigConnectionHSAP mandatory

Service Access point used to connect to the Host

Integer32r/w

Constraints:
range: 4-254

.1.3.6.1.4.1.173.7.6.3.1.2

nlLlc2OrigConnectionType mandatory

Specifies Remote subscriber device type

Enumerationr/w

Enumerated Values:

1	sdlc
2	llc2

.1.3.6.1.4.1.173.7.6.3.1.3

nlLlc2OrigConnectionLocalSubscriberId mandatory

LLC2 Host Connection's Local Subscriber Id

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.6.3.1.4

nlLlc2OrigConnectionRemoteSubscriberId mandatory

LLC2 Host Connection's Remote Subscriber Id

NlSubscriberAddressr/w

Textual Convention: NlSubscriberAddress OctetString

Type Constraints:
range: 1..15

.1.3.6.1.4.1.173.7.6.3.1.5

nlLlc2OrigConnectionIDBLK mandatory

This field is obsolete

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.6.3.1.6

nlLlc2OrigConnectionIDNUM mandatory

This field is obsolete

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.6.3.1.7

nlLlc2OrigConnectionMAXDATA mandatory

This field is obsolete

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.6.3.1.8

nlLlc2OrigConnectionMAXIN mandatory

This field is obsolete

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.173.7.6.3.1.9

nlLlc2OrigConnectionRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the nlLlc2OrigConnectionTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `activ…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.6.3.1.10

pinStatusTable

table mandatory

.1.3.6.1.4.1.173.7.7.4 · 1 row entry · 3 columns

Open in standard view

A Table to describe the status of each pin on a 
physical port. This table is indexed by RLP and Port

portPinEntry entry .1.3.6.1.4.1.173.7.7.4.1

A port pin entry containing objects relating to ports.

Indexes

portPinRlp portPinPort

Column	Syntax	OID
portPinRlp mandatory The RLP number on the node	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.7.4.1.1`
portPinPort mandatory The Port number on the RLP. Port numbers 0-7 are known to be physical ports.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.7.4.1.2`
portPinStatus mandatory The status of all pins for this physical port. There is one octet value for each of the pins. Each octet value is defined as follows: 00 = unknown 01 = active 02 = inactive 03 = unused	OctetString	`.1.3.6.1.4.1.173.7.7.4.1.3`

rlpStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.2 · 1 row entry · 7 columns

Open in standard view

A Table to describe Statistics on each RLP

rlpStatsEntry entry .1.3.6.1.4.1.173.7.8.1.2.1

An RLP statistics entry containing objects relating
to RLP statistics.

Indexes

rlpStatsIndex

Column	Syntax	OID
rlpStatsIndex mandatory The RLP number	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.2.1.1`
rlpStatsQMessages mandatory The number of frames queued on the RLP	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.2`
rlpStatsUsedBuffers mandatory The percentage of total buffers available being used at the moment of inquiry	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.3`
rlpStatsInFrames mandatory The number of frames received.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.4`
rlpStatsOutFrames mandatory The number of frames transmitted.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.5`
rlpStatsFrameRejects mandatory The number of frames rejected.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.6`
rlpStatsFrameRetransmits mandatory The number of frames retransmitted . If this value is consistently greater than zero and there are no other problems, then increase the retransmission parameter.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.2.1.7`

portStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.3 · 1 row entry · 9 columns

Open in standard view

A Table to describe Statistics on each RLP

portStatsEntry entry .1.3.6.1.4.1.173.7.8.1.3.1

A port statistics entry containing objects relating
to port statistics.

Indexes

portStatsRlpIndex portStatsIndex

Column	Syntax	OID
portStatsRlpIndex mandatory The RLP number	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.3.1.1`
portStatsIndex mandatory The Port number	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.3.1.2`
portStatsInFrames mandatory The number of frames received.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.3`
portStatsOutFrames mandatory The number of frames transmitted.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.4`
portStatsFrameRetrans mandatory The number of frames retransmitted.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.5`
portStatsFCSErrors mandatory The number of Frame Check Sequence (FCS) errors. A value consistently greater than zero indicates line probelms.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.6`
portStatsLogicalRejects mandatory The sum of Rejects and Frame Rejects. A value consistently greater than zero indicates line probelms.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.7`
portStatsInPercentUtils mandatory The ratio of non-flag characters to total characters being received by the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.8`
portStatsOutPercentUtils mandatory The ration of non-flag characters to total characters being transmitted by the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.3.1.9`

frStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.4.1 · 1 row entry · 13 columns

Open in standard view

A Table to describe Frame Relay Frame Level Statistics on each Port

frStatsEntry entry .1.3.6.1.4.1.173.7.8.1.4.1.1

A frame relay port statistics entry containing objects
relating to frame relay port statistics.

Indexes

frStatsRlpIndex frStatsPortIndex

Column	Syntax	OID
frStatsRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.1`
frStatsPortIndex mandatory The Port number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.2`
frStatsTxDEFrames mandatory The number of frames transmitted on the port with the Discard Eligibility bit set.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.3`
frStatsRxDEFrames mandatory The number of frames received on the port with the discard eligibility bit set.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.4`
frStatsTxFECNFrames mandatory The of number of frames transmitted on the port with FECN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.5`
frStatsRxFECNFrames mandatory The number of frames received on the port with FECN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.6`
frStatsTxBECNFrames mandatory The number of frames transmitted on the port with BECN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.7`
frStatsRxBECNFrames mandatory The number of frames received on the port with BECN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.8`
frStatsTxLMIFrames mandatory The number of LMI frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.9`
frStatsRxLMIFrames mandatory The number of LMI frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.10`
frStatsTxANXDFrames mandatory The number of AnnexD frames transmitted on the port	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.11`
frStatsRxANXDFrames mandatory The number of AnnexD frames received on the port	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.12`
frStatsTotDiscFrames mandatory The total number of discarded frames on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.1.1.13`

x25TxStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.4.2 · 1 row entry · 11 columns

Open in standard view

A Table to describe X25 Frame Level Txmit Statistics on each Port

x25TxStatsEntry entry .1.3.6.1.4.1.173.7.8.1.4.2.1

An X25 frame level transmit statistics entry containing
objects relating to x25 frame level transmit statistics.

Indexes

x25TxRlpIndex x25TxPortIndex

Column	Syntax	OID
x25TxRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.1`
x25TxPortIndex mandatory The Port number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.2`
x25TxSABMFrames mandatory The number of SABM's transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.3`
x25TxUAFrames mandatory The number of UA Frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.4`
x25TxDISCFrames mandatory The number of DISC Frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.5`
x25TxDMFrames mandatory The number of DM frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.6`
x25TxFRMRFrames mandatory The of Number of FRMR frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.7`
x25TxREJFrames mandatory The number of Reject Frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.8`
x25TxRRFrames mandatory The number of RR frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.9`
x25TxRNRFrames mandatory The number of RNR Frames transmitted on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.10`
x25TxINFOFrames mandatory The number of INFO Frames transmitted on the port	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.2.1.11`

x25RxStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.4.3 · 1 row entry · 11 columns

Open in standard view

A Table to describe X25 Frame Level Rxmit Statistics on each Port

x25RxStatsEntry entry .1.3.6.1.4.1.173.7.8.1.4.3.1

An X25 frame level receive statistics entry containing
objects relating to x25 frame level receive statistics.

Indexes

x25RxRlpIndex x25RxPortIndex

Column	Syntax	OID
x25RxRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.1`
x25RxPortIndex mandatory The Port number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.2`
x25RxSABMFrames mandatory The number of SABM's received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.3`
x25RxUAFrames mandatory The number of UA Frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.4`
x25RxDISCFrames mandatory The number of DISC Frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.5`
x25RxDMFrames mandatory The number of DM frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.6`
x25RxFRMRFrames mandatory The of Number of FRMR frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.7`
x25RxREJFrames mandatory The number of Reject Frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.8`
x25RxRRFrames mandatory The number of RR frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.9`
x25RxRNRFrames mandatory The number of RNR Frames received on the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.10`
x25RxINFOFrames mandatory The number of INFO Frames received on the port	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.4.3.1.11`

t1StatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.7.1 · 1 row entry · 17 columns

Open in standard view

A Table to describe T1 Statistics.

t1StatsEntry entry .1.3.6.1.4.1.173.7.8.1.7.1.1

A T1 port statistics entry containing objects relating
to T1 port statistics.

Indexes

t1StatsRlpIndex t1StatsPortIndex

Column	Syntax	OID
t1StatsRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.1`
t1StatsPortIndex mandatory The Port Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.2`
t1StatsRcvFrames mandatory Total received frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.3`
t1StatsXmitFrames mandatory Total transmitted frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.4`
t1StatsLCVCnt mandatory Line code violation count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.5`
t1StatsPCVRErrs mandatory PCVR Bit error count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.6`
t1StatsOOSCnt mandatory Multiframe out of sync count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.7`
t1StatsBlueAlarms mandatory Blue alarm count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.8`
t1StatsYellowAlarms mandatory Yellow alarm count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.9`
t1StatsRedAlarms mandatory Red alarm count.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.10`
t1StatsRcvUsage mandatory Receive port utilization.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.11`
t1StatsXmitUsage mandatory Transmit port utilization.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.12`
t1StatsXmitAbortFrames mandatory Total aborted transmit frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.13`
t1StatsRcvAbortFrames mandatory Total aborted receive frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.14`
t1StatsRcvOverruns mandatory Total receive overruns.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.15`
t1StatsRcvErrors mandatory Total bad receives.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.16`
t1StatsRcvChannelErrors mandatory Total bad receives.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.7.1.1.17`

ds0aStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.8.1 · 1 row entry · 8 columns

Open in standard view

A Table to describe DS0A Statistics.

ds0aStatsEntry entry .1.3.6.1.4.1.173.7.8.1.8.1.1

A DS0A port statistics entry containing objects relating
to DS0A port statistics.

Indexes

ds0aStatsRlpIndex ds0aStatsPortIndex ds0aStatsChannelIndex

Column	Syntax	OID
ds0aStatsRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.1`
ds0aStatsPortIndex mandatory The Port Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.2`
ds0aStatsChannelIndex mandatory The Channel Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.3`
ds0aStatsXmitFrames mandatory Total transmitted frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.4`
ds0aStatsRcvFrames mandatory Total received frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.5`
ds0aStatsRcvAbortFrames mandatory Total receive aborted frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.6`
ds0aStatsRcvOverruns mandatory Total receive overruns.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.7`
ds0aStatsRcvErrors mandatory Total receive errors.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.8.1.1.8`

voiceStatsTable

table mandatory

.1.3.6.1.4.1.173.7.8.1.9.1 · 1 row entry · 12 columns

Open in standard view

A Table to describe Voice over Frame Relay Statistics.

voiceStatsEntry entry .1.3.6.1.4.1.173.7.8.1.9.1.1

A voice port statistics entry containing objects relating
to voice port statistics.

Indexes

voiceStatsRlpIndex voiceStatsPortIndex

Column	Syntax	OID
voiceStatsRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.1`
voiceStatsPortIndex mandatory The Port Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.2`
voiceStatsRxCalls mandatory The Number of Calls Received from the Network.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.3`
voiceStatsTxCalls mandatory The Number of Calls Transmitted to the Network.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.4`
voiceStatsRxCallsAccepts mandatory The Number of Call Accepts Received from the Network.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.5`
voiceStatsTxCallsAccepts mandatory The Number of Call Accepts Transmitted to the Network.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.6`
voiceStatsRxClears mandatory The Number of Call Receives cleared.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.7`
voiceStatsTxClears mandatory The Number of Call Transmitts cleared.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.8`
voiceStatsBusyCalls mandatory The Number of calls which received Busy indication.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.9`
voiceStatsCallTimeouts mandatory The Number of calls which transmitted time-out to the network.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.10`
voiceStatsRxCongestions mandatory The number of congestion management frames Received.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.11`
voiceStatsTxCongestions mandatory The number of congestion management frames Transmitted.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.173.7.8.1.9.1.1.12`

rlpThreshTable

table mandatory

.1.3.6.1.4.1.173.7.8.2.1 · 1 row entry · 7 columns

Open in standard view

A Table to describe Statistic thresholds on each RLP

rlpThreshEntry entry .1.3.6.1.4.1.173.7.8.2.1.1

An RLP statistics threshold entry containing objects
relating to RLP statistics thresholds.

Indexes

rlpThreshRlpIndex

Column	Syntax	OID
rlpThreshRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.1`
rlpThreshPercntBufInUse mandatory The threshold for Percent of Buffers in use on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.2`
rlpThreshMsgQueueLen mandatory The threshold for Percent of Buffers in use on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.3`
rlpThreshRxFramesPerSec mandatory The threshold for Rcvd frames per second on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.4`
rlpThreshTxFramesPerSec mandatory The threshold for Txmitted frames per second on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.5`
rlpThreshRejFramesPerSec mandatory The threshold for Rejected Frames per second on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.6`
rlpThreshRtxFramesPerSec mandatory The threshold for Retransmitted frames per second on the RLP	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.1.1.7`

portThreshTable

table mandatory

.1.3.6.1.4.1.173.7.8.2.2 · 1 row entry · 11 columns

Open in standard view

A Table to describe Statistic thresholds on each port

portThreshEntry entry .1.3.6.1.4.1.173.7.8.2.2.1

A port statistics threshold entry containing objects
relating to port statistics thresholds.

Indexes

portThreshRlpIndex portThreshIndex

Column	Syntax	OID
portThreshRlpIndex mandatory The RLP Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.1`
portThreshIndex mandatory The Port Number.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.2`
portThreshRxFramesPerSec mandatory The threshold for Rcvd frames per second on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.3`
portThreshTxFramesPerSec mandatory The threshold for Txmitted frames per second on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.4`
portThreshRtxFramesPerSec mandatory The threshold for Retransmitted frames per second on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.5`
portThreshFCSErrPerSec mandatory The threshold for FCS errors per second on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.6`
portThreshLogRejPerSec mandatory The threshold for Logical Rejects per second on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.7`
portThreshTxErrorRatio mandatory The threshold for Txmit error ratio on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.8`
portThreshRxErrorRatio mandatory The threshold for Rcv error ratio on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.9`
portThreshTxPercentUtl mandatory The threshold for Txmit percent utilization on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.10`
portThreshRxPercentUtl mandatory The threshold for Rcv percent utilization on the port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.173.7.8.2.2.1.11`

voiceSpeedDialTable

table mandatory

.1.3.6.1.4.1.173.7.12.8 · 1 row entry · 4 columns

Open in standard view

A list of speed-dial numbers.

voiceSpeedDialEntry entry .1.3.6.1.4.1.173.7.12.8.1

A Voice Speed Dial entry containing objects relating to
the speed-dial number that are configurable by the user.

Indexes

voiceSpeedDialDigits

Column Syntax OID

voiceSpeedDialDigits mandatory

The speed-dial number. A question mark wildcard can be used
for any digit, and an asterisk wildcard can be used for any
number of digits.

OctetString

Constraints:
range: 1-4

.1.3.6.1.4.1.173.7.12.8.1.1

voiceSpeedDialLongDialMap mandatory

The number for which the speed-dial number is a shortcut.

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.173.7.12.8.1.2

voiceSpeedDialExtDialStr mandatory

The extended set of digits that will be forwarded with the
call if portVoiceOperExtDigitsSource in the physical port
record is set to Map.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.173.7.12.8.1.3

voiceSpeedDialRowStatus mandatory

This variable is used to manage the creation and deletion
of conceptual rows in the voiceSpeedDialTable and follows the
SNMPv2 RowStatus conventions by supporting the following values:

- `active', wh…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.173.7.12.8.1.4