nlIfIpSourceSub
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.4.4.1.1.15
Object
column
mandatory
r/w
NlSubscriberAddress
The subscriber ID associated with the source IP interface port. This object is only valid when the interface type is X.25.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.4.4.1.1.15- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nlIfIpEntry
- Table
- nlIfIpTable
- Siblings
- 27
Syntax
NlSubscriberAddress
- Source
- NlSubscriberAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 1..15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nlIfIpInterface mandatory The interface number which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
number is NOT the same inter… | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.1 |
| nlIfIpType mandatory The type of IP interface. | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.10 |
| nlIfIpSourceAddress mandatory The IP address of the end-to-end sender. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.173.7.4.4.1.1.11 |
| nlIfIpDestAddress mandatory The IP address of the end-to-end receiver. This object
is only valid when the interface type is X.25 or proprietary
virtual, or when the interface type is frame relay and the
inve… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.173.7.4.4.1.1.12 |
| nlIfIpBroadcastAddress mandatory The IP address that is used to send to all LAN hosts
on the network. This object is only valid when the
interface type is LAN based. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.173.7.4.4.1.1.13 |
| nlIfIpLANCard mandatory The LAN card that contains the interface. This object
is only valid when the interface type is LAN based. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.14 |
| nlIfIpDestSub mandatory The subscriber ID associated with the destination IP
interface port. This object is only valid when the
interface type is X.25. | column | NlSubscriberAddress | .1.3.6.1.4.1.173.7.4.4.1.1.16 |
| nlIfIpSVCRetryTimer mandatory The frequency with which calls will be placed to try
to establish a connection. This object is only valid
when the interface type is X.25. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.17 |
| nlIfIpSVCIdleTimer mandatory The period that an IP connection remains active with
no traffic before the connection is cleared. This object
is only valid when the interface type is X.25. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.18 |
| nlIfIpMaxSVC mandatory The number of virtual circuits over which IP traffic
will be transmitted in parallel. This object is only
valid when the interface type is X.25. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.19 |
| nlIfIpMtu mandatory The maximum size (in bytes) of the data field that can
be used to encapsulate an IP datagram for transmission
over the interface. If the interface type is LAN based,
then the maxi… | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.2 |
| nlIfIpPVCConnection mandatory The flag which indicates whether this interface is a
PVC. This object is only valid when the interface type
is X.25. | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.20 |
| nlIfIpSourceRlp mandatory The RLP of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.21 |
| nlIfIpSourcePort mandatory The port of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.22 |
| nlIfIpSourceDLCI mandatory The DLCI of the logical interface of this end of the frame
relay link. This object is only valid when the interface
type is frame relay. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.23 |
| nlIfIpRIPSupport mandatory The RIP support that is being run on the interface. | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.24 |
| nlIfIpInverseARP mandatory The flag which indicates whether inverse ARP is enabled
or disabled. This object is only valid when the interface
type is frame relay. | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.25 |
| nlIfIpProxyARP mandatory The flag which indicates whether proxy ARP is enabled
or disabled. This object is only valid when the interface
type is LAN based. | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.26 |
| nlIfIpUnnumberedIf mandatory The flag which indicates whether this interface is an
unnumbered interface (i.e., does not require a specific
source IP address). This object is only valid when the
interface type… | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.27 |
| nlIfIpRowStatus mandatory This variable is used to manage the creation and deletion
of conceptual rows in the nlIfIpTable and follows the SNMPv2
RowStatus conventions by supporting the following values:
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.173.7.4.4.1.1.28 |
| nlIfIpNetworkMask mandatory The mask used during routing to determine the portion
of the address associated with the network. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.173.7.4.4.1.1.3 |
| nlIfIpRouteMetric mandatory The number of network hops (network gateways in the
overall path over the internet) associated with this
interface. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.4 |
| nlIfIpICMPAddRoutes mandatory The flag which indicates whether IP may add routes
obtained by ICMP, whose error and control function
is used to send re-direction options back to the
source if problems are disco… | column | Enumeration | .1.3.6.1.4.1.173.7.4.4.1.1.5 |
| nlIfIpRIPDeltaUpdates mandatory The frequency with which RIP messages will be sent to
every neighbor node, containing any changes to the
routing table that occurred since the last full update. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.6 |
| nlIfIpRIPFullUpdates mandatory The frequency with which updates of the entire routing
table will be sent to every neighbor node, via one or
more RIP messages. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.7 |
| nlIfIpPriority mandatory The priority setting for traffic within the node. The
higher the number, the higher the priority relative to
other intra-nodal traffic. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.8 |
| nlIfIpBAG mandatory The bandwidth allocation group to which this interface
is assigned to. This object is only valid when the
interface type is frame relay or proprietary virtual. | column | Integer32 | .1.3.6.1.4.1.173.7.4.4.1.1.9 |