portSdlcOperEntry
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.5.2.1
Object
row
mandatory
A list of operational values for an SDLC port.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.5.2.1- Type
- row
- Status
- mandatory
- Parent
- portSdlcOperTable
- Table
- portSdlcOperTable
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portSdlcOperCommit obsolete This object is not used. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.1 |
| portSdlcOperLPDASupport mandatory This object defines the type LPDA support
on SDLC port. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.10 |
| portSdlcOperConnector mandatory This object defines the operational
connector type of the SDLC port. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.11 |
| portSdlcOperSpeed mandatory This object defines the operational speed
of the SDLC port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.12 |
| portSdlcOperIdleFillChar mandatory This object specifies a character that
wll be inserted into the stream when the
SNA link is idle. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.13 |
| portSdlcOperInactivityTimer mandatory This object determines how long the node
will wait with no activity on the port
before it will declare the attached device
down. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.14 |
| portSdlcOperL1Duplex mandatory This object determines whether level-1
(physical layer) transmission can be in
one (half duplex) or both (full duplex)
directions at once. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.15 |
| portSdlcOperMAXRetries mandatory This object defines the max. number of retries
to a non-responding Link station, before putting
the Link station to slow-poll list if it is not
Normal response Mode OR disconnecti… | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.2 |
| portSdlcOperMAXOut mandatory This object defines the number of outstanding
frames for triggering window full condition. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.3 |
| portSdlcOperPadType mandatory This object defines the SNA
PAD type | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.4 |
| portSdlcOperGenerateClock mandatory This object defines if the port would
generate clock. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.5 |
| portSdlcOperRcvClockFromDTE mandatory This object defines if the rcv clock will
be used from DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.6 |
| portSdlcOperNrz mandatory This object defines the data encoding
at the physical layer | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.7 |
| portSdlcOperPacketSize mandatory This object defines the packet size of the
X25 layer used by SNA PAD | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.8 |
| portSdlcOperDisableRequestDisconnect mandatory This object defines if a Request To
Disconnect(RD) will be sent when remote
PAD clear the connection | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| nlIfRlp mandatory The RLP number on the node. RLP numbers 1-8 are Physical
RLP cards, and RLP number 250, 251 and 252 define IP, IPX and LLC2
interfaces respectively. | column | Integer32 | .1.3.6.1.4.1.173.7.4.1.1.1 |
| nlIfPort mandatory The Port number on the RLP. Port numbers 1-8 are
known to be physical ports, and 9-64 are logical ports. If the
RLP number identifies an IP, IPX or LLC2 interface, then the port … | column | Integer32 | .1.3.6.1.4.1.173.7.4.1.1.2 |