ipxInterfaceSVCIdleTimer
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.4.3.2.6.1.28
Object
column
mandatory
r/w
Integer32
is a period that an IPX connection can remain active with no traffic before the connection is cleared. .. Valid only for type X.25
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.4.3.2.6.1.28- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ipxInterfaceEntry
- Table
- ipxInterfaceTable
- Siblings
- 33
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-5
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipxInterfaceNumber mandatory The Interface Number, a sequential number to identify the interface | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.1 |
| ipxInterfaceNetBIOSHops mandatory Maximum number of hops allowed for routing a Novell-encapsulated NetBIOS frame | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.10 |
| ipxInterfacePeriodicRIPEnabled mandatory Determines whether the node will originate periodic IPX Routing Information Protocol messages
from this interface to inform the network that the route through this interface is vi… | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.11 |
| ipxInterfacePeriodicRIPTimer mandatory This is the interval between the periodic IPX RIP broadcasts from this interface | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.12 |
| ipxInterfacePeriodicSAPEnabled mandatory Determines whether the node will originate periodic IPX SAP messages
from this interface to inform the network which SAP entries in the routing table are viable | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.13 |
| ipxInterfacePeriodicSAPTimer mandatory The interval between the periodic SAP broadcasts from this interface | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.14 |
| ipxInterfaceRIPEnabled mandatory Datermines whether this interface will support RIP proceswsing | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.15 |
| ipxInterfaceRIPAgeTimer mandatory This is used to delete route entries in the routing information table. The timer starts/restarts
each time an entry is created/updated. If the timer expires, the router will assum… | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.16 |
| ipxInterfaceRIPMaxSize mandatory Maximum possible RIP packet size | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.17 |
| ipxInterfaceSAPEnabled mandatory Determines whether the interface will support SAP or not | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.18 |
| ipxInterfaceSAPAgeTimer mandatory This is used to delete route entries from the router information table. The timer starts/restars
each time an entry is created/updated. If the timer expires, the router will assum… | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.19 |
| ipxInterfaceBlockedPortFlag mandatory This flag causes the IPX interface to be enabled (N) or disabled (Y) at node IPL. The port
will remain in that state until this parameter is changed | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.2 |
| ipxInterfaceTransportTime mandatory is the time (in 55 milliseconds unit) that will normally take to forward frames out of interface.
Recommmended values are 1 for LAN interfaces and 30 for WAN interfaces. A value o… | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.20 |
| ipxInterfaceSerializationEnabled mandatory Determines whether NetWare file server serialization security frames will be
forwarded on the interface. These broadcasts frames are used by Novell to hold informations regarding… | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.21 |
| ipxInterfaceWatchdogSpoofingEnabled mandatory Determines whether this interface will be used by the local node to respond to (keep alive) messages on
behalf of the client workstations. Novell servers periodically issue these … | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.22 |
| ipxInterfaceLanCardNumber mandatory The card number installed in an FRX6000. The first or only LAN card installed is always 0,
and the second is card 1 | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.23 |
| ipxInterfaceWanEnabled mandatory Determines whether Novell's IPXWAN protocol will be used on the interface. IPXWAN specifies a method
for IPX routers to communicate across WAN links. FRX6000 and FRX4000 implemen… | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.24 |
| ipxInterfaceSourceSubscriber mandatory Subscruber id that defines an IPX interface in the node, by associating itself with port 66 (a
number reserved for the IPXinterface) on the RLP that has an IPX installed on it.
.… | column | OctetString | .1.3.6.1.4.1.173.7.4.3.2.6.1.25 |
| ipxInterfaceDestinationSubscriber mandatory Subscriber ID associated with the physical X.25 port that will be used for the IPX interface .
.. Valid only for type X.25 | column | OctetString | .1.3.6.1.4.1.173.7.4.3.2.6.1.26 |
| ipxInterfaceSVCRetryTimer mandatory The frequency with which calls will be placed to try to establish a connection
.. Valid only for type X.25 | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.27 |
| ipxInterfaceMaxVC mandatory This specifies a number of virtual circuits over which IPX traffic will be transmitted in parallel.
.. Valid only for type X.25 | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.29 |
| ipxInterfaceType mandatory The interface type. 802.5 is not valid on FRX4000 | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.3 |
| ipxInterfacePVCConnection mandatory Identifies this interface as one of a PVC.
.. Valid only for type X.25 | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.30 |
| ipxInterfaceSourceCard mandatory Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.31 |
| ipxInterfaceSourcePort mandatory Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.32 |
| ipxInterfaceSourceDLCI mandatory Identifies the location of this end of the frame relay IPX interface.
.. Valid only for frame relay | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.33 |
| ipxInterfaceRowStatus mandatory This variable is used to manage the creation and deletion
of conceptual rows in the ipxInterfaceTable and follows the
SNMPv2 RowStatus conventions by supporting the following valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.173.7.4.3.2.6.1.34 |
| ipxInterfaceFrameType mandatory The frame type - depends on the interfece type. Valid combinations are:
Ethernet, 802.5 - typeII, raw, llc, snap
Frame relay, X25 - typeII | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.4 |
| ipxInterfaceMaxTransUnit mandatory Maximum frame size that can be transmitted or received over the IPX interface.: Valid ranges are:
Ethernet - (45-1518)
802.5 - (48-4096)
Frame r… | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.5 |
| ipxInterfaceNetworkAddress mandatory Identifies the local interface to the Novell Network | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.6 |
| ipxInterfaceBandwidthAllocGroup mandatory Assigns the IPX interface to one of sixteen groups whose parameters regulate bandwidth usage | column | Integer32 | .1.3.6.1.4.1.173.7.4.3.2.6.1.7 |
| ipxInterfacePortDiagEnabled mandatory Enables/Disables the IPX interface's ability to handle Novell diagonistics packets | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.8 |
| ipxInterfaceNetBIOSEnabled mandatory Determines whether Novell-encapsulated NetBIOS
frames received on the interface will be processed | column | Enumeration | .1.3.6.1.4.1.173.7.4.3.2.6.1.9 |