nlIfIpDestAddress

NETLINK-SPECIFIC-MIB · .1.3.6.1.4.1.173.7.4.4.1.1.12
MIB view Table view

Object

column mandatory r/w SNMPv2-SMIIpAddress 
The IP address of the end-to-end receiver. This object
is only valid when the interface type is X.25 or proprietary
virtual, or when the interface type is frame relay and the
inverse ARP flag indicates disabled.

Context

MIB
NETLINK-SPECIFIC-MIB
OID
.1.3.6.1.4.1.173.7.4.4.1.1.12
Type
column
Access
readwrite
Status
mandatory
Parent
nlIfIpEntry
Table
nlIfIpTable
Siblings
27

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nlIfIpInterface mandatory
The interface number which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this number is NOT the same inter…
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.1
nlIfIpType mandatory
The type of IP interface.
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.10
nlIfIpSourceAddress mandatory
The IP address of the end-to-end sender.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.173.7.4.4.1.1.11
nlIfIpBroadcastAddress mandatory
The IP address that is used to send to all LAN hosts on the network. This object is only valid when the interface type is LAN based.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.173.7.4.4.1.1.13
nlIfIpLANCard mandatory
The LAN card that contains the interface. This object is only valid when the interface type is LAN based.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.14
nlIfIpSourceSub mandatory
The subscriber ID associated with the source IP interface port. This object is only valid when the interface type is X.25.
columnNlSubscriberAddress.1.3.6.1.4.1.173.7.4.4.1.1.15
nlIfIpDestSub mandatory
The subscriber ID associated with the destination IP interface port. This object is only valid when the interface type is X.25.
columnNlSubscriberAddress.1.3.6.1.4.1.173.7.4.4.1.1.16
nlIfIpSVCRetryTimer mandatory
The frequency with which calls will be placed to try to establish a connection. This object is only valid when the interface type is X.25.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.17
nlIfIpSVCIdleTimer mandatory
The period that an IP connection remains active with no traffic before the connection is cleared. This object is only valid when the interface type is X.25.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.18
nlIfIpMaxSVC mandatory
The number of virtual circuits over which IP traffic will be transmitted in parallel. This object is only valid when the interface type is X.25.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.19
nlIfIpMtu mandatory
The maximum size (in bytes) of the data field that can be used to encapsulate an IP datagram for transmission over the interface. If the interface type is LAN based, then the maxi…
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.2
nlIfIpPVCConnection mandatory
The flag which indicates whether this interface is a PVC. This object is only valid when the interface type is X.25.
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.20
nlIfIpSourceRlp mandatory
The RLP of the logical interface of this end of the frame relay link. This object is only valid when the interface type is frame relay.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.21
nlIfIpSourcePort mandatory
The port of the logical interface of this end of the frame relay link. This object is only valid when the interface type is frame relay.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.22
nlIfIpSourceDLCI mandatory
The DLCI of the logical interface of this end of the frame relay link. This object is only valid when the interface type is frame relay.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.23
nlIfIpRIPSupport mandatory
The RIP support that is being run on the interface.
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.24
nlIfIpInverseARP mandatory
The flag which indicates whether inverse ARP is enabled or disabled. This object is only valid when the interface type is frame relay.
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.25
nlIfIpProxyARP mandatory
The flag which indicates whether proxy ARP is enabled or disabled. This object is only valid when the interface type is LAN based.
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.26
nlIfIpUnnumberedIf mandatory
The flag which indicates whether this interface is an unnumbered interface (i.e., does not require a specific source IP address). This object is only valid when the interface type…
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.27
nlIfIpRowStatus mandatory
This variable is used to manage the creation and deletion of conceptual rows in the nlIfIpTable and follows the SNMPv2 RowStatus conventions by supporting the following values: …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.173.7.4.4.1.1.28
nlIfIpNetworkMask mandatory
The mask used during routing to determine the portion of the address associated with the network.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.173.7.4.4.1.1.3
nlIfIpRouteMetric mandatory
The number of network hops (network gateways in the overall path over the internet) associated with this interface.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.4
nlIfIpICMPAddRoutes mandatory
The flag which indicates whether IP may add routes obtained by ICMP, whose error and control function is used to send re-direction options back to the source if problems are disco…
columnEnumeration.1.3.6.1.4.1.173.7.4.4.1.1.5
nlIfIpRIPDeltaUpdates mandatory
The frequency with which RIP messages will be sent to every neighbor node, containing any changes to the routing table that occurred since the last full update.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.6
nlIfIpRIPFullUpdates mandatory
The frequency with which updates of the entire routing table will be sent to every neighbor node, via one or more RIP messages.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.7
nlIfIpPriority mandatory
The priority setting for traffic within the node. The higher the number, the higher the priority relative to other intra-nodal traffic.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.8
nlIfIpBAG mandatory
The bandwidth allocation group to which this interface is assigned to. This object is only valid when the interface type is frame relay or proprietary virtual.
columnInteger32.1.3.6.1.4.1.173.7.4.4.1.1.9