portSdlcOperConnector
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.5.2.1.11
Object
column
mandatory
Enumeration
This object defines the operational connector type of the SDLC port.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.5.2.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portSdlcOperEntry
- Table
- portSdlcOperTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
3 | rs232 |
5 | v35 |
6 | rs449 |
7 | rs530 |
8 | x21 |
10 | t1 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portSdlcOperCommit obsolete This object is not used. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.1 |
| portSdlcOperLPDASupport mandatory This object defines the type LPDA support
on SDLC port. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.10 |
| portSdlcOperSpeed mandatory This object defines the operational speed
of the SDLC port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.12 |
| portSdlcOperIdleFillChar mandatory This object specifies a character that
wll be inserted into the stream when the
SNA link is idle. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.13 |
| portSdlcOperInactivityTimer mandatory This object determines how long the node
will wait with no activity on the port
before it will declare the attached device
down. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.14 |
| portSdlcOperL1Duplex mandatory This object determines whether level-1
(physical layer) transmission can be in
one (half duplex) or both (full duplex)
directions at once. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.15 |
| portSdlcOperMAXRetries mandatory This object defines the max. number of retries
to a non-responding Link station, before putting
the Link station to slow-poll list if it is not
Normal response Mode OR disconnecti… | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.2 |
| portSdlcOperMAXOut mandatory This object defines the number of outstanding
frames for triggering window full condition. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.3 |
| portSdlcOperPadType mandatory This object defines the SNA
PAD type | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.4 |
| portSdlcOperGenerateClock mandatory This object defines if the port would
generate clock. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.5 |
| portSdlcOperRcvClockFromDTE mandatory This object defines if the rcv clock will
be used from DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.6 |
| portSdlcOperNrz mandatory This object defines the data encoding
at the physical layer | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.7 |
| portSdlcOperPacketSize mandatory This object defines the packet size of the
X25 layer used by SNA PAD | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.2.1.8 |
| portSdlcOperDisableRequestDisconnect mandatory This object defines if a Request To
Disconnect(RD) will be sent when remote
PAD clear the connection | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.2.1.9 |