portX25OperThruptClassNeg
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.1.6.1.3
Object
column
mandatory
Enumeration
A flag which ,if set, permists negotiation of the throughput class for either direction of data transmission on a per call basis. If N is selected, the configured Max Throughput Class value is used. If Y, any throughput class in a call packet (up to the Max Thruput Class) is used.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.1.6.1.3- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portX25OperEntry
- Table
- portX25OperTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | no |
2 | yes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portX25OperBlockedFlag mandatory A flag which when set, means the port should not be
enabled after a boot-up of the node. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.1 |
| portX25OperDefPktSize mandatory This is the size that will be assigned to an incoming call
setup packet if the packet does not request a packet size. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.10 |
| portX25OperMaxWinSize mandatory This is the maximum number of unacknowledged packets
per logical channel that can pass through this port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.11 |
| portX25OperDefWinSize mandatory This size will be assigned to an incoming call
setup packet if the packet doesn't request a window size. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.12 |
| portX25OperMaxThruptClass mandatory This specifies the default throughput class that will be
inserted into a Call Request packet if Thruput Class
negotiation is not enabled or if a thruput class is not
requested in … | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.13 |
| portX25OperCUGPref mandatory This flag, if set, indicates the port belongs to at least
one CUG. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.14 |
| portX25OperCUGIndex mandatory This number is an index into a Closed User Group table
which identifies the default Closed User Group for the
port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.15 |
| portX25OperCUGIncAccess mandatory This flag, when set, indicates whether this port will
be able to receive calls from outside its CUGs. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.16 |
| portX25OperCUGOutAccess mandatory This flag, when set, indicates whether this port will
be able to make calls outside its CUGs. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.17 |
| portX25OperFlowCtrlNeg mandatory A flag which if set, permits negotiation of
the flow control parameters on a per call basis.
If N is selected, the default packet and window
sizes will be used. If Y is selected, … | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.2 |
| portX25OperLocChgPrev mandatory If Y is selected, no calls can be charged to
port. Incoming calls from the network with
reverse charge specified will be rejected. Outgoing
calls will insert reverse charge in th… | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.4 |
| portX25OperRevChgAccpt mandatory A flag, if set, that authorizes transmission of
incoming calls that request the reverse charge
facility. If N is selected, and a call requests
it, it will not be transmitted. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.5 |
| portX25OperFastSelAccpt mandatory A flag, if set, that authorizes transmission of
incoming calls that request the Fast Select
facility. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.6 |
| portX25OperInCallBar mandatory An X25 facility that prevents transmission of
incoming calls to the local DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.7 |
| portX25OperOutCallBar mandatory An X25 facility that prevents transmission of
incoming calls to the local DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.6.1.8 |
| portX25OperMaxPktSize mandatory The maximum data packet size that will be allowed to pass
through this port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.6.1.9 |