portPhyX25AdminConnector
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.1.1.1.1
Object
column
mandatory
r/w
Enumeration
Physical port interface connector type.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- portPhyX25AdminEntry
- Table
- portPhyX25AdminTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
3 | rs232 |
5 | v35 |
6 | rs449 |
7 | rs530 |
8 | x21 |
10 | t1 |
11 | e1 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portPhyX25AdminTrunkGroup mandatory This variable contains a string of 8 bytes, with each
byte indicating 8 ports on an RLP that may be a part of
a trunk group. Since a TurboFrad has only 1 RLP, only the
first byte … | column | OctetString | .1.3.6.1.4.1.173.7.3.1.1.1.10 |
| portPhyX25AdminRowStatus mandatory This variable is used to manage the creation and deletion
of conceptual rows in the portPhyX25AdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following v… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.173.7.3.1.1.1.11 |
| portPhyX25AdminSpeed mandatory This object defines the speed of the X25 port. The speed may
only be set to one of a series of reasonable values, and if an attempt
is made to set the speed to a value which is … | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.1.1.2 |
| portPhyX25AdminGenerateClock mandatory Specifies whether the port will generate the clock
necessary to synchronize traffic over the link. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.1.1.3 |
| portPhyX25AdminRcvClockFromDTE mandatory This object defines whether the receive clock
will be used from the DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.1.1.4 |
| portPhyX25AdminDialOut mandatory This flag indicates whether the port is connected to a dial
modem, and whethter connections will be initiated through
dial-in or dial-out calls. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.1.1.5 |
| portPhyX25AdminInactivityTimer mandatory This timer defines in minutes, the period of inactivity
allowed between calls. Once the timer expires, the port
is disabled untill the next call is placed, if a Dial out
port, or … | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.1.1.6 |
| portPhyX25AdminDisconnectTimer mandatory This timer defines, in seconds, the length of time a
dial-in port will remain disabled after expiration of the
InActivity Timer. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.1.1.7 |
| portPhyX25AdminSetupTimer mandatory This timer determines the length of time, in seconds, that
a response must be received by the port, after entering the
Linkup state. If a response is not received, the port enter… | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.1.1.8 |
| portPhyX25AdminTrunkFlag mandatory This flag, when set, indicates the port is associated
with a network trunk group. It will be disabled/enabled
if the network trunk is not operational. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.1.1.9 |