portSdlcAdminLPDASupport
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.5.1.1.10
Object
column
mandatory
r/w
Enumeration
This object defines the type LPDA support on SDLC port.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.5.1.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- portSdlcAdminEntry
- Table
- portSdlcAdminTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | lpda-1 |
3 | lpda-2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portSdlcAdminCommit obsolete Writing a value to this object commits the
the SDLC port related modified configuration
values to the database. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.1 |
| portSdlcAdminConnector mandatory This object defines the connector type
of the SDLC port. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.11 |
| portSdlcAdminSpeed mandatory This object defines the speed of the SDLC port. The speed may
only be set to one of a series of reasonable values, and if an attempt is made
to set the speed to a value which is… | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.12 |
| portSdlcAdminRowStatus mandatory This variable is used to manage the creation and deletion
of conceptual rows in the portSdlcAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following val… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.173.7.3.5.1.1.13 |
| portSdlcAdminIdleFillChar mandatory This object specifies a character that
wll be inserted into the stream when the
SNA link is idle. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.14 |
| portSdlcAdminInactivityTimer mandatory This object determines how long the node
will wait with no activity on the port
before it will declare the attached device
down. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.15 |
| portSdlcAdminL1Duplex mandatory This object determines whether level-1
(physical layer) transmission can be in
one (half duplex) or both (full duplex)
directions at once. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.16 |
| portSdlcAdminMAXRetries mandatory This object defines the max. number of retries
to a non-responding Link station, before putting
the Link station to slow-poll list if it is not
Normal response Mode OR disconnecti… | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.2 |
| portSdlcAdminMAXOut mandatory This object defines the number of outstanding
frames for triggering window full condition. | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.3 |
| portSdlcAdminPadType mandatory This object defines the SNA
PAD types. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.4 |
| portSdlcAdminGenerateClock mandatory This object defines if the port would
generate clock. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.5 |
| portSdlcAdminRcvClockFromDTE mandatory This object defines if the rcv clock will
be used from DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.6 |
| portSdlcAdminNrz mandatory This object defines the data encoding
at the physical layer | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.7 |
| portSdlcAdminPacketSize mandatory This object defines the packet size of the
X25 layer used by SNA PAD | column | Integer32 | .1.3.6.1.4.1.173.7.3.5.1.1.8 |
| portSdlcAdminDisableRequestDisconnect mandatory This object defines if a Request To
Disconnect(RD) will be sent when remote
PAD clear the connection | column | Enumeration | .1.3.6.1.4.1.173.7.3.5.1.1.9 |