portVoiceOperAutoDial
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.8.2.1.20
Object
column
mandatory
Enumeration
The flag to enable or disable the auto dial feature. Note that enabling this feature will disable the variable length dialing feature for this channel.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.8.2.1.20- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portVoiceOperEntry
- Table
- portVoiceOperTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portVoiceOperRlpIndex mandatory The RLP number of the Voice port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.1 |
| portVoiceOperCallTimer mandatory The amount of time the node will wait for a response to a
Call Connect or Call Clear request. When the node issues a
request, it will set a timer to the value configured here.
If … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.10 |
| portVoiceOperHuntGroup mandatory The hunt group that includes the voice channel. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.11 |
| portVoiceOperLongDialPrefix mandatory The character that will be required preceeding calls using
the long call format. When the user at an attached device
dials a long form number, it must be preceeded by the prefix
c… | column | OctetString | .1.3.6.1.4.1.173.7.3.8.2.1.12 |
| portVoiceOperSLTTimeout mandatory The time the local port will wait before an actual fax
transmission begins. If there is no fax tone when this
timer expires, the connection will be terminated. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.13 |
| portVoiceOperLinkDownBusy mandatory This flag enables or disables automatic busy-out of
channels when the link is down. When enabled, the system
will automatically busy-out channels when the composite
link is down. … | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.14 |
| portVoiceOperFaxSupported mandatory The flag to indicate whether or not faxes will be
transmitted on the port. If no, all calls will be treated
as voice. If yes, both voice and fax will be transmitted. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.15 |
| portVoiceOperTelephonyType mandatory The type of interface (in conjunction with the
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony Type In… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.16 |
| portVoiceOperJitter mandatory The amount of jitter delay. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.17 |
| portVoiceOperSampleDelay mandatory The amount of sample delay. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.18 |
| portVoiceOperDialTimer mandatory The delay the node will use to determine when variable
length dialing is complete. (Variable length dialing allows
the user to place a call without entering the configured
number … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.19 |
| portVoiceOperPortIndex mandatory The Port number of the Voice port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.2 |
| portVoiceOperSuppression mandatory The silence suppression level. A larger silence suppression
level allows more data channels to operate simultaneously
with the voice channels. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.21 |
| portVoiceOperAutoDialNumber mandatory The number to which the node will attempt to connect when
the handset attached to this port is taken off-hook. This
is applicable only when the Auto Dial feature is enabled. | column | OctetString | .1.3.6.1.4.1.173.7.3.8.2.1.22 |
| portVoiceOperAutoPoll mandatory The flag to enable or disable auto polling. This is
applicable only when the Auto Dial feature is enabled.
When enabled, the node periodically polls the destination.
If the poll i… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.23 |
| portVoiceOperAutoPollTimer mandatory The frequency with which an Auto Poll will be sent. This
is applicable only when auto poll is enabled. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.24 |
| portVoiceOperExtDigitsSource mandatory The source of the extended digits when the user of
attached equipment dials a speed dial number. This is
applicable only when the number of extended dial digits
is greater than ze… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.25 |
| portVoiceOperNumDigitsDelete mandatory The number of leading dial digits that will be deleted
before a dial string is forwarded. This is primarily used
to delete leading dial digits that may be inserted by an
attached … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.26 |
| portVoiceOperForwardDelay mandatory The length of a pause that can be inserted in an extended
dial string that is being forwarded. This is applicable only
when forwarded output digits is all or extended. When a comm… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.27 |
| portVoiceOperForwardedType mandatory The method how the dial digits will be forwarded. This
is applicable only when forwarded output digits is all
or extended. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.28 |
| portVoiceOperForwardedDigits mandatory The flag indicating which dial digits, if any, to forward.
If none, dial digits are not forwarded to the destination
device when a call is initiated on this channel. If all,
the d… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.29 |
| portVoiceOperBlockedFlag mandatory The flag which causes the port to be enabled or disabled
at node IPL. The port will remain in that state until this
flag is changed and the node is rebooted, or until an on-
line … | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.3 |
| portVoiceOperMakeRatio mandatory The make ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.30 |
| portVoiceOperBreakRatio mandatory The break ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.31 |
| portVoiceOperDTMFOnDuration mandatory The length of a tone that will be used to produce a
single DTMF digit. This is applicable only when forwarded
output digits is all or extended and forwarded digit type
is DTMF. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.32 |
| portVoiceOperDTMFOffDuration mandatory The length of silence between DTMF tones in a dial digit
string. This is applicable only when forwarded output digits
is all or extended and forwarded digit type is DTMF. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.33 |
| portVoiceOperToneType mandatory The tone type to detect/regenerate for forwarding DTMF/MF. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.34 |
| portVoiceOperSpeed mandatory The speed of the port which is transmitted as part
of a Call Setup frame. A Voice call will be established
if there is enough bandwidth at each end to provide the
minimum configur… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.4 |
| portVoiceOperDTMF mandatory The flag to enable, disable, or specify a time span
over which DTMF (Dual Tone Multi Frequency) tones will
be regenerated.
0 = pass tones transparently to the remote device.
1… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.5 |
| portVoiceOperInterface mandatory The type of interface (in conjunction with the Telephony
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony T… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.2.1.6 |
| portVoiceOperTETimer mandatory The delay at which the E&M 'E' lead follows the 'M' lead. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.7 |
| portVoiceOperLevelIn mandatory The local voice level into the voice port. This adjusts
the sensitivity of the local voice channel to the signal
from the attached device. The purpose of this is to match
the voic… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.8 |
| portVoiceOperLevelOut mandatory The local voice level out of the voice port. A more
positive setting produces a higher volume. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.2.1.9 |