portBsciOperNAKRetryCount
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.4.2.1.25
Object
column
mandatory
Integer32
Specifies the number of times the Netlink device will send a frame when the receiving device is unable to acknowledge.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.4.2.1.25- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portBsciOperEntry
- Table
- portBsciOperTable
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portBsciOperBlockedFlag mandatory Causes the port to be enabled or disabled at node IPL. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.1 |
| portBsciOperUseEBCDIC mandatory Specifies whether all devices on a line use the same
character set for successive session polls. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.10 |
| portBsciOperCallInfoInRequestPacket mandatory Specifies whether the user will have the option of
including call information in a call request packet. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.11 |
| portBsciOperClearVCOnLastDeviceDown mandatory Causes the virtual circuit to be cleared when no
terminals are using it. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.12 |
| portBsciOperTransTextSupported mandatory Causes all characters transmitted to be treated as data. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.13 |
| portBsciOperEndToEndAck mandatory Allows management of acknowledgments end to end across
the network rather than locally at each end. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.14 |
| portBsciOperFullDuplex mandatory Specifies full-duplex transmission. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.15 |
| portBsciOperMultidrop mandatory Specifies whether transmission will be multidrop. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.16 |
| portBsciOperSlowPollRetryCount mandatory Specifies how many times the control unit will be polled
before it is put on the slow poll list. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.17 |
| portBsciOperSlowPollRetryFreq mandatory Specifies the number of times active control units will
be polled between pollings on the slow poll list. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.18 |
| portBsciOperStartSynchChars mandatory Specifies the number of synchronization characters
that will be added to the beginning of each frame. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.19 |
| portBsciOperConnector mandatory Physical port interface connector type. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.2 |
| portBsciOperEndPadChars mandatory Specifies the number of padding characters that will
be added to the end of each frame. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.20 |
| portBsciOperPollInterval mandatory Specifies the time between passes through the polling list. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.21 |
| portBsciOperNoResponseTimer mandatory Activated after transmission of a general poll or a
data frame. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.22 |
| portBsciOperNoResponseRetryCount mandatory Specifies how many times the user device will be polled
before control is passed on the next cluster. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.23 |
| portBsciOperErrorRetransmitCount mandatory Specifies the number of times the Netlink device will
resend a block of data after the receiving device has
detected an error in that block. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.24 |
| portBsciOperBlockCheck mandatory Sets the redundancy check parameter. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.26 |
| portBsciOperDataMode mandatory Sets the parity parameter. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.27 |
| portBsciOperAnswerNonConfigured mandatory Only valid if pad type is HPAD. If yes, the HPAD will
respond to all devices on the line. If no, the HPAD will
respond only to those devices that are configured on the
node. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.28 |
| portBsciOperActivateConnectionWithoutPoll mandatory Only valid if pad type is TPAD. If yes, will active the
TPAD connection without a poll of the connected device. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.29 |
| portBsciOperSpeed mandatory Data transmission rate in bits per second. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.3 |
| portBsciOperRetransmitInterval mandatory Length of time before the node will transmit an I-frame
if the previous transmission is not acknowledged. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.4 |
| portBsciOperMAXRetransmits mandatory Maximum number of times the node will attempt to send
an I-frame after a retransmission period expiration. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.5 |
| portBsciOperMaxBytesPerFrame mandatory Maximum frame size that will be transmitted on the port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.4.2.1.6 |
| portBsciOperGenerateClock mandatory Specifies whether the port will generate the clock
necessary to synchronize traffic over the link. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.7 |
| portBsciOperRcvClockFromDTE mandatory Allows the clock to be looped back from the DTE
using the TT (Terminal Timing) signal. | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.8 |
| portBsciOperPadType mandatory BSCI Pad Type | column | Enumeration | .1.3.6.1.4.1.173.7.3.4.2.1.9 |