portFrEntry

NETLINK-SPECIFIC-MIB · .1.3.6.1.4.1.173.7.3.2.1.1

MIB view Table view

Object

row mandatory

An Frame Relay Port entry containing objects
relating to the port that are configurable
by the user.

Context

MIB: NETLINK-SPECIFIC-MIB
OID: .1.3.6.1.4.1.173.7.3.2.1.1
Type: row
Status: mandatory
Parent: portFrConfigTable
Table: portFrConfigTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
portFrRlpIndex mandatory The RLP number of the Frame Relay port. It will be in the range 1-8.	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.1`
portFrGenClock mandatory This specifies whether the port will generate the clock necessary to synchronize traffic over the link.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.10`
portFrRcvClkFrmDTE mandatory This allows the clock to be looped back from the DTE using the TT (Terminal Timing) signal, which can be helpful on high-speed lines.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.11`
portFrLLM mandatory This determines whether, and what type of, configurable network management (status enquiries) will be allowed.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.12`
portFrRowStatus mandatory This variable is used to manage the creation and deletion of conceptual rows in the portFrConfigTable and follows the SNMPv2 RowStatus conventions by supporting the following valu…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.173.7.3.2.1.1.13`
portFrSpeed mandatory This object defines the speed of the Frame Relay port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value wh…	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.14`
portFrBackupUseOnly mandatory This object determines whether all DLCIs on the port will be reserved exclusively as backups for other DLCIs in the same node. If yes is specified for this object, the port will r…	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.15`
portFrPortIndex mandatory The Port number of the Frame Relay port. It will be in the range 1-8 for a physical port. It will be in the range 9-64 for a Frame Relay logical port.	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.2`
portFrBlockedFlag mandatory A flag which when set, means the port should not be enabled after a boot-up of the node.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.3`
portFrMaxBytesPerFrame mandatory The maximum number of bytes allowed in an I Frame for this Frame Relay port.	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.4`
portFrT392Timer mandatory This timer indicates how long the network will wait between Status Enquiry messages before recording an error. It should be greater than or equal to the frDlcmiPollingInterval va…	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.5`
portFrOutgoingRateControl mandatory This is a flag which, when set, enables the enforcement of the Outgoing Rate Control parameters.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.6`
portFrBandwidthAllocation mandatory This is a flag which, when set, enables whether the bandwidth allocation will be enforced.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.7`
portFrConnector mandatory This defines the connector type of the Frame Relay port.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.8`
portFrLogicalDCE mandatory This defines the port as logical DCE or DTE.	column	Enumeration	`.1.3.6.1.4.1.173.7.3.2.1.1.9`

Indexes

Object	Type	Syntax	OID
portFrRlpIndex mandatory The RLP number of the Frame Relay port. It will be in the range 1-8.	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.1`
portFrPortIndex mandatory The Port number of the Frame Relay port. It will be in the range 1-8 for a physical port. It will be in the range 9-64 for a Frame Relay logical port.	column	Integer32	`.1.3.6.1.4.1.173.7.3.2.1.1.2`