portPhyX25AdminTrunkGroup

NETLINK-SPECIFIC-MIB · .1.3.6.1.4.1.173.7.3.1.1.1.10
MIB view Table view

Object

column mandatory r/w OctetString 
This variable contains a string of 8 bytes, with each
byte indicating 8 ports on an RLP that may be a part of
a trunk group. Since a TurboFrad has only 1 RLP, only the
first byte is valid if the node is an FRX4000. Each
port is represented by a single bit within the RLP byte.
The bit position represents the port number...for example,
if port 2 on RLP 0 was in a trunk group, the first byte of
the string would contain x04 and all other bytes would be 0.

Context

MIB
NETLINK-SPECIFIC-MIB
OID
.1.3.6.1.4.1.173.7.3.1.1.1.10
Type
column
Access
readwrite
Status
mandatory
Parent
portPhyX25AdminEntry
Table
portPhyX25AdminTable
Siblings
10

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
portPhyX25AdminConnector mandatory
Physical port interface connector type.
columnEnumeration.1.3.6.1.4.1.173.7.3.1.1.1.1
portPhyX25AdminRowStatus mandatory
This variable is used to manage the creation and deletion of conceptual rows in the portPhyX25AdminTable and follows the SNMPv2 RowStatus conventions by supporting the following v…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.173.7.3.1.1.1.11
portPhyX25AdminSpeed mandatory
This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is …
columnInteger32.1.3.6.1.4.1.173.7.3.1.1.1.2
portPhyX25AdminGenerateClock mandatory
Specifies whether the port will generate the clock necessary to synchronize traffic over the link.
columnEnumeration.1.3.6.1.4.1.173.7.3.1.1.1.3
portPhyX25AdminRcvClockFromDTE mandatory
This object defines whether the receive clock will be used from the DTE.
columnEnumeration.1.3.6.1.4.1.173.7.3.1.1.1.4
portPhyX25AdminDialOut mandatory
This flag indicates whether the port is connected to a dial modem, and whethter connections will be initiated through dial-in or dial-out calls.
columnEnumeration.1.3.6.1.4.1.173.7.3.1.1.1.5
portPhyX25AdminInactivityTimer mandatory
This timer defines in minutes, the period of inactivity allowed between calls. Once the timer expires, the port is disabled untill the next call is placed, if a Dial out port, or …
columnInteger32.1.3.6.1.4.1.173.7.3.1.1.1.6
portPhyX25AdminDisconnectTimer mandatory
This timer defines, in seconds, the length of time a dial-in port will remain disabled after expiration of the InActivity Timer.
columnInteger32.1.3.6.1.4.1.173.7.3.1.1.1.7
portPhyX25AdminSetupTimer mandatory
This timer determines the length of time, in seconds, that a response must be received by the port, after entering the Linkup state. If a response is not received, the port enter…
columnInteger32.1.3.6.1.4.1.173.7.3.1.1.1.8
portPhyX25AdminTrunkFlag mandatory
This flag, when set, indicates the port is associated with a network trunk group. It will be disabled/enabled if the network trunk is not operational.
columnEnumeration.1.3.6.1.4.1.173.7.3.1.1.1.9